All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yang Ling <gnaygnil@gmail.com>
To: Wim Van Sebroeck <wim@iguana.be>,
	Guenter Roeck <linux@roeck-us.net>,
	Keguang Zhang <keguang.zhang@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-mips@linux-mips.org, gnaygnil@gmail.com
Subject: [PATCH v2.1 1/2] watchdog: loongson1: Add Loongson1 SoC watchdog driver
Date: Fri, 21 Oct 2016 13:45:39 +0800	[thread overview]
Message-ID: <20161021054539.GA6237@ly-pc> (raw)

Add watchdog timer specific driver for Loongson1 SoC.

Signed-off-by: Yang Ling <gnaygnil@gmail.com>

---
V2.1 from Kelvin Cheung:
  Use max_hw_heartbeat_ms instead of max_timeout.
V2:
  Increase the value of the default heartbeat.
  Modify the setup process for register.
  Order include files and Makefile alphabetically.
V1.1:
  Add a little debugging information.
---
 drivers/watchdog/Kconfig         |   7 ++
 drivers/watchdog/Makefile        |   1 +
 drivers/watchdog/loongson1_wdt.c | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 166 insertions(+)
 create mode 100644 drivers/watchdog/loongson1_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 50dbaa8..6707d43 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1513,6 +1513,13 @@ config LANTIQ_WDT
 	help
 	  Hardware driver for the Lantiq SoC Watchdog Timer.
 
+config LOONGSON1_WDT
+	tristate "Loongson1 SoC hardware watchdog"
+	depends on MACH_LOONGSON32
+	select WATCHDOG_CORE
+	help
+	  Hardware driver for the Loongson1 SoC Watchdog Timer.
+
 config RALINK_WDT
 	tristate "Ralink SoC watchdog"
 	select WATCHDOG_CORE
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index cba0043..b6a8d70 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -157,6 +157,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
 obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
 obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
 obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
new file mode 100644
index 0000000..f885294
--- /dev/null
+++ b/drivers/watchdog/loongson1_wdt.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <loongson1.h>
+
+#define DEFAULT_HEARTBEAT	30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+
+static unsigned int heartbeat = DEFAULT_HEARTBEAT;
+module_param(heartbeat, uint, 0444);
+
+struct ls1x_wdt_drvdata {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned int counts_per_second;
+	struct watchdog_device wdt;
+};
+
+static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x1, drvdata->base + WDT_SET);
+
+	return 0;
+}
+
+static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				unsigned int timeout)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+	unsigned int counts;
+
+	wdt_dev->timeout = min(timeout, wdt_dev->max_hw_heartbeat_ms / 1000);
+	counts = drvdata->counts_per_second * wdt_dev->timeout;
+
+	writel(counts, drvdata->base + WDT_TIMER);
+
+	return 0;
+}
+
+static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x1, drvdata->base + WDT_EN);
+
+	return 0;
+}
+
+static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x0, drvdata->base + WDT_EN);
+
+	return 0;
+}
+
+static const struct watchdog_info ls1x_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Loongson1 Watchdog",
+};
+
+static const struct watchdog_ops ls1x_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = ls1x_wdt_start,
+	.stop = ls1x_wdt_stop,
+	.ping = ls1x_wdt_ping,
+	.set_timeout = ls1x_wdt_set_timeout,
+};
+
+static int ls1x_wdt_probe(struct platform_device *pdev)
+{
+	struct ls1x_wdt_drvdata *drvdata;
+	struct watchdog_device *ls1x_wdt;
+	struct resource *res;
+	int ret;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(drvdata->base))
+		return PTR_ERR(drvdata->base);
+
+	drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
+	if (IS_ERR(drvdata->clk)) {
+		dev_err(&pdev->dev, "failed to get %s clock\n", pdev->name);
+		return PTR_ERR(drvdata->clk);
+	}
+	clk_prepare_enable(drvdata->clk);
+
+	drvdata->counts_per_second = clk_get_rate(drvdata->clk);
+
+	ls1x_wdt = &drvdata->wdt;
+	ls1x_wdt->info = &ls1x_wdt_info;
+	ls1x_wdt->ops = &ls1x_wdt_ops;
+	ls1x_wdt->min_timeout = 1;
+	ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / drvdata->counts_per_second *
+					1000;
+	ls1x_wdt->parent = &pdev->dev;
+
+	watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
+	watchdog_set_nowayout(ls1x_wdt, nowayout);
+	watchdog_set_drvdata(ls1x_wdt, drvdata);
+
+	ret = watchdog_register_device(&drvdata->wdt);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
+
+	return 0;
+}
+
+static int ls1x_wdt_remove(struct platform_device *pdev)
+{
+	struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
+
+	ls1x_wdt_stop(&drvdata->wdt);
+	watchdog_unregister_device(&drvdata->wdt);
+	clk_disable_unprepare(drvdata->clk);
+
+	return 0;
+}
+
+static struct platform_driver ls1x_wdt_driver = {
+	.probe = ls1x_wdt_probe,
+	.remove = ls1x_wdt_remove,
+	.driver = {
+		.name = "ls1x-wdt",
+	},
+};
+
+module_platform_driver(ls1x_wdt_driver);
+
+MODULE_AUTHOR("Yang Ling <gnaygnil@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

             reply	other threads:[~2016-10-21  5:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-21  5:45 Yang Ling [this message]
2016-10-21 14:23 ` [PATCH v2.1 1/2] watchdog: loongson1: Add Loongson1 SoC watchdog driver Guenter Roeck
2016-10-24 15:37   ` Yang Ling
2016-11-24 16:05 ` [v2.1,1/2] " Guenter Roeck
2016-12-04 13:59   ` Yang Ling

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161021054539.GA6237@ly-pc \
    --to=gnaygnil@gmail.com \
    --cc=keguang.zhang@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.