diff for duplicates of <20161025063847.GD8574@dell> diff --git a/a/1.txt b/N1/1.txt index cb4eb30..a13b691 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,9 +1,9 @@ On Mon, 24 Oct 2016, John Syne wrote: -> > On Oct 24, 2016, at 11:01 PM, John Syne <john3909@gmail.com> wrote: -> >> On Oct 24, 2016, at 10:52 PM, Mugunthan V N <mugunthanvnm@ti.com> wrote: +> > On Oct 24, 2016, at 11:01 PM, John Syne <john3909-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: +> >> On Oct 24, 2016, at 10:52 PM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote: > >> > >> On Tuesday 25 October 2016 02:28 AM, John Syne wrote: -> >>>>> On Oct 23, 2016, at 11:02 PM, Mugunthan V N <mugunthanvnm@ti.com> wrote: +> >>>>> On Oct 23, 2016, at 11:02 PM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote: > >>>>> > >>>>> Increase ADC reference clock from 3MHz to 24MHz so that the > >>>>> sampling rates goes up from 100K samples per second to 800K @@ -14,7 +14,7 @@ On Mon, 24 Oct 2016, John Syne wrote: > >>>>> which results in the same amount touch events reported via > >>>>> evtest on AM335x GP EVM. > >>>>> -> >>>>> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> +> >>>>> Signed-off-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> > >>>>> --- > >>>>> > >>>>> This patch depends on ADC DMA patch series [1] diff --git a/a/content_digest b/N1/content_digest index 765026a..4768068 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -3,28 +3,29 @@ "ref\0086ab2fa-63ee-c5ab-2715-b2efd78270d7@ti.com\0" "ref\012725C92-9BB8-4F77-A7B4-F3C3DA9F8B0B@gmail.com\0" "ref\0DB09B26E-C5AB-427A-82D5-6FE857E7C218@gmail.com\0" - "From\0Lee Jones <lee.jones@linaro.org>\0" + "ref\0DB09B26E-C5AB-427A-82D5-6FE857E7C218-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>\0" "Subject\0Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz\0" "Date\0Tue, 25 Oct 2016 07:38:47 +0100\0" - "To\0John Syne <john3909@gmail.com>\0" - "Cc\0Mugunthan V N <mugunthanvnm@ti.com>" - linux-iio@vger.kernel.org - Tony Lindgren <tony@atomide.com> - Jonathan Cameron <jic23@kernel.org> - Vignesh R <vigneshr@ti.com> - linux-omap@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-kernel@vger.kernel.org - Sekhar Nori <nsekhar@ti.com> - " Peter Ujfalusi <peter.ujfalusi@ti.com>\0" + "To\0John Syne <john3909-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>" + linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> + Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> + Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org> + linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org> + " Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>\0" "\00:1\0" "b\0" "On Mon, 24 Oct 2016, John Syne wrote:\n" - "> > On Oct 24, 2016, at 11:01 PM, John Syne <john3909@gmail.com> wrote:\n" - "> >> On Oct 24, 2016, at 10:52 PM, Mugunthan V N <mugunthanvnm@ti.com> wrote:\n" + "> > On Oct 24, 2016, at 11:01 PM, John Syne <john3909-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:\n" + "> >> On Oct 24, 2016, at 10:52 PM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote:\n" "> >> \n" "> >> On Tuesday 25 October 2016 02:28 AM, John Syne wrote:\n" - "> >>>>> On Oct 23, 2016, at 11:02 PM, Mugunthan V N <mugunthanvnm@ti.com> wrote:\n" + "> >>>>> On Oct 23, 2016, at 11:02 PM, Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org> wrote:\n" "> >>>>> \n" "> >>>>> Increase ADC reference clock from 3MHz to 24MHz so that the\n" "> >>>>> sampling rates goes up from 100K samples per second to 800K\n" @@ -35,7 +36,7 @@ "> >>>>> which results in the same amount touch events reported via\n" "> >>>>> evtest on AM335x GP EVM.\n" "> >>>>> \n" - "> >>>>> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>\n" + "> >>>>> Signed-off-by: Mugunthan V N <mugunthanvnm-l0cyMroinI0@public.gmane.org>\n" "> >>>>> ---\n" "> >>>>> \n" "> >>>>> This patch depends on ADC DMA patch series [1]\n" @@ -92,4 +93,4 @@ "Linaro.org \342\224\202 Open source software for ARM SoCs\n" Follow Linaro: Facebook | Twitter | Blog -fa4c6de165997f3f2c62a59415fad5ba234d248c563531f0d1b8ce2d92d9eefe +b1ecc02d5d883a06f84ca0785df78f869d192aa34393c57d69ea6a3146133bcf
diff --git a/a/1.txt b/N2/1.txt index cb4eb30..1091fa9 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -45,7 +45,7 @@ On Mon, 24 Oct 2016, John Syne wrote: > >>>>> #define STEPDELAY_OPEN_MASK (0x3FFFF << 0) > >>>>> #define STEPDELAY_OPEN(val) ((val) << 0) > >>>>> -#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) -> >>> Wouldn’t this be better to add this to the devicetree? +> >>> Wouldn?t this be better to add this to the devicetree? > >>> > >>> ti,chan-step-avg = <0x16 0x16 0x16 0x16 0x16 0x16 0x16>; > >>> ti,chan-step-opendelay = <0x500 0x500 0x500 0x500 0x500 0x500 0x500>; @@ -53,7 +53,7 @@ On Mon, 24 Oct 2016, John Syne wrote: > >> > >> For a touch screen, there is not need to change in these parameter > >> settings, so my opinion is to keep it as is. Or am I missing something? -> > I was thinking that if you are using this driver as an ADC, you may want the flexibility to make these changes in the DT. I’m doing this by connecting sensors to the ADC inputs. I’m not using this driver for a touchscreen. +> > I was thinking that if you are using this driver as an ADC, you may want the flexibility to make these changes in the DT. I?m doing this by connecting sensors to the ADC inputs. I?m not using this driver for a touchscreen. > > Here is a DT overlay were this gets using on the BeagleBoneBlack. > @@ -68,5 +68,5 @@ DT should be used to describe the hardware. -- Lee Jones Linaro STMicroelectronics Landing Team Lead -Linaro.org │ Open source software for ARM SoCs +Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog diff --git a/a/content_digest b/N2/content_digest index 765026a..8dbb325 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -3,20 +3,10 @@ "ref\0086ab2fa-63ee-c5ab-2715-b2efd78270d7@ti.com\0" "ref\012725C92-9BB8-4F77-A7B4-F3C3DA9F8B0B@gmail.com\0" "ref\0DB09B26E-C5AB-427A-82D5-6FE857E7C218@gmail.com\0" - "From\0Lee Jones <lee.jones@linaro.org>\0" - "Subject\0Re: [PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz\0" + "From\0lee.jones@linaro.org (Lee Jones)\0" + "Subject\0[PATCH] drivers: mfd: ti_am335x_tscadc: increase ADC ref clock to 24MHz\0" "Date\0Tue, 25 Oct 2016 07:38:47 +0100\0" - "To\0John Syne <john3909@gmail.com>\0" - "Cc\0Mugunthan V N <mugunthanvnm@ti.com>" - linux-iio@vger.kernel.org - Tony Lindgren <tony@atomide.com> - Jonathan Cameron <jic23@kernel.org> - Vignesh R <vigneshr@ti.com> - linux-omap@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-kernel@vger.kernel.org - Sekhar Nori <nsekhar@ti.com> - " Peter Ujfalusi <peter.ujfalusi@ti.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On Mon, 24 Oct 2016, John Syne wrote:\n" @@ -66,7 +56,7 @@ "> >>>>> #define STEPDELAY_OPEN_MASK\t(0x3FFFF << 0)\n" "> >>>>> #define STEPDELAY_OPEN(val)\t((val) << 0)\n" "> >>>>> -#define STEPCONFIG_OPENDLY\tSTEPDELAY_OPEN(0x098)\n" - "> >>> Wouldn\342\200\231t this be better to add this to the devicetree?\n" + "> >>> Wouldn?t this be better to add this to the devicetree?\n" "> >>> \n" "> >>> \tti,chan-step-avg = <0x16 0x16 0x16 0x16 0x16 0x16 0x16>;\n" "> >>> \tti,chan-step-opendelay = <0x500 0x500 0x500 0x500 0x500 0x500 0x500>;\n" @@ -74,7 +64,7 @@ "> >> \n" "> >> For a touch screen, there is not need to change in these parameter\n" "> >> settings, so my opinion is to keep it as is. Or am I missing something?\n" - "> > I was thinking that if you are using this driver as an ADC, you may want the flexibility to make these changes in the DT. I\342\200\231m doing this by connecting sensors to the ADC inputs. I\342\200\231m not using this driver for a touchscreen. \n" + "> > I was thinking that if you are using this driver as an ADC, you may want the flexibility to make these changes in the DT. I?m doing this by connecting sensors to the ADC inputs. I?m not using this driver for a touchscreen. \n" "> \n" "> Here is a DT overlay were this gets using on the BeagleBoneBlack. \n" "> \n" @@ -89,7 +79,7 @@ "-- \n" "Lee Jones\n" "Linaro STMicroelectronics Landing Team Lead\n" - "Linaro.org \342\224\202 Open source software for ARM SoCs\n" + "Linaro.org ? Open source software for ARM SoCs\n" Follow Linaro: Facebook | Twitter | Blog -fa4c6de165997f3f2c62a59415fad5ba234d248c563531f0d1b8ce2d92d9eefe +8348d102ad791c593fbca3fba118f0ca8d74196b18d811f4a7b3e9f630942cbd
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.