Re: [PATCH] pinctrl: cherryview: Do not mask all interrupts on probe

[Phidias Chiang <phidias.chiang@canonical.com>]

On Fri, Sep 09, 2016 at 09:18:34AM +0300, Mika Westerberg wrote:
> On Fri, Sep 09, 2016 at 12:28:43AM +0800, Phidias Chiang wrote:
> 
> Hmm, how can that happen? The patch removes clearing of INTMASK and only
> other place where it is cleared temporarily is on resume. Can you add
> dev_info() calls like:
> 
> 	/* Clear all interrupts */
> 	chv_writel(0xffff, pctrl->regs + CHV_INTSTAT);
> 	dev_info(pctrl->dev, "INTMASK0: 0x%08x\n", readl(pctrl->regs + CHV_INTMASK));
> 
> 	...
> 
> 	gpiochip_set_chained_irqchip(chip, &chv_gpio_irqchip, irq,
> 				     chv_gpio_irq_handler);
> 	dev_info(pctrl->dev, "INTMASK1: 0x%08x\n", readl(pctrl->regs + CHV_INTMASK));
> 	return 0;
> 
> It should print the same values both time.
> 
> Also which interrupt does not work and can you send me output of
> /proc/interrupts?

Output in dmesg:
[    2.054475] cherryview-pinctrl INT33FF:00: INTMASK0: 0x00000006
[    2.055247] cherryview-pinctrl INT33FF:00: INTMASK1: 0x00000000
[    2.055375] cherryview-pinctrl INT33FF:01: INTMASK0: 0x00004000
[    2.056931] cherryview-pinctrl INT33FF:01: INTMASK1: 0x00000000
[    2.057036] cherryview-pinctrl INT33FF:02: INTMASK0: 0x00000000
[    2.057367] cherryview-pinctrl INT33FF:02: INTMASK1: 0x00000000
[    2.057489] cherryview-pinctrl INT33FF:03: INTMASK0: 0x00000000
[    2.058337] cherryview-pinctrl INT33FF:03: INTMASK1: 0x00000000

So it's somehow got cleared in the process after.

And the following link is the complete /proc/interrupts:
http://pastebin.com/qwamyKZb

THe interrupt doesn't work is 9, when I made it work it responsed to
pressing hotkeys.