From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Petazzoni Date: Fri, 4 Nov 2016 14:59:37 +0100 Subject: [Buildroot] Support for MPC_8323E-RDB Board In-Reply-To: References: Message-ID: <20161104145937.174c3cb6@free-electrons.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello, On Fri, 4 Nov 2016 18:03:38 +0530, Siva Prakash Reddy Nareddy wrote: > The issues I am getting are as follows.. > > jyothi at jyothi:/home/buildroot-labs/buildroot$ sudo make menuconfig Don't run Buildroot as root. > configuration written to /home/buildroot-labs/buildroot/.config > > *** End of the configuration. > *** Execute 'make' to start the build or try 'make help'. > > jyothi at jyothi:/home/buildroot-labs/buildroot$ sudo make > boot/uboot/uboot.mk:295: *** No board defconfig name specified, check your > BR2_TARGET_UBOOT_DEFCONFIG setting. Stop. This means you have enabled the U-Boot bootloader, but you have not defined which U-Boot configuration to build, so Buildroot cannot start the build process. > jyothi at jyothi:/home/buildroot-labs/buildroot$ sudo make > linux/linux.mk:441: *** No kernel device tree source specified, check your > BR2_LINUX_KERNEL_USE_INTREE_DTS / BR2_LINUX_KERNEL_USE_CUSTOM_DTS > settings. Stop. This means you have enabled the Linux kernel, with Device Tree support, but you haven't specified which Device Tree files you want to build. Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com