[RFC v7 05/23] clocksource: h8300_timer8: don't reset rate in ->set_state_oneshot()

[Nicolai Stange <nicstange@gmail.com>]

With the upcoming NTP correction related rate adjustments to be implemented
in the clockevents core, the latter needs to get informed about every rate
change of a clockevent device made after its registration.

Currently, h8300_timer8 violates this requirement in that it registers its
clockevent device with the correct rate, but resets its ->mult and ->rate
values in timer8_clock_event_start(), called from its ->set_state_oneshot()
function.

It seems like
  commit 4633f4cac85a ("clocksource/drivers/h8300: Cleanup startup and
                        remove module code."),
which introduced the rate initialization at registration, missed to remove
the manual setting of ->mult and ->shift from timer8_clock_event_start().

Purge the setting of ->mult, ->shift, ->min_delta_ns and ->max_delta_ns
from timer8_clock_event_start().

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
---

Notes:
    Compile-only tested on ARCH=h8300.

 drivers/clocksource/h8300_timer8.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 546bb18..804c489 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -101,15 +101,7 @@ static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
 
 static void timer8_clock_event_start(struct timer8_priv *p, unsigned long delta)
 {
-	struct clock_event_device *ced = &p->ced;
-
 	timer8_start(p);
-
-	ced->shift = 32;
-	ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
-	ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
-	ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
-
 	timer8_set_next(p, delta);
 }
 
-- 
2.10.0