From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Jarod Wilson <jarod@redhat.com>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux1394-devel@lists.sourceforge.net
Subject: Re: [PATCH net-next v2 7/9] net: use core MTU range checking in misc drivers
Date: Sat, 22 Oct 2016 21:27:59 +0200 [thread overview]
Message-ID: <20161022212759.228c7642@kant> (raw)
In-Reply-To: <20161022211606.3b5d137d@kant>
Adding Cc: linux1394-devel, dropping several Ccs, no additional comment.
On Oct 22 Stefan Richter wrote:
> On Oct 20 Jarod Wilson wrote:
> > firewire-net:
> > - set min/max_mtu
> > - remove fwnet_change_mtu
> [...]
> > --- a/drivers/firewire/net.c
> > +++ b/drivers/firewire/net.c
> > @@ -1349,15 +1349,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff
> > *skb, struct net_device *net) return NETDEV_TX_OK;
> > }
> >
> > -static int fwnet_change_mtu(struct net_device *net, int new_mtu)
> > -{
> > - if (new_mtu < 68)
> > - return -EINVAL;
> > -
> > - net->mtu = new_mtu;
> > - return 0;
> > -}
> > -
> > static const struct ethtool_ops fwnet_ethtool_ops = {
> > .get_link = ethtool_op_get_link,
> > };
> > @@ -1366,7 +1357,6 @@ static const struct net_device_ops
> > fwnet_netdev_ops = { .ndo_open = fwnet_open,
> > .ndo_stop = fwnet_stop,
> > .ndo_start_xmit = fwnet_tx,
> > - .ndo_change_mtu = fwnet_change_mtu,
> > };
> >
> > static void fwnet_init_dev(struct net_device *net)
> > @@ -1435,7 +1425,6 @@ static int fwnet_probe(struct fw_unit *unit,
> > struct net_device *net;
> > bool allocated_netdev = false;
> > struct fwnet_device *dev;
> > - unsigned max_mtu;
> > int ret;
> > union fwnet_hwaddr *ha;
> >
> > @@ -1478,9 +1467,10 @@ static int fwnet_probe(struct fw_unit *unit,
> > * Use the RFC 2734 default 1500 octets or the maximum payload
> > * as initial MTU
> > */
> > - max_mtu = (1 << (card->max_receive + 1))
> > - - sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE;
> > - net->mtu = min(1500U, max_mtu);
> > + net->max_mtu = (1 << (card->max_receive + 1))
> > + - sizeof(struct rfc2734_header) - IEEE1394_GASP_HDR_SIZE;
> > + net->mtu = min(1500U, net->max_mtu);
> > + net->min_mtu = ETH_MIN_MTU;
> >
> > /* Set our hardware address while we're at it */
> > ha = (union fwnet_hwaddr *)net->dev_addr;
>
> Please preserve the current behavior, i.e. do not enforce any particular
> upper bound. (Especially none based on the local link layer controller's
> max_receive parameter.)
>
> BTW, after having read RFC 2734, RFC 3146, and the code, I am convinced
> that net->mtu should be initialized to 1500, not less. But such a change
> should be done in a separate patch.
--
Stefan Richter
-======----- =-=- =-==-
http://arcgraph.de/sr/
next prev parent reply other threads:[~2016-10-22 19:28 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 2:33 [PATCH net-next 0/6] net: use core MTU range checking everywhere Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 1/6] net: use core MTU range checking in USB NIC drivers Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 2/6] net: use core MTU range checking in wireless drivers Jarod Wilson
2016-10-19 7:38 ` Johannes Berg
2016-10-19 14:27 ` Jarod Wilson
2016-10-19 14:28 ` Johannes Berg
2016-10-19 2:33 ` [PATCH net-next 3/6] net: use core MTU range checking in WAN drivers Jarod Wilson
2016-10-21 12:04 ` Krzysztof Hałasa
2016-10-19 2:33 ` [PATCH net-next 4/6] net: use core MTU range checking in core net infra Jarod Wilson
2016-10-19 12:17 ` Jiri Benc
2016-10-19 14:51 ` Jarod Wilson
2016-10-19 13:55 ` Sabrina Dubroca
2016-10-19 14:40 ` Jarod Wilson
2016-10-19 15:28 ` Sabrina Dubroca
2016-10-19 15:46 ` Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 5/6] net: use core MTU range checking in virt drivers Jarod Wilson
2016-10-19 13:06 ` Aaron Conole
2016-10-19 13:06 ` Aaron Conole
2016-10-19 13:59 ` Michael S. Tsirkin
2016-10-19 13:59 ` Michael S. Tsirkin
2016-10-19 14:03 ` Michael S. Tsirkin
2016-10-19 14:03 ` Michael S. Tsirkin
2016-10-19 14:17 ` Jarod Wilson
2016-10-19 14:17 ` Jarod Wilson
2016-10-19 14:15 ` Jarod Wilson
2016-10-19 14:15 ` Jarod Wilson
2016-10-19 14:07 ` Haiyang Zhang via Virtualization
2016-10-19 14:07 ` Haiyang Zhang
2016-10-19 14:23 ` Jarod Wilson
2016-10-19 14:23 ` Jarod Wilson
2016-10-19 22:21 ` Shrikrishna Khare
2016-10-19 22:21 ` Shrikrishna Khare
2016-10-19 2:33 ` Jarod Wilson
2016-10-19 2:33 ` [PATCH net-next 6/6] net: use core MTU range checking in misc drivers Jarod Wilson
2016-10-19 14:37 ` Robin Holt
2016-10-19 16:05 ` Sabrina Dubroca
2016-10-19 22:38 ` Stefan Richter
2016-10-20 3:16 ` Jarod Wilson
[not found] ` <20161020031641.GJ18569-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-22 9:36 ` Stefan Richter
2016-10-22 9:36 ` Stefan Richter
2016-10-22 18:51 ` Stefan Richter
2016-10-19 19:10 ` [PATCH net-next 0/6] net: use core MTU range checking everywhere David Miller
2016-10-19 19:29 ` Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 0/9] " Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 1/9] ethernet: use net core MTU range checking in more drivers Jarod Wilson
2016-10-20 17:55 ` Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 2/9] net: use core MTU range checking in USB NIC drivers Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 3/9] net: use core MTU range checking in wireless drivers Jarod Wilson
2016-10-20 18:22 ` Johannes Berg
2016-10-20 18:38 ` David Miller
2016-10-20 17:55 ` [PATCH net-next v2 4/9] net: use core MTU range checking in WAN drivers Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 5/9] net: use core MTU range checking in core net infra Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 6/9] net: use core MTU range checking in virt drivers Jarod Wilson
2016-10-20 17:55 ` Jarod Wilson
2016-10-20 18:05 ` Haiyang Zhang via Virtualization
2016-10-20 18:05 ` Haiyang Zhang
2016-10-20 20:12 ` Kershner, David A
2016-10-20 20:23 ` Michael S. Tsirkin
2016-10-21 2:37 ` Jarod Wilson
2016-10-21 2:37 ` Jarod Wilson
2016-10-21 3:36 ` Michael S. Tsirkin
2016-10-21 3:36 ` Michael S. Tsirkin
2016-10-21 13:24 ` Aaron Conole
2016-10-21 13:24 ` Aaron Conole
2016-10-20 20:23 ` Michael S. Tsirkin
2016-10-21 10:09 ` Wei Liu
2016-10-21 10:09 ` Wei Liu
2016-10-20 17:55 ` [PATCH net-next v2 7/9] net: use core MTU range checking in misc drivers Jarod Wilson
2016-10-21 6:52 ` Rémi Denis-Courmont
2016-10-21 16:22 ` Sebastian Reichel
[not found] ` <20161020175524.6184-8-jarod-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-10-22 7:17 ` [net-next,v2,7/9] " Sven Eckelmann
2016-10-22 7:17 ` Sven Eckelmann
2016-10-22 19:16 ` [PATCH net-next v2 7/9] " Stefan Richter
2016-10-22 19:27 ` Stefan Richter [this message]
2016-10-23 1:18 ` Jarod Wilson
2016-10-23 14:29 ` [PATCH net-next 1/2] firewire: net: fix maximum possible MTU Stefan Richter
2016-10-23 14:30 ` [PATCH net-next 2/2] firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some CardBus cards Stefan Richter
2016-10-23 14:30 ` Stefan Richter
2016-10-24 1:50 ` Jarod Wilson
2016-10-24 12:26 ` [PATCH net-next 2/2 v2] " Stefan Richter
2016-10-24 12:26 ` Stefan Richter
2016-10-25 3:05 ` Jarod Wilson
2016-10-26 21:29 ` [PATCH net-next 2/2] " David Miller
2016-10-26 21:29 ` David Miller
2016-10-29 20:16 ` [PATCH net-next] firewire: net: really fix maximum possible MTU Stefan Richter
2016-10-30 3:01 ` David Miller
2016-10-24 1:50 ` [PATCH net-next 1/2] firewire: net: " Jarod Wilson
2016-10-26 21:29 ` David Miller
2016-10-26 21:29 ` David Miller
2016-10-20 17:55 ` [PATCH net-next v2 8/9] s390/net: use net core MTU range checking Jarod Wilson
2016-10-20 17:55 ` [PATCH net-next v2 9/9] ipv4/6: use core net " Jarod Wilson
2016-10-20 18:53 ` [PATCH net-next v2 0/9] net: use core MTU range checking everywhere David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161022212759.228c7642@kant \
--to=stefanr@s5r6.in-berlin.de \
--cc=jarod@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.