From: Pavel Machek <pavel@ucw.cz>
To: kernel list <linux-kernel@vger.kernel.org>,
daniel.vetter@intel.com, jani.nikula@linux.intel.com,
intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Subject: Re: 4.8-rc1: it is now common that machine needs re-run of xrandr after resume
Date: Tue, 13 Sep 2016 23:04:37 +0200 [thread overview]
Message-ID: <20160913210437.GA4097@amd> (raw)
In-Reply-To: <20160913202350.GA30707@amd>
[-- Attachment #1: Type: text/plain, Size: 882 bytes --]
Hi!
> I have
>
> 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
> Integrated Graphics Controller (rev 03)
>
> In previous kernels, resume worked ok. With 4.8-rc1, I quite often (1
> in 10 resumes?) get in state where primary monitor (DVI) is dead (in
> powersave) and all windows move to secondary monitor (VGA). Running
> "xrandr" fixes that.
>
> I'll update to newer rc and see if it happens again, but if you have
> any ideas, now would be good time.
Ok. With -rc6, X are completely broken. I got notification "could not
restore CRTC config for screen 63" or something like that, and window
manager just does not start.
X log is attached as delme, kernel log as delme2. Nothing too
suspicious :-(.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: delme --]
[-- Type: text/plain, Size: 30818 bytes --]
[ 227.978]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 227.978] X Protocol Version 11, Revision 0
[ 227.978] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 227.978] Current Operating System: Linux amd 4.8.0-rc6 #59 SMP Tue Sep 13 22:55:13 CEST 2016 x86_64
[ 227.978] Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-64/arch/x86/boot/bzImage root=PARTUUID=bdb19d30-04 resume=PARTUUID=bdb19d30-01
[ 227.978] Build Date: 11 February 2015 01:14:26AM
[ 227.978] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 227.978] Current version of pixman: 0.32.6
[ 227.979] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 227.979] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 227.979] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 13 23:01:42 2016
[ 227.979] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 227.979] (==) No Layout section. Using the first Screen section.
[ 227.979] (==) No screen section available. Using defaults.
[ 227.979] (**) |-->Screen "Default Screen Section" (0)
[ 227.979] (**) | |-->Monitor "<default monitor>"
[ 227.979] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 227.979] (==) Automatically adding devices
[ 227.979] (==) Automatically enabling devices
[ 227.979] (==) Automatically adding GPU devices
[ 227.979] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 227.979] Entry deleted from font path.
[ 227.980] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 227.980] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 227.980] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 227.980] (II) Loader magic: 0x5683b700
[ 227.980] (II) Module ABI versions:
[ 227.980] X.Org ANSI C Emulation: 0.4
[ 227.980] X.Org Video Driver: 18.0
[ 227.980] X.Org XInput driver : 21.0
[ 227.980] X.Org Server Extension : 8.0
[ 227.980] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 227.995] (--) PCI:*(0:0:2:0) 8086:2e32:8086:d614 rev 3, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f140/8, BIOS @ 0x????????/131072
[ 227.995] (--) PCI: (0:0:2:1) 8086:2e33:8086:d614 rev 3, Mem @ 0xd0400000/1048576
[ 227.995] (II) LoadModule: "glx"
[ 227.997] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 227.999] (II) Module glx: vendor="X.Org Foundation"
[ 227.999] compiled for 1.16.4, module version = 1.0.0
[ 227.999] ABI class: X.Org Server Extension, version 8.0
[ 227.999] (==) AIGLX enabled
[ 227.999] (==) Matched intel as autoconfigured driver 0
[ 227.999] (==) Matched intel as autoconfigured driver 1
[ 227.999] (==) Matched modesetting as autoconfigured driver 2
[ 227.999] (==) Matched fbdev as autoconfigured driver 3
[ 227.999] (==) Matched vesa as autoconfigured driver 4
[ 227.999] (==) Assigned the driver to the xf86ConfigLayout
[ 227.999] (II) LoadModule: "intel"
[ 227.999] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 228.000] (II) Module intel: vendor="X.Org Foundation"
[ 228.000] compiled for 1.15.99.904, module version = 2.21.15
[ 228.000] Module class: X.Org Video Driver
[ 228.000] ABI class: X.Org Video Driver, version 18.0
[ 228.000] (II) LoadModule: "modesetting"
[ 228.000] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 228.001] (II) Module modesetting: vendor="X.Org Foundation"
[ 228.001] compiled for 1.16.4, module version = 0.9.0
[ 228.001] Module class: X.Org Video Driver
[ 228.001] ABI class: X.Org Video Driver, version 18.0
[ 228.001] (II) LoadModule: "fbdev"
[ 228.001] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 228.001] (II) Module fbdev: vendor="X.Org Foundation"
[ 228.001] compiled for 1.15.99.904, module version = 0.4.4
[ 228.001] Module class: X.Org Video Driver
[ 228.002] ABI class: X.Org Video Driver, version 18.0
[ 228.002] (II) LoadModule: "vesa"
[ 228.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 228.002] (II) Module vesa: vendor="X.Org Foundation"
[ 228.002] compiled for 1.15.99.904, module version = 2.3.3
[ 228.002] Module class: X.Org Video Driver
[ 228.002] ABI class: X.Org Video Driver, version 18.0
[ 228.003] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 228.004] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 228.004] (II) FBDEV: driver for framebuffer: fbdev
[ 228.004] (II) VESA: driver for VESA chipsets: vesa
[ 228.004] (++) using VT number 7
[ 228.041] (WW) Falling back to old probe method for modesetting
[ 228.057] (WW) Falling back to old probe method for fbdev
[ 228.057] (II) Loading sub module "fbdevhw"
[ 228.057] (II) LoadModule: "fbdevhw"
[ 228.058] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 228.058] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 228.058] compiled for 1.16.4, module version = 0.0.2
[ 228.058] ABI class: X.Org Video Driver, version 18.0
[ 228.058] (WW) Falling back to old probe method for vesa
[ 228.074] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 228.074] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 228.074] (==) intel(0): RGB weight 888
[ 228.074] (==) intel(0): Default visual is TrueColor
[ 228.074] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 228.074] (**) intel(0): Relaxed fencing enabled
[ 228.074] (**) intel(0): Wait on SwapBuffers? enabled
[ 228.074] (**) intel(0): Triple buffering? enabled
[ 228.074] (**) intel(0): Framebuffer tiled
[ 228.074] (**) intel(0): Pixmaps tiled
[ 228.075] (**) intel(0): 3D buffers tiled
[ 228.075] (**) intel(0): SwapBuffers wait enabled
[ 228.075] (==) intel(0): video overlay key set to 0x101fe
[ 228.252] (II) intel(0): Output VGA1 has no monitor section
[ 228.572] (II) intel(0): Output HDMI1 has no monitor section
[ 228.572] (II) intel(0): Output DP1 has no monitor section
[ 228.736] (II) intel(0): EDID for output VGA1
[ 228.736] (II) intel(0): Manufacturer: DEL Model: a013 Serial#: 926494805
[ 228.736] (II) intel(0): Year: 2005 Week: 46
[ 228.736] (II) intel(0): EDID Version: 1.3
[ 228.736] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 228.736] (II) intel(0): Sync: Separate
[ 228.736] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 228.736] (II) intel(0): Gamma: 2.20
[ 228.736] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 228.736] (II) intel(0): Default color space is primary color space
[ 228.736] (II) intel(0): First detailed timing is preferred mode
[ 228.736] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 228.736] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 228.736] (II) intel(0): Supported established timings:
[ 228.736] (II) intel(0): 720x400@70Hz
[ 228.736] (II) intel(0): 640x480@60Hz
[ 228.736] (II) intel(0): 640x480@75Hz
[ 228.736] (II) intel(0): 800x600@60Hz
[ 228.736] (II) intel(0): 800x600@75Hz
[ 228.736] (II) intel(0): 1024x768@60Hz
[ 228.736] (II) intel(0): 1024x768@75Hz
[ 228.736] (II) intel(0): Manufacturer's mask: 0
[ 228.736] (II) intel(0): Supported detailed timing:
[ 228.736] (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 228.736] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 228.736] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 228.737] (II) intel(0): Serial No: JC1415B7790U
[ 228.737] (II) intel(0): Monitor name: DELL E156FP
[ 228.737] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 85 MHz
[ 228.737] (II) intel(0): EDID (in hex):
[ 228.737] (II) intel(0): 00ffffffffffff0010ac13a055303937
[ 228.737] (II) intel(0): 2e0f0103681e1778eeee91a3544c9926
[ 228.737] (II) intel(0): 0f5054a54a0001010101010101010101
[ 228.737] (II) intel(0): 01010101010164190040410026301888
[ 228.737] (II) intel(0): 360030e410000018000000ff004a4331
[ 228.737] (II) intel(0): 3431354237373930550a000000fc0044
[ 228.737] (II) intel(0): 454c4c204531353646500a20000000fd
[ 228.737] (II) intel(0): 00384b1e3d08000a202020202020006b
[ 228.737] (II) intel(0): Printing probed modes for output VGA1
[ 228.737] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 228.737] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 228.737] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 228.737] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 228.737] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 228.737] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 228.737] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 229.056] (II) intel(0): EDID for output HDMI1
[ 229.056] (II) intel(0): Manufacturer: FUS Model: 80a Serial#: 5875
[ 229.056] (II) intel(0): Year: 2011 Week: 21
[ 229.056] (II) intel(0): EDID Version: 1.3
[ 229.056] (II) intel(0): Digital Display Input
[ 229.056] (II) intel(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 229.056] (II) intel(0): Gamma: 2.20
[ 229.056] (II) intel(0): DPMS capabilities: Off
[ 229.056] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 229.056] (II) intel(0): First detailed timing is preferred mode
[ 229.056] (II) intel(0): redX: 0.637 redY: 0.330 greenX: 0.316 greenY: 0.620
[ 229.056] (II) intel(0): blueX: 0.153 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 229.056] (II) intel(0): Supported established timings:
[ 229.056] (II) intel(0): 720x400@70Hz
[ 229.056] (II) intel(0): 640x480@60Hz
[ 229.056] (II) intel(0): 640x480@75Hz
[ 229.056] (II) intel(0): 800x600@60Hz
[ 229.056] (II) intel(0): 800x600@75Hz
[ 229.056] (II) intel(0): 1024x768@60Hz
[ 229.056] (II) intel(0): 1024x768@75Hz
[ 229.056] (II) intel(0): 1280x1024@75Hz
[ 229.056] (II) intel(0): Manufacturer's mask: 0
[ 229.056] (II) intel(0): Supported standard timings:
[ 229.056] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 229.056] (II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 229.056] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 229.056] (II) intel(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 229.056] (II) intel(0): Supported detailed timing:
[ 229.056] (II) intel(0): clock: 148.5 MHz Image Size: 478 x 268 mm
[ 229.057] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 229.057] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 229.057] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 165 MHz
[ 229.057] (II) intel(0): Monitor name: L22T-3 LED
[ 229.057] (II) intel(0): Serial No: YV5F005875
[ 229.057] (II) intel(0): EDID (in hex):
[ 229.057] (II) intel(0): 00ffffffffffff001ab30a08f3160000
[ 229.057] (II) intel(0): 1515010380301b782a2355a354519e27
[ 229.057] (II) intel(0): 115054a54b008180a9409500b3000101
[ 229.057] (II) intel(0): 010101010101023a801871382d40582c
[ 229.057] (II) intel(0): 4500de0c1100001e000000fd00384c1e
[ 229.057] (II) intel(0): 5210000a202020202020000000fc004c
[ 229.057] (II) intel(0): 3232542d33204c45440a2020000000ff
[ 229.057] (II) intel(0): 00595635463030353837350a2020003d
[ 229.057] (II) intel(0): Printing probed modes for output HDMI1
[ 229.057] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 229.057] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 229.057] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 229.057] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 229.057] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 229.057] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 229.057] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 229.057] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 229.057] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 229.057] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 229.057] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 229.057] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 229.057] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 229.057] (II) intel(0): EDID for output DP1
[ 229.057] (II) intel(0): Output VGA1 connected
[ 229.057] (II) intel(0): Output HDMI1 connected
[ 229.058] (II) intel(0): Output DP1 disconnected
[ 229.058] (II) intel(0): Using exact sizes for initial modes
[ 229.058] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 229.058] (II) intel(0): Output HDMI1 using initial mode 1024x768
[ 229.058] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 229.058] (II) intel(0): Kernel page flipping support detected, enabling
[ 229.058] (==) intel(0): DPI set to (96, 96)
[ 229.058] (II) Loading sub module "fb"
[ 229.058] (II) LoadModule: "fb"
[ 229.058] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 229.058] (II) Module fb: vendor="X.Org Foundation"
[ 229.058] compiled for 1.16.4, module version = 1.0.0
[ 229.058] ABI class: X.Org ANSI C Emulation, version 0.4
[ 229.058] (II) Loading sub module "dri2"
[ 229.058] (II) LoadModule: "dri2"
[ 229.058] (II) Module "dri2" already built-in
[ 229.058] (II) UnloadModule: "modesetting"
[ 229.059] (II) Unloading modesetting
[ 229.059] (II) UnloadModule: "fbdev"
[ 229.059] (II) Unloading fbdev
[ 229.059] (II) UnloadSubModule: "fbdevhw"
[ 229.059] (II) Unloading fbdevhw
[ 229.059] (II) UnloadModule: "vesa"
[ 229.059] (II) Unloading vesa
[ 229.059] (==) Depth 24 pixmap format is 32 bpp
[ 229.059] (II) intel(0): [DRI2] Setup complete
[ 229.059] (II) intel(0): [DRI2] DRI driver: i965
[ 229.059] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 229.078] (II) UXA(0): Driver registered support for the following operations:
[ 229.078] (II) solid
[ 229.078] (II) copy
[ 229.078] (II) composite (RENDER acceleration)
[ 229.078] (II) put_image
[ 229.078] (II) get_image
[ 229.078] (==) intel(0): Backing store enabled
[ 229.078] (==) intel(0): Silken mouse enabled
[ 229.078] (II) intel(0): Initializing HW Cursor
[ 229.078] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 229.125] (==) intel(0): DPMS enabled
[ 229.125] (==) intel(0): Intel XvMC decoder enabled
[ 229.125] (II) intel(0): Set up textured video
[ 229.125] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 229.125] (II) intel(0): direct rendering: DRI2 Enabled
[ 229.125] (==) intel(0): hotplug detection: "enabled"
[ 229.229] (--) RandR disabled
[ 229.241] (II) SELinux: Disabled on system
[ 229.247] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 229.247] (II) AIGLX: enabled GLX_ARB_create_context
[ 229.247] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 229.247] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 229.247] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 229.247] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 229.247] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 229.247] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 229.247] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 229.247] (II) AIGLX: Loaded and initialized i965
[ 229.247] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 229.248] (II) intel(0): Setting screen physical size to 270 x 203
[ 229.287] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 229.287] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 229.287] (II) LoadModule: "evdev"
[ 229.288] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 229.288] (II) Module evdev: vendor="X.Org Foundation"
[ 229.288] compiled for 1.16.0, module version = 2.9.0
[ 229.288] Module class: X.Org XInput Driver
[ 229.288] ABI class: X.Org XInput driver, version 21.0
[ 229.288] (II) Using input driver 'evdev' for 'Power Button'
[ 229.288] (**) Power Button: always reports core events
[ 229.288] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 229.288] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 229.288] (--) evdev: Power Button: Found keys
[ 229.288] (II) evdev: Power Button: Configuring as keyboard
[ 229.288] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 229.288] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 229.288] (**) Option "xkb_rules" "evdev"
[ 229.288] (**) Option "xkb_model" "pc105"
[ 229.289] (**) Option "xkb_layout" "us"
[ 229.290] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 229.290] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 229.290] (II) Using input driver 'evdev' for 'Video Bus'
[ 229.290] (**) Video Bus: always reports core events
[ 229.290] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 229.290] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 229.290] (--) evdev: Video Bus: Found keys
[ 229.290] (II) evdev: Video Bus: Configuring as keyboard
[ 229.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 229.290] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 229.290] (**) Option "xkb_rules" "evdev"
[ 229.290] (**) Option "xkb_model" "pc105"
[ 229.290] (**) Option "xkb_layout" "us"
[ 229.291] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 229.291] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 229.291] (II) Using input driver 'evdev' for 'Power Button'
[ 229.291] (**) Power Button: always reports core events
[ 229.291] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 229.291] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 229.291] (--) evdev: Power Button: Found keys
[ 229.291] (II) evdev: Power Button: Configuring as keyboard
[ 229.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 229.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 229.291] (**) Option "xkb_rules" "evdev"
[ 229.291] (**) Option "xkb_model" "pc105"
[ 229.291] (**) Option "xkb_layout" "us"
[ 229.293] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event4)
[ 229.293] (II) No input driver specified, ignoring this device.
[ 229.293] (II) This device may have been added with another device file.
[ 229.293] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 229.293] (II) No input driver specified, ignoring this device.
[ 229.293] (II) This device may have been added with another device file.
[ 229.294] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event6)
[ 229.294] (II) No input driver specified, ignoring this device.
[ 229.294] (II) This device may have been added with another device file.
[ 229.295] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event7)
[ 229.295] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 229.295] (II) Using input driver 'evdev' for 'Chicony USB Keyboard'
[ 229.295] (**) Chicony USB Keyboard: always reports core events
[ 229.295] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event7"
[ 229.295] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x111
[ 229.295] (--) evdev: Chicony USB Keyboard: Found keys
[ 229.295] (II) evdev: Chicony USB Keyboard: Configuring as keyboard
[ 229.295] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.1/1-7.1.1:1.0/0003:04F2:0111.0001/input/input10/event7"
[ 229.295] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 9)
[ 229.295] (**) Option "xkb_rules" "evdev"
[ 229.295] (**) Option "xkb_model" "pc105"
[ 229.295] (**) Option "xkb_layout" "us"
[ 229.297] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event8)
[ 229.297] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 229.297] (II) Using input driver 'evdev' for 'Chicony USB Keyboard'
[ 229.297] (**) Chicony USB Keyboard: always reports core events
[ 229.297] (**) evdev: Chicony USB Keyboard: Device: "/dev/input/event8"
[ 229.297] (--) evdev: Chicony USB Keyboard: Vendor 0x4f2 Product 0x111
[ 229.297] (--) evdev: Chicony USB Keyboard: Found keys
[ 229.297] (II) evdev: Chicony USB Keyboard: Configuring as keyboard
[ 229.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.1/1-7.1.1:1.1/0003:04F2:0111.0002/input/input11/event8"
[ 229.297] (II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD, id 10)
[ 229.297] (**) Option "xkb_rules" "evdev"
[ 229.297] (**) Option "xkb_model" "pc105"
[ 229.297] (**) Option "xkb_layout" "us"
[ 229.298] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event9)
[ 229.298] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 229.298] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 229.298] (**) Logitech USB Optical Mouse: always reports core events
[ 229.298] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event9"
[ 229.298] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 229.298] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 229.298] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 229.298] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 229.298] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 229.298] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 229.298] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 229.298] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 229.299] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 229.299] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.1/1-7.1.2/1-7.1.2:1.0/0003:046D:C05A.0003/input/input12/event9"
[ 229.299] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 229.299] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 229.299] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 229.299] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 229.300] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 229.300] (II) No input driver specified, ignoring this device.
[ 229.300] (II) This device may have been added with another device file.
[ 229.301] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 229.301] (II) No input driver specified, ignoring this device.
[ 229.301] (II) This device may have been added with another device file.
[ 231.508] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 232.562] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 232.836] (II) intel(0): EDID vendor "DEL", prod id 40979
[ 232.836] (II) intel(0): Using EDID range info for horizontal sync
[ 232.836] (II) intel(0): Using EDID range info for vertical refresh
[ 232.836] (II) intel(0): Printing DDC gathered Modelines:
[ 232.836] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 232.836] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 232.836] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 232.836] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 232.836] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 232.836] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 232.836] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 233.472] (II) intel(0): EDID vendor "DEL", prod id 40979
[ 233.472] (II) intel(0): Using hsync ranges from config file
[ 233.472] (II) intel(0): Using vrefresh ranges from config file
[ 233.472] (II) intel(0): Printing DDC gathered Modelines:
[ 233.472] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 233.472] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 233.472] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 233.472] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 233.472] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 233.472] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 233.472] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 233.976] (II) intel(0): EDID vendor "DEL", prod id 40979
[ 233.976] (II) intel(0): Using hsync ranges from config file
[ 233.976] (II) intel(0): Using vrefresh ranges from config file
[ 233.976] (II) intel(0): Printing DDC gathered Modelines:
[ 233.976] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 233.976] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 233.976] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 233.976] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 233.976] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 233.976] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 233.976] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 234.452] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 234.547] (II) intel(0): Allocated new frame buffer 1920x1848 stride 7680, tiled
[ 234.547] (EE) intel(0): failed to set mode: Permission denied
[ 235.093] (II) intel(0): Allocated new frame buffer 1920x1848 stride 7680, tiled
[ 235.093] (EE) intel(0): failed to set mode: Permission denied
[ 237.189] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 237.444] (II) intel(0): EDID vendor "DEL", prod id 40979
[ 237.444] (II) intel(0): Using hsync ranges from config file
[ 237.444] (II) intel(0): Using vrefresh ranges from config file
[ 237.444] (II) intel(0): Printing DDC gathered Modelines:
[ 237.444] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 237.444] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 237.444] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 237.444] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 237.444] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 237.444] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 237.444] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 252.652] (II) AIGLX: Suspending AIGLX clients for VT switch
[-- Attachment #3: delme2.gz --]
[-- Type: application/gzip, Size: 15122 bytes --]
next prev parent reply other threads:[~2016-09-13 21:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-13 20:23 4.8-rc1: it is now common that machine needs re-run of xrandr after resume Pavel Machek
2016-09-13 20:38 ` Martin Steigerwald
2016-09-13 20:38 ` Martin Steigerwald
2016-09-14 7:43 ` Pavel Machek
2016-09-14 7:43 ` Pavel Machek
2016-09-14 10:03 ` Jani Nikula
2016-09-13 21:04 ` Pavel Machek [this message]
2016-09-14 7:38 ` Jani Nikula
2016-09-14 7:38 ` Jani Nikula
2016-09-14 7:45 ` Jani Nikula
2016-09-14 7:45 ` Jani Nikula
2016-09-14 7:54 ` Pavel Machek
2016-09-14 7:54 ` Pavel Machek
2016-09-14 9:17 ` Jani Nikula
2016-09-14 11:14 ` Jani Nikula
2016-09-14 11:14 ` Jani Nikula
2016-09-15 15:34 ` Martin Steigerwald
2016-09-15 15:34 ` Martin Steigerwald
2016-09-16 6:57 ` Jani Nikula
2016-10-18 14:13 ` Pavel Machek
2016-10-18 14:13 ` Pavel Machek
2016-09-14 11:32 ` Martin Steigerwald
2016-09-14 11:32 ` Martin Steigerwald
2016-09-14 10:33 ` [Intel-gfx] " Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160913210437.GA4097@amd \
--to=pavel@ucw.cz \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.