Re: [Qemu-devel] [PATCH v8 03/12] vhdx: Use QEMU UUID API

[Jeff Cody <jcody@redhat.com>]

On Sun, Sep 18, 2016 at 12:25:23PM +0800, Fam Zheng wrote:
> This removes our dependency to libuuid, so that the driver can always be
> built.
> 
> Similar to how we handled data plane configure options, --enable-vhdx
> and --disable-vhdx are also changed to a nop with a message saying it's
> obsolete.
> 
> Signed-off-by: Fam Zheng <famz@redhat.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
>  block/Makefile.objs |  2 +-
>  block/vhdx-endian.c |  3 ---
>  block/vhdx.c        |  9 ++++-----
>  configure           | 27 +++------------------------
>  4 files changed, 8 insertions(+), 33 deletions(-)
> 
> diff --git a/block/Makefile.objs b/block/Makefile.objs
> index 55da626..f23ee18 100644
> --- a/block/Makefile.objs
> +++ b/block/Makefile.objs
> @@ -2,7 +2,7 @@ block-obj-y += raw_bsd.o qcow.o vdi.o vmdk.o cloop.o bochs.o vpc.o vvfat.o
>  block-obj-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
>  block-obj-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
>  block-obj-y += qed-check.o
> -block-obj-$(CONFIG_VHDX) += vhdx.o vhdx-endian.o vhdx-log.o
> +block-obj-y += vhdx.o vhdx-endian.o vhdx-log.o
>  block-obj-y += quorum.o
>  block-obj-y += parallels.o blkdebug.o blkverify.o blkreplay.o
>  block-obj-y += block-backend.o snapshot.o qapi.o
> diff --git a/block/vhdx-endian.c b/block/vhdx-endian.c
> index c306b90..429d755 100644
> --- a/block/vhdx-endian.c
> +++ b/block/vhdx-endian.c
> @@ -21,9 +21,6 @@
>  #include "qemu/bswap.h"
>  #include "block/vhdx.h"
>  
> -#include <uuid/uuid.h>
> -
> -
>  /*
>   * All the VHDX formats on disk are little endian - the following
>   * are helper import/export functions to correctly convert
> diff --git a/block/vhdx.c b/block/vhdx.c
> index 75ef2b1..0ba2f0a 100644
> --- a/block/vhdx.c
> +++ b/block/vhdx.c
> @@ -25,8 +25,7 @@
>  #include "qemu/bswap.h"
>  #include "block/vhdx.h"
>  #include "migration/migration.h"
> -
> -#include <uuid/uuid.h>
> +#include "qemu/uuid.h"
>  
>  /* Options for VHDX creation */
>  
> @@ -213,11 +212,11 @@ bool vhdx_checksum_is_valid(uint8_t *buf, size_t size, int crc_offset)
>   */
>  void vhdx_guid_generate(MSGUID *guid)
>  {
> -    uuid_t uuid;
> +    QemuUUID uuid;
>      assert(guid != NULL);
>  
> -    uuid_generate(uuid);
> -    memcpy(guid, uuid, sizeof(MSGUID));
> +    qemu_uuid_generate(&uuid);
> +    memcpy(guid, &uuid, sizeof(MSGUID));
>  }
>  
>  /* Check for region overlaps inside the VHDX image */
> diff --git a/configure b/configure
> index 7d083bd..b71b80a 100755
> --- a/configure
> +++ b/configure
> @@ -317,7 +317,6 @@ vte=""
>  virglrenderer=""
>  tpm="yes"
>  libssh2=""
> -vhdx=""
>  numa=""
>  tcmalloc="no"
>  jemalloc="no"
> @@ -1103,6 +1102,9 @@ for opt do
>    --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
>        echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
>    ;;
> +  --enable-vhdx|--disable-vhdx)
> +      echo "$0: $opt is obsolete, VHDX driver is always built" >&2
> +  ;;
>    --disable-gtk) gtk="no"
>    ;;
>    --enable-gtk) gtk="yes"
> @@ -1143,10 +1145,6 @@ for opt do
>    ;;
>    --enable-libssh2) libssh2="yes"
>    ;;
> -  --enable-vhdx) vhdx="yes"
> -  ;;
> -  --disable-vhdx) vhdx="no"
> -  ;;
>    --disable-numa) numa="no"
>    ;;
>    --enable-numa) numa="yes"
> @@ -1389,7 +1387,6 @@ disabled with --disable-FEATURE, default is enabled if available:
>    archipelago     Archipelago backend
>    tpm             TPM support
>    libssh2         ssh block device support
> -  vhdx            support for the Microsoft VHDX image format
>    numa            libnuma support
>    tcmalloc        tcmalloc support
>    jemalloc        jemalloc support
> @@ -2690,19 +2687,6 @@ EOF
>    fi
>  fi
>  
> -if test "$vhdx" = "yes" ; then
> -    if test "$uuid" = "no" ; then
> -        error_exit "uuid required for VHDX support"
> -    fi
> -elif test "$vhdx" != "no" ; then
> -    if test "$uuid" = "yes" ; then
> -        vhdx=yes
> -    else
> -        vhdx=no
> -    fi
> -fi
> -
> -##########################################
>  # xfsctl() probe, used for raw-posix
>  if test "$xfs" != "no" ; then
>    cat > $TMPC << EOF
> @@ -4918,7 +4902,6 @@ echo "TPM support       $tpm"
>  echo "libssh2 support   $libssh2"
>  echo "TPM passthrough   $tpm_passthrough"
>  echo "QOM debugging     $qom_cast_debug"
> -echo "vhdx              $vhdx"
>  echo "lzo support       $lzo"
>  echo "snappy support    $snappy"
>  echo "bzip2 support     $bzip2"
> @@ -5443,10 +5426,6 @@ if test "$libssh2" = "yes" ; then
>    echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
>  fi
>  
> -if test "$vhdx" = "yes" ; then
> -  echo "CONFIG_VHDX=y" >> $config_host_mak
> -fi
> -
>  # USB host support
>  if test "$libusb" = "yes"; then
>    echo "HOST_USB=libusb legacy" >> $config_host_mak
> -- 
> 2.7.4
> 

Reviewed-by: Jeff Cody <jcody@redhat.com>