From: Yang Ling <gnaygnil@gmail.com>
To: wim@iguana.be, linux@roeck-us.net, keguang.zhang@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-mips@linux-mips.org, gnaygnil@gmail.com
Subject: [PATCH v1 1/2] watchdog: loongson1: Add Loongson1 SoC watchdog driver
Date: Tue, 11 Oct 2016 10:58:31 +0800 [thread overview]
Message-ID: <20161011025831.GA25649@ly-pc> (raw)
Add watchdog timer specific driver for Loongson1 SoC.
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
---
drivers/watchdog/Kconfig | 7 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/loongson1_wdt.c | 158 +++++++++++++++++++++++++++++++++++++++
3 files changed, 166 insertions(+)
create mode 100644 drivers/watchdog/loongson1_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 50dbaa8..28c44f2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1553,6 +1553,13 @@ config PIC32_DMT
To compile this driver as a loadable module, choose M here.
The module will be called pic32-dmt.
+config LOONGSON1_WDT
+ tristate "Loongson1 SoC hardware watchdog"
+ depends on MACH_LOONGSON32
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the Loongson1 SoC Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index cba0043..bd3b00e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -162,6 +162,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
+obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
# PARISC Architecture
diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
new file mode 100644
index 0000000..fe96e2c
--- /dev/null
+++ b/drivers/watchdog/loongson1_wdt.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <loongson1.h>
+
+#define MIN_HEARTBEAT 1
+#define MAX_HEARTBEAT 30
+#define DEFAULT_HEARTBEAT 10
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+
+static unsigned int heartbeat = DEFAULT_HEARTBEAT;
+module_param(heartbeat, uint, 0);
+
+struct ls1x_wdt_drvdata {
+ struct watchdog_device wdt;
+ void __iomem *base;
+ unsigned int count;
+ struct clk *clk;
+};
+
+static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+ writel(0x1, drvdata->base + WDT_EN);
+ writel(drvdata->count, drvdata->base + WDT_TIMER);
+ writel(0x1, drvdata->base + WDT_SET);
+
+ return 0;
+}
+
+static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int new_timeout)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+ int counts_per_second;
+
+ if (watchdog_init_timeout(wdt_dev, new_timeout, NULL))
+ return -EINVAL;
+
+ counts_per_second = clk_get_rate(drvdata->clk);
+ drvdata->count = counts_per_second * wdt_dev->timeout;
+
+ ls1x_wdt_ping(wdt_dev);
+
+ return 0;
+}
+
+static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
+{
+ ls1x_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+
+ return 0;
+}
+
+static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+ writel(0x0, drvdata->base + WDT_EN);
+
+ return 0;
+}
+
+static const struct watchdog_info ls1x_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "Loongson1 Watchdog",
+};
+
+static const struct watchdog_ops ls1x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ls1x_wdt_start,
+ .stop = ls1x_wdt_stop,
+ .ping = ls1x_wdt_ping,
+ .set_timeout = ls1x_wdt_set_timeout,
+};
+
+static int ls1x_wdt_probe(struct platform_device *pdev)
+{
+ struct ls1x_wdt_drvdata *drvdata;
+ struct watchdog_device *ls1x_wdt;
+ struct resource *res;
+ int ret;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drvdata->base))
+ return PTR_ERR(drvdata->base);
+
+ drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(drvdata->clk)) {
+ dev_err(&pdev->dev, "failed to get %s clock\n", pdev->name);
+ return PTR_ERR(drvdata->clk);
+ }
+ clk_prepare_enable(drvdata->clk);
+
+ ls1x_wdt = &drvdata->wdt;
+ ls1x_wdt->info = &ls1x_wdt_info;
+ ls1x_wdt->ops = &ls1x_wdt_ops;
+ ls1x_wdt->timeout = heartbeat;
+ ls1x_wdt->min_timeout = MIN_HEARTBEAT;
+ ls1x_wdt->max_timeout = MAX_HEARTBEAT;
+ ls1x_wdt->parent = &pdev->dev;
+ watchdog_set_nowayout(ls1x_wdt, nowayout);
+ watchdog_set_drvdata(ls1x_wdt, drvdata);
+
+ ret = watchdog_register_device(&drvdata->wdt);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register watchdog device\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+}
+
+static int ls1x_wdt_remove(struct platform_device *pdev)
+{
+ struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
+
+ ls1x_wdt_stop(&drvdata->wdt);
+ watchdog_unregister_device(&drvdata->wdt);
+ clk_disable_unprepare(drvdata->clk);
+
+ return 0;
+}
+
+static struct platform_driver ls1x_wdt_driver = {
+ .probe = ls1x_wdt_probe,
+ .remove = ls1x_wdt_remove,
+ .driver = {
+ .name = "ls1x-wdt",
+ },
+};
+
+module_platform_driver(ls1x_wdt_driver);
+
+MODULE_AUTHOR("Yang Ling <gnaygnil@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
+MODULE_LICENSE("GPL");
--
1.9.1
reply other threads:[~2016-10-11 2:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161011025831.GA25649@ly-pc \
--to=gnaygnil@gmail.com \
--cc=keguang.zhang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.