All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Cochran <richardcochran@gmail.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org, Mugunthan V N <mugunthanvnm@ti.com>,
	Sekhar Nori <nsekhar@ti.com>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	WingMan Kwok <w-kwok2@ti.com>
Subject: Re: [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period
Date: Wed, 14 Sep 2016 16:25:03 +0200	[thread overview]
Message-ID: <20160914142503.GF28592@localhost.localdomain> (raw)
In-Reply-To: <20160914130231.3035-9-grygorii.strashko@ti.com>

On Wed, Sep 14, 2016 at 04:02:30PM +0300, Grygorii Strashko wrote:
> @@ -427,9 +427,6 @@ static void cpts_calc_mult_shift(struct cpts *cpts)
>  	u64 ns;
>  	u64 frac;
>  
> -	if (cpts->cc_mult || cpts->cc.shift)
> -		return;
> -
>  	freq = clk_get_rate(cpts->refclk);
>  
>  	/* Calc the maximum number of seconds which we can run before

This hunk has nothing to do with $subject.

> @@ -442,11 +439,20 @@ static void cpts_calc_mult_shift(struct cpts *cpts)
>  	else if (maxsec > 600 && cpts->cc.mask > UINT_MAX)
>  		maxsec = 600;
>  
> +	/* Calc overflow check period (maxsec / 2) */
> +	cpts->ov_check_period = (HZ * maxsec) / 2;
> +	dev_info(cpts->dev, "cpts: overflow check period %lu\n",
> +		 cpts->ov_check_period);
> +
> +	if (cpts->cc_mult || cpts->cc.shift)
> +		return;
> +
>  	clocks_calc_mult_shift(&mult, &shift, freq, NSEC_PER_SEC, maxsec);
>  
>  	cpts->cc_mult = mult;
>  	cpts->cc.mult = mult;
>  	cpts->cc.shift = shift;
> +

Nor does this.

Thanks,
Richard


>  	/* Check calculations and inform if not precise */
>  	frac = 0;
>  	ns = cyclecounter_cyc2ns(&cpts->cc, freq, cpts->cc.mask, &frac);
> diff --git a/drivers/net/ethernet/ti/cpts.h b/drivers/net/ethernet/ti/cpts.h
> index 47026ec..e0e4a62b 100644
> --- a/drivers/net/ethernet/ti/cpts.h
> +++ b/drivers/net/ethernet/ti/cpts.h
> @@ -97,9 +97,6 @@ enum {
>  	CPTS_EV_TX,   /* Ethernet Transmit Event */
>  };
>  
> -/* This covers any input clock up to about 500 MHz. */
> -#define CPTS_OVERFLOW_PERIOD (HZ * 8)
> -
>  #define CPTS_FIFO_DEPTH 16
>  #define CPTS_MAX_EVENTS 32
>  
> @@ -127,6 +124,7 @@ struct cpts {
>  	struct list_head events;
>  	struct list_head pool;
>  	struct cpts_event pool_data[CPTS_MAX_EVENTS];
> +	unsigned long ov_check_period;
>  };
>  
>  int cpts_rx_timestamp(struct cpts *cpts, struct sk_buff *skb);
> -- 
> 2.9.3
> 

  reply	other threads:[~2016-09-14 14:25 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-14 13:02 [PATCH 0/9] net: ethernet: ti: cpts: update and fixes Grygorii Strashko
2016-09-14 13:02 ` Grygorii Strashko
2016-09-14 13:02 ` [PATCH 1/9] net: ethernet: ti: exclude cpts from build when disabled Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 13:02 ` [PATCH 2/9] net: ethernet: ti: cpsw: minimize direct access to struct cpts Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 13:02 ` [PATCH 3/9] net: ethernet: ti: cpts: rework initialization/deinitialization Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 13:52   ` Richard Cochran
2016-09-14 20:10     ` Grygorii Strashko
2016-09-14 20:10       ` Grygorii Strashko
2016-09-14 20:32       ` Richard Cochran
2016-09-14 20:37         ` Grygorii Strashko
2016-09-14 20:37           ` Grygorii Strashko
2016-09-14 20:52           ` Richard Cochran
2016-09-14 20:59             ` Grygorii Strashko
2016-09-14 20:59               ` Grygorii Strashko
2016-09-15  8:13   ` Richard Cochran
2016-09-14 13:02 ` [PATCH 4/9] net: ethernet: ti: cpts: move dt props parsing to cpts driver Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 13:55   ` Richard Cochran
2016-09-14 19:45     ` Grygorii Strashko
2016-09-14 19:45       ` Grygorii Strashko
2016-09-14 20:03       ` Richard Cochran
2016-09-14 13:02 ` [PATCH 5/9] net: ethernet: ti: cpts: add return value to tx and rx timestamp funcitons Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 14:00   ` Richard Cochran
2016-09-14 13:02 ` [PATCH 6/9] net: ethernet: ti: cpts: clean up event list if event pool is empty Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 14:14   ` Richard Cochran
2016-09-14 19:54     ` Grygorii Strashko
2016-09-14 19:54       ` Grygorii Strashko
2016-09-14 13:02 ` [PATCH 7/9] net: ethernet: ti: cpts: calc mult and shift from refclk freq Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 14:22   ` Richard Cochran
2016-09-14 19:59     ` Grygorii Strashko
2016-09-14 19:59       ` Grygorii Strashko
2016-09-14 20:26   ` Richard Cochran
2016-09-14 20:47     ` Grygorii Strashko
2016-09-14 20:47       ` Grygorii Strashko
2016-09-14 21:03       ` Richard Cochran
2016-09-14 21:14         ` Grygorii Strashko
2016-09-14 21:14           ` Grygorii Strashko
2016-09-15 11:58     ` Richard Cochran
2016-09-15 13:49       ` Richard Cochran
2016-09-14 13:02 ` [PATCH 8/9] net: ethernet: ti: cpts: fix overflow check period Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko
2016-09-14 14:25   ` Richard Cochran [this message]
2016-09-14 20:03     ` Grygorii Strashko
2016-09-14 20:03       ` Grygorii Strashko
2016-09-14 20:08       ` Richard Cochran
2016-09-14 20:23         ` Grygorii Strashko
2016-09-14 20:23           ` Grygorii Strashko
2016-09-14 20:43           ` Richard Cochran
2016-09-14 20:48             ` Grygorii Strashko
2016-09-14 20:48               ` Grygorii Strashko
2016-09-14 13:02 ` [PATCH 9/9] net: ethernet: ti: cpts: switch to readl/writel_relaxed() Grygorii Strashko
2016-09-14 13:02   ` Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160914142503.GF28592@localhost.localdomain \
    --to=richardcochran@gmail.com \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=w-kwok2@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.