[PATCH 4.8 24/37] x86/platform/intel-mid: Keep SRAM powered on at boot

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.8-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit f43ea76cf310c3be95cb75ae1350cbe76a8f2380 upstream.

On Penwell SRAM has to be powered on, otherwise it prevents booting.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ca22312dc840 ("x86/platform/intel-mid: Extend PWRMU to support Penwell")
Link: http://lkml.kernel.org/r/20160908103232.137587-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/platform/intel-mid/pwr.c |   45 ++++++++++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 9 deletions(-)

--- a/arch/x86/platform/intel-mid/pwr.c
+++ b/arch/x86/platform/intel-mid/pwr.c
@@ -354,7 +354,7 @@ static int mid_pwr_probe(struct pci_dev
 	return 0;
 }
 
-static int mid_set_initial_state(struct mid_pwr *pwr)
+static int mid_set_initial_state(struct mid_pwr *pwr, const u32 *states)
 {
 	unsigned int i, j;
 	int ret;
@@ -379,10 +379,10 @@ static int mid_set_initial_state(struct
 	 * NOTE: The actual device mapping is provided by a platform at run
 	 * time using vendor capability of PCI configuration space.
 	 */
-	mid_pwr_set_state(pwr, 0, 0xffffffff);
-	mid_pwr_set_state(pwr, 1, 0xffffffff);
-	mid_pwr_set_state(pwr, 2, 0xffffffff);
-	mid_pwr_set_state(pwr, 3, 0xffffffff);
+	mid_pwr_set_state(pwr, 0, states[0]);
+	mid_pwr_set_state(pwr, 1, states[1]);
+	mid_pwr_set_state(pwr, 2, states[2]);
+	mid_pwr_set_state(pwr, 3, states[3]);
 
 	/* Send command to SCU */
 	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
@@ -397,14 +397,41 @@ static int mid_set_initial_state(struct
 	return 0;
 }
 
-static const struct mid_pwr_device_info mid_info = {
-	.set_initial_state = mid_set_initial_state,
+static int pnw_set_initial_state(struct mid_pwr *pwr)
+{
+	/* On Penwell SRAM must stay powered on */
+	const u32 states[] = {
+		0xf00fffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static int tng_set_initial_state(struct mid_pwr *pwr)
+{
+	const u32 states[] = {
+		0xffffffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static const struct mid_pwr_device_info pnw_info = {
+	.set_initial_state = pnw_set_initial_state,
+};
+
+static const struct mid_pwr_device_info tng_info = {
+	.set_initial_state = tng_set_initial_state,
 };
 
 /* This table should be in sync with the one in drivers/pci/pci-mid.c */
 static const struct pci_device_id mid_pwr_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&mid_info },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&mid_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&pnw_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info },
 	{}
 };