From: Stefan Beller <sbeller@google.com>
To: gitster@pobox.com
Cc: bmwill@google.com, pclouds@gmail.com, git@vger.kernel.org,
Stefan Beller <sbeller@google.com>
Subject: [PATCHv2 32/36] pathspec: allow querying for attributes
Date: Fri, 28 Oct 2016 11:54:58 -0700 [thread overview]
Message-ID: <20161028185502.8789-33-sbeller@google.com> (raw)
In-Reply-To: <20161028185502.8789-1-sbeller@google.com>
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Documentation/glossary-content.txt | 20 +++++
dir.c | 35 ++++++++
pathspec.c | 105 +++++++++++++++++++++-
pathspec.h | 15 ++++
t/t6134-pathspec-with-labels.sh | 175 +++++++++++++++++++++++++++++++++++++
5 files changed, 346 insertions(+), 4 deletions(-)
create mode 100755 t/t6134-pathspec-with-labels.sh
diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt
index 8ad29e61a9..f90bd45395 100644
--- a/Documentation/glossary-content.txt
+++ b/Documentation/glossary-content.txt
@@ -384,6 +384,26 @@ full pathname may have special meaning:
+
Glob magic is incompatible with literal magic.
+attr;;
+After `attr:` comes a space separated list of "attribute
+requirements", all of which must be met in order for the
+path to be considered a match; this is in addition to the
+usual non-magic pathspec pattern matching.
++
+Each of the attribute requirements for the path takes one of
+these forms:
+
+- "`ATTR`" requires that the attribute `ATTR` must be set.
+
+- "`-ATTR`" requires that the attribute `ATTR` must be unset.
+
+- "`ATTR=VALUE`" requires that the attribute `ATTR` must be
+ set to the string `VALUE`.
+
+- "`!ATTR`" requires that the attribute `ATTR` must be
+ unspecified.
++
+
exclude;;
After a path matches any non-exclude pathspec, it will be run
through all exclude pathspec (magic signature: `!`). If it
diff --git a/dir.c b/dir.c
index bfa8c8a9a5..7d2c5c0925 100644
--- a/dir.c
+++ b/dir.c
@@ -9,6 +9,7 @@
*/
#include "cache.h"
#include "dir.h"
+#include "attr.h"
#include "refs.h"
#include "wildmatch.h"
#include "pathspec.h"
@@ -207,6 +208,37 @@ int within_depth(const char *name, int namelen,
return 1;
}
+static int match_attrs(const char *name, int namelen,
+ const struct pathspec_item *item)
+{
+ int i;
+ struct git_attr_result *res = git_attr_result_alloc(item->attr_check);
+
+ git_check_attr(name, item->attr_check, res);
+ for (i = 0; i < item->attr_match_nr; i++) {
+ const char *value;
+ int matched;
+ enum attr_match_mode match_mode;
+
+ value = res[i].value;
+ match_mode = item->attr_match[i].match_mode;
+
+ if (ATTR_TRUE(value))
+ matched = (match_mode == MATCH_SET);
+ else if (ATTR_FALSE(value))
+ matched = (match_mode == MATCH_UNSET);
+ else if (ATTR_UNSET(value))
+ matched = (match_mode == MATCH_UNSPECIFIED);
+ else
+ matched = (match_mode == MATCH_VALUE &&
+ !strcmp(item->attr_match[i].value, value));
+ if (!matched)
+ return 0;
+ }
+
+ return 1;
+}
+
#define DO_MATCH_EXCLUDE (1<<0)
#define DO_MATCH_DIRECTORY (1<<1)
#define DO_MATCH_SUBMODULE (1<<2)
@@ -263,6 +295,9 @@ static int match_pathspec_item(const struct pathspec_item *item, int prefix,
strncmp(item->match, name - prefix, item->prefix))
return 0;
+ if (item->attr_match_nr && !match_attrs(name, namelen, item))
+ return 0;
+
/* If the match was just the prefix, we matched */
if (!*match)
return MATCHED_RECURSIVELY;
diff --git a/pathspec.c b/pathspec.c
index 83b46c1910..478449eec5 100644
--- a/pathspec.c
+++ b/pathspec.c
@@ -1,6 +1,8 @@
#include "cache.h"
#include "dir.h"
#include "pathspec.h"
+#include "attr.h"
+#include "argv-array.h"
/*
* Finds which of the given pathspecs match items in the index.
@@ -88,12 +90,79 @@ static void prefix_short_magic(struct strbuf *sb, int prefixlen,
strbuf_addf(sb, ",prefix:%d)", prefixlen);
}
+static void parse_pathspec_attr_match(struct pathspec_item *item, const char *value)
+{
+ struct string_list_item *si;
+ struct string_list list = STRING_LIST_INIT_DUP;
+ struct argv_array attrs = ARGV_ARRAY_INIT;
+
+
+ if (!value || !strlen(value))
+ die(_("attr spec must not be empty"));
+
+ string_list_split(&list, value, ' ', -1);
+ string_list_remove_empty_items(&list, 0);
+
+ ALLOC_GROW(item->attr_match, item->attr_match_nr + list.nr, item->attr_match_alloc);
+
+ for_each_string_list_item(si, &list) {
+ size_t attr_len;
+
+ int j = item->attr_match_nr++;
+ const char *attr = si->string;
+ struct attr_match *am = &item->attr_match[j];
+
+ switch (*attr) {
+ case '!':
+ am->match_mode = MATCH_UNSPECIFIED;
+ attr++;
+ attr_len = strlen(attr);
+ break;
+ case '-':
+ am->match_mode = MATCH_UNSET;
+ attr++;
+ attr_len = strlen(attr);
+ break;
+ default:
+ attr_len = strcspn(attr, "=");
+ if (attr[attr_len] != '=')
+ am->match_mode = MATCH_SET;
+ else {
+ am->match_mode = MATCH_VALUE;
+ am->value = xstrdup(&attr[attr_len + 1]);
+ if (strchr(am->value, '\\'))
+ die(_("attr spec values must not contain backslashes"));
+ }
+ break;
+ }
+
+ if (!attr_name_valid(attr, attr_len)) {
+ struct strbuf sb = STRBUF_INIT;
+ am->match_mode = INVALID_ATTR;
+ invalid_attr_name_message(&sb, attr, attr_len);
+ die(_("invalid attribute in '%s': '%s'"), value, sb.buf);
+ }
+
+ argv_array_push(&attrs, xmemdupz(attr, attr_len));
+ }
+
+ if (!item->attr_check)
+ git_attr_check_initv(&item->attr_check, attrs.argv);
+ else
+ die(_("Only one 'attr:' specification is allowed."));
+
+ argv_array_clear(&attrs);
+ string_list_clear(&list, 0);
+ return;
+}
+
static void eat_long_magic(struct pathspec_item *item, const char *elt,
unsigned *magic, int *pathspec_prefix,
const char **copyfrom_, const char **long_magic_end)
{
int i;
const char *copyfrom = *copyfrom_;
+ const char *body;
/* longhand */
const char *nextat;
for (copyfrom = elt + 2;
@@ -108,15 +177,21 @@ static void eat_long_magic(struct pathspec_item *item, const char *elt,
if (!len)
continue;
- if (starts_with(copyfrom, "prefix:")) {
+ if (skip_prefix(copyfrom, "prefix:", &body)) {
char *endptr;
- *pathspec_prefix = strtol(copyfrom + 7,
- &endptr, 10);
+ *pathspec_prefix = strtol(body, &endptr, 10);
if (endptr - copyfrom != len)
die(_("invalid parameter for pathspec magic 'prefix'"));
continue;
}
+ if (skip_prefix(copyfrom, "attr:", &body)) {
+ char *attr_body = xmemdupz(body, len - strlen("attr:"));
+ parse_pathspec_attr_match(item, attr_body);
+ free(attr_body);
+ continue;
+ }
+
for (i = 0; i < ARRAY_SIZE(pathspec_magic); i++) {
if (strlen(pathspec_magic[i].name) == len &&
!strncmp(pathspec_magic[i].name, copyfrom, len)) {
@@ -432,7 +507,10 @@ void parse_pathspec(struct pathspec *pathspec,
for (i = 0; i < n; i++) {
unsigned short_magic;
entry = argv[i];
-
+ item[i].attr_check = NULL;
+ item[i].attr_match = NULL;
+ item[i].attr_match_nr = 0;
+ item[i].attr_match_alloc = 0;
item[i].magic = prefix_pathspec(item + i, &short_magic,
argv + i, flags,
prefix, prefixlen, entry);
@@ -454,6 +532,13 @@ void parse_pathspec(struct pathspec *pathspec,
if (item[i].nowildcard_len < item[i].len)
pathspec->has_wildcard = 1;
pathspec->magic |= item[i].magic;
+
+ if (item[i].attr_match_nr) {
+ int j;
+ for (j = 0; j < item[i].attr_match_nr; j++)
+ if (item[i].attr_match[j].match_mode == INVALID_ATTR)
+ die(_("attribute spec in the wrong syntax are prohibited."));
+ }
}
if (nr_exclude == n)
@@ -507,6 +592,18 @@ void copy_pathspec(struct pathspec *dst, const struct pathspec *src)
void clear_pathspec(struct pathspec *pathspec)
{
+ int i, j;
+ for (i = 0; i < pathspec->nr; i++) {
+ if (!pathspec->items[i].attr_match_nr)
+ continue;
+ for (j = 0; j < pathspec->items[j].attr_match_nr; j++)
+ free(pathspec->items[i].attr_match[j].value);
+ free(pathspec->items[i].attr_match);
+ if (pathspec->items[i].attr_check)
+ git_attr_check_clear(pathspec->items[i].attr_check);
+ free(pathspec->items[i].attr_check);
+ }
+
free(pathspec->items);
pathspec->items = NULL;
}
diff --git a/pathspec.h b/pathspec.h
index 59809e4793..ebef4bf503 100644
--- a/pathspec.h
+++ b/pathspec.h
@@ -32,6 +32,21 @@ struct pathspec {
int len, prefix;
int nowildcard_len;
int flags;
+ int attr_match_nr;
+ int attr_match_alloc;
+ struct attr_match {
+ char *value;
+ enum attr_match_mode {
+ MATCH_SET,
+ MATCH_UNSET,
+ MATCH_VALUE,
+ MATCH_UNSPECIFIED,
+ MATCH_NOT_UNSPECIFIED,
+ MATCH_SET_OR_VALUE,
+ INVALID_ATTR
+ } match_mode;
+ } *attr_match;
+ struct git_attr_check *attr_check;
} *items;
};
diff --git a/t/t6134-pathspec-with-labels.sh b/t/t6134-pathspec-with-labels.sh
new file mode 100755
index 0000000000..643e8ac35a
--- /dev/null
+++ b/t/t6134-pathspec-with-labels.sh
@@ -0,0 +1,175 @@
+#!/bin/sh
+
+test_description='test labels in pathspecs'
+. ./test-lib.sh
+
+test_expect_success 'setup a tree' '
+ cat <<-EOF >expect &&
+ fileA
+ fileAB
+ fileAC
+ fileB
+ fileBC
+ fileC
+ fileNoLabel
+ fileSetLabel
+ fileUnsetLabel
+ fileValue
+ fileWrongLabel
+ sub/fileA
+ sub/fileAB
+ sub/fileAC
+ sub/fileB
+ sub/fileBC
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileSetLabel
+ sub/fileUnsetLabel
+ sub/fileValue
+ sub/fileWrongLabel
+ EOF
+ mkdir sub &&
+ while read path
+ do
+ : >$path &&
+ git add $path || return 1
+ done <expect &&
+ git commit -m "initial commit" &&
+ git ls-files >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'pathspec with no attr' '
+ test_must_fail git ls-files ":(attr:)"
+'
+
+test_expect_success 'pathspec with labels and non existent .gitattributes' '
+ git ls-files ":(attr:label)" >actual &&
+ test_must_be_empty actual
+'
+
+test_expect_success 'setup .gitattributes' '
+ cat <<-EOF >.gitattributes &&
+ fileA labelA
+ fileB labelB
+ fileC labelC
+ fileAB labelA labelB
+ fileAC labelA labelC
+ fileBC labelB labelC
+ fileUnsetLabel -label
+ fileSetLabel label
+ fileValue label=foo
+ fileWrongLabel label☺
+ EOF
+ git add .gitattributes &&
+ git commit -m "add attributes"
+'
+
+test_expect_success 'check specific set attr' '
+ cat <<-EOF >expect &&
+ fileSetLabel
+ sub/fileSetLabel
+ EOF
+ git ls-files ":(attr:label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check specific unset attr' '
+ cat <<-EOF >expect &&
+ fileUnsetLabel
+ sub/fileUnsetLabel
+ EOF
+ git ls-files ":(attr:-label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check specific value attr' '
+ cat <<-EOF >expect &&
+ fileValue
+ sub/fileValue
+ EOF
+ git ls-files ":(attr:label=foo)" >actual &&
+ test_cmp expect actual &&
+ git ls-files ":(attr:label=bar)" >actual &&
+ test_must_be_empty actual
+'
+
+test_expect_success 'check unspecified attr' '
+ cat <<-EOF >expect &&
+ .gitattributes
+ fileA
+ fileAB
+ fileAC
+ fileB
+ fileBC
+ fileC
+ fileNoLabel
+ fileWrongLabel
+ sub/fileA
+ sub/fileAB
+ sub/fileAC
+ sub/fileB
+ sub/fileBC
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileWrongLabel
+ EOF
+ git ls-files ":(attr:!label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check multiple unspecified attr' '
+ cat <<-EOF >expect &&
+ .gitattributes
+ fileC
+ fileNoLabel
+ fileWrongLabel
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileWrongLabel
+ EOF
+ git ls-files ":(attr:!labelB !labelA !label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check label with more labels but excluded path' '
+ cat <<-EOF >expect &&
+ fileAB
+ fileB
+ fileBC
+ EOF
+ git ls-files ":(attr:labelB)" ":(exclude)sub/" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check label excluding other labels' '
+ cat <<-EOF >expect &&
+ fileAB
+ fileB
+ fileBC
+ sub/fileAB
+ sub/fileB
+ EOF
+ git ls-files ":(attr:labelB)" ":(exclude,attr:labelC)sub/" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'fail on multiple attr specifiers in one pathspec item' '
+ test_must_fail git ls-files . ":(attr:labelB,attr:labelC)" 2>actual &&
+ test_i18ngrep "Only one" actual
+'
+
+test_expect_success 'checking attributes in a multithreaded process' '
+ git status ":(attr:labelB)"
+'
+
+test_expect_success 'abort on giving invalid label on the command line' '
+ test_must_fail git ls-files . ":(attr:☺)"
+'
+
+test_expect_success 'abort on asking for wrong magic' '
+ test_must_fail git ls-files . ":(attr:-label=foo)" &&
+ test_must_fail git ls-files . ":(attr:!label=foo)"
+'
+
+test_done
--
2.10.1.714.ge3da0db
next prev parent reply other threads:[~2016-10-28 18:56 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-28 18:54 [PATCHv2 00/36] Revamp the attr subsystem! Stefan Beller
2016-10-28 18:54 ` [PATCHv2 01/36] commit.c: use strchrnul() to scan for one line Stefan Beller
2016-10-28 18:54 ` [PATCHv2 02/36] attr.c: " Stefan Beller
2016-10-28 18:54 ` [PATCHv2 03/36] attr.c: update a stale comment on "struct match_attr" Stefan Beller
2016-10-28 18:54 ` [PATCHv2 04/36] attr.c: explain the lack of attr-name syntax check in parse_attr() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 05/36] attr.c: complete a sentence in a comment Stefan Beller
2016-10-28 18:54 ` [PATCHv2 06/36] attr.c: mark where #if DEBUG ends more clearly Stefan Beller
2016-10-28 18:54 ` [PATCHv2 07/36] attr.c: simplify macroexpand_one() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 08/36] attr.c: tighten constness around "git_attr" structure Stefan Beller
2016-10-28 18:54 ` [PATCHv2 09/36] attr.c: plug small leak in parse_attr_line() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 10/36] attr: rename function and struct related to checking attributes Stefan Beller
2016-10-28 18:54 ` [PATCHv2 11/36] attr: (re)introduce git_check_attr() and struct git_attr_check Stefan Beller
2016-10-28 18:54 ` [PATCHv2 12/36] attr: convert git_all_attrs() to use "struct git_attr_check" Stefan Beller
2016-10-28 18:54 ` [PATCHv2 13/36] attr: convert git_check_attrs() callers to use the new API Stefan Beller
2016-10-28 18:54 ` [PATCHv2 14/36] attr: retire git_check_attrs() API Stefan Beller
2016-10-28 18:54 ` [PATCHv2 15/36] attr: add counted string version of git_check_attr() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 16/36] attr: add counted string version of git_attr() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 17/36] attr: expose validity check for attribute names Stefan Beller
2016-10-28 18:54 ` [PATCHv2 18/36] attr: support quoting pathname patterns in C style Stefan Beller
2016-10-28 18:54 ` [PATCHv2 19/36] attr.c: add push_stack() helper Stefan Beller
2016-10-28 18:54 ` [PATCHv2 20/36] attr.c: pass struct git_attr_check down the callchain Stefan Beller
2016-10-28 18:54 ` [PATCHv2 21/36] attr.c: rename a local variable check Stefan Beller
2016-10-28 18:54 ` [PATCHv2 22/36] attr.c: correct ugly hack for git_all_attrs() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 23/36] attr.c: introduce empty_attr_check_elems() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 24/36] attr.c: always pass check[] to collect_some_attrs() Stefan Beller
2016-10-28 18:54 ` [PATCHv2 25/36] attr.c: outline the future plans by heavily commenting Stefan Beller
2016-10-28 18:54 ` [PATCHv2 26/36] attr: make git_check_attr_counted static Stefan Beller
2016-10-28 18:54 ` [PATCHv2 27/36] attr: convert to new threadsafe API Stefan Beller
2016-10-28 22:06 ` Junio C Hamano
2016-10-28 22:08 ` Stefan Beller
2016-10-28 22:25 ` Junio C Hamano
2016-10-29 7:10 ` Johannes Sixt
2016-10-28 18:54 ` [PATCHv2 28/36] attr: keep attr stack for each check Stefan Beller
2016-10-28 21:35 ` Junio C Hamano
2016-10-28 18:54 ` [PATCHv2 29/36] Documentation: fix a typo Stefan Beller
2016-10-28 18:54 ` [PATCHv2 30/36] pathspec: move long magic parsing out of prefix_pathspec Stefan Beller
2016-10-28 18:54 ` [PATCHv2 31/36] pathspec: move prefix check out of the inner loop Stefan Beller
2016-10-28 18:54 ` Stefan Beller [this message]
2016-11-09 9:57 ` [PATCHv2 32/36] pathspec: allow querying for attributes Duy Nguyen
2016-11-09 22:42 ` Stefan Beller
2016-10-28 18:54 ` [PATCHv2 33/36] pathspec: allow escaped query values Stefan Beller
2016-10-28 18:55 ` [PATCHv2 34/36] submodule update: add `--init-default-path` switch Stefan Beller
2016-11-03 17:46 ` [PATCH] SQUASH to: " Stefan Beller
2016-10-28 18:55 ` [PATCHv2 35/36] clone: add --init-submodule=<pathspec> switch Stefan Beller
2016-10-28 18:55 ` [PATCHv2 36/36] completion: clone can initialize specific submodules Stefan Beller
2016-10-28 21:43 ` [PATCHv2 00/36] Revamp the attr subsystem! Junio C Hamano
2016-10-28 22:02 ` Stefan Beller
2016-10-28 23:59 ` Ramsay Jones
2016-11-03 20:47 ` Johannes Sixt
2016-11-03 20:53 ` Stefan Beller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161028185502.8789-33-sbeller@google.com \
--to=sbeller@google.com \
--cc=bmwill@google.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=pclouds@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.