From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH V3 3/3] drm: Add new driver for MXSFB controller
Date: Mon, 14 Nov 2016 11:10:36 +0100 [thread overview]
Message-ID: <20161114101036.3505-3-marex@denx.de> (raw)
In-Reply-To: <20161114101036.3505-1-marex@denx.de>
Add new driver for the MXSFB controller found in i.MX23/28/6SX .
The MXSFB controller is a simple framebuffer controller with one
parallel LCD output. Unlike the MXSFB fbdev driver that is used
on these systems now, this driver uses the DRM/KMS framework.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
--
V2: - Use drm_simple_kms_helper to reduce amount of common code
- Add dedicated OF compatible for i.MX6SX
V3: - Update to latest next/master
---
MAINTAINERS | 6 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/mxsfb/Kconfig | 18 ++
drivers/gpu/drm/mxsfb/Makefile | 2 +
drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 241 ++++++++++++++++++++
drivers/gpu/drm/mxsfb/mxsfb_drv.c | 444 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/mxsfb/mxsfb_drv.h | 54 +++++
drivers/gpu/drm/mxsfb/mxsfb_out.c | 131 +++++++++++
drivers/gpu/drm/mxsfb/mxsfb_regs.h | 114 ++++++++++
10 files changed, 1013 insertions(+)
create mode 100644 drivers/gpu/drm/mxsfb/Kconfig
create mode 100644 drivers/gpu/drm/mxsfb/Makefile
create mode 100644 drivers/gpu/drm/mxsfb/mxsfb_crtc.c
create mode 100644 drivers/gpu/drm/mxsfb/mxsfb_drv.c
create mode 100644 drivers/gpu/drm/mxsfb/mxsfb_drv.h
create mode 100644 drivers/gpu/drm/mxsfb/mxsfb_out.c
create mode 100644 drivers/gpu/drm/mxsfb/mxsfb_regs.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f3f60b..f32b5df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8339,6 +8339,12 @@ T: git git://linuxtv.org/mkrufky/tuners.git
S: Maintained
F: drivers/media/tuners/mxl5007t.*
+MXSFB DRM DRIVER
+M: Marek Vasut <marex@denx.de>
+S: Supported
+F: drivers/gpu/drm/mxsfb/
+F: Documentation/devicetree/bindings/display/mxsfb-drm.txt
+
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
M: Hyong-Youb Kim <hykim@myri.com>
L: netdev@vger.kernel.org
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 863cdca..fbcb984 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -239,6 +239,8 @@ source "drivers/gpu/drm/mediatek/Kconfig"
source "drivers/gpu/drm/zte/Kconfig"
+source "drivers/gpu/drm/mxsfb/Kconfig"
+
# Keep legacy drivers last
menuconfig DRM_LEGACY
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index f217274..ac5e115 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
obj-$(CONFIG_DRM_ARCPGU)+= arc/
obj-y += hisilicon/
obj-$(CONFIG_DRM_ZTE) += zte/
+obj-$(CONFIG_DRM_MXSFB) += mxsfb/
diff --git a/drivers/gpu/drm/mxsfb/Kconfig b/drivers/gpu/drm/mxsfb/Kconfig
new file mode 100644
index 0000000..0b6cb59
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/Kconfig
@@ -0,0 +1,18 @@
+config DRM_MXS
+ bool
+ help
+ Choose this option to select drivers for MXS FB devices
+
+config DRM_MXSFB
+ tristate "i.MX23/i.MX28/i.MX6SX MXSFB LCD controller"
+ depends on DRM && OF
+ depends on COMMON_CLK
+ select DRM_MXS
+ select DRM_KMS_HELPER
+ select DRM_KMS_FB_HELPER
+ select DRM_KMS_CMA_HELPER
+ help
+ Choose this option if you have an i.MX23/i.MX28/i.MX6SX MXSFB
+ LCD controller.
+
+ If M is selected the module will be called mxsfb.
diff --git a/drivers/gpu/drm/mxsfb/Makefile b/drivers/gpu/drm/mxsfb/Makefile
new file mode 100644
index 0000000..857f3a4
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/Makefile
@@ -0,0 +1,2 @@
+mxsfb-y := mxsfb_drv.o mxsfb_crtc.o mxsfb_out.o
+obj-$(CONFIG_DRM_MXSFB) += mxsfb.o
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
new file mode 100644
index 0000000..0818903
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * This code is based on drivers/video/fbdev/mxsfb.c :
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/of_graph.h>
+#include <linux/platform_data/simplefb.h>
+#include <video/videomode.h>
+
+#include "mxsfb_drv.h"
+#include "mxsfb_regs.h"
+
+static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val)
+{
+ return (val & mxsfb->devdata->hs_wdth_mask) <<
+ mxsfb->devdata->hs_wdth_shift;
+}
+
+/* Setup the MXSFB registers for decoding the pixels out of the framebuffer */
+static int mxsfb_set_pixel_fmt(struct mxsfb_drm_private *mxsfb)
+{
+ struct drm_crtc *crtc = &mxsfb->pipe.crtc;
+ struct drm_device *drm = crtc->dev;
+ const u32 format = crtc->primary->state->fb->pixel_format;
+ u32 ctrl, ctrl1;
+
+ ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER;
+
+ /*
+ * WARNING: The bus width, CTRL_SET_BUS_WIDTH(), is configured to
+ * match the selected mode here. This differs from the original
+ * MXSFB driver, which had the option to configure the bus width
+ * to arbitrary value. This limitation should not pose an issue.
+ */
+
+ /* CTRL1 contains IRQ config and status bits, preserve those. */
+ ctrl1 = readl(mxsfb->base + LCDC_CTRL1);
+ ctrl1 &= CTRL1_CUR_FRAME_DONE_IRQ_EN | CTRL1_CUR_FRAME_DONE_IRQ;
+
+ switch (format) {
+ case DRM_FORMAT_RGB565:
+ dev_dbg(drm->dev, "Setting up RGB565 mode\n");
+ ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_16BIT);
+ ctrl |= CTRL_SET_WORD_LENGTH(0);
+ ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0xf);
+ break;
+ case DRM_FORMAT_XRGB8888:
+ dev_dbg(drm->dev, "Setting up XRGB8888 mode\n");
+ ctrl |= CTRL_SET_BUS_WIDTH(STMLCDIF_24BIT);
+ ctrl |= CTRL_SET_WORD_LENGTH(3);
+ /* Do not use packed pixels = one pixel per word instead. */
+ ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0x7);
+ break;
+ default:
+ dev_err(drm->dev, "Unhandled pixel format %08x\n", format);
+ return -EINVAL;
+ }
+
+ writel(ctrl1, mxsfb->base + LCDC_CTRL1);
+ writel(ctrl, mxsfb->base + LCDC_CTRL);
+
+ return 0;
+}
+
+static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
+{
+ u32 reg;
+
+ if (mxsfb->clk_disp_axi)
+ clk_prepare_enable(mxsfb->clk_disp_axi);
+ clk_prepare_enable(mxsfb->clk);
+ mxsfb_enable_axi_clk(mxsfb);
+
+ /* If it was disabled, re-enable the mode again */
+ writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
+
+ /* Enable the SYNC signals first, then the DMA engine */
+ reg = readl(mxsfb->base + LCDC_VDCTRL4);
+ reg |= VDCTRL4_SYNC_SIGNALS_ON;
+ writel(reg, mxsfb->base + LCDC_VDCTRL4);
+
+ writel(CTRL_RUN, mxsfb->base + LCDC_CTRL + REG_SET);
+}
+
+static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb)
+{
+ u32 reg;
+
+ /*
+ * Even if we disable the controller here, it will still continue
+ * until its FIFOs are running out of data
+ */
+ writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_CLR);
+
+ readl_poll_timeout(mxsfb->base + LCDC_CTRL, reg, !(reg & CTRL_RUN),
+ 0, 1000);
+
+ reg = readl(mxsfb->base + LCDC_VDCTRL4);
+ reg &= ~VDCTRL4_SYNC_SIGNALS_ON;
+ writel(reg, mxsfb->base + LCDC_VDCTRL4);
+
+ mxsfb_disable_axi_clk(mxsfb);
+
+ clk_disable_unprepare(mxsfb->clk);
+ if (mxsfb->clk_disp_axi)
+ clk_disable_unprepare(mxsfb->clk_disp_axi);
+}
+
+static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
+{
+ struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
+ const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
+ u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
+ int err;
+
+ /*
+ * It seems, you can't re-program the controller if it is still
+ * running. This may lead to shifted pictures (FIFO issue?), so
+ * first stop the controller and drain its FIFOs.
+ */
+ mxsfb_enable_axi_clk(mxsfb);
+
+ /* Clear the FIFOs */
+ writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
+
+ err = mxsfb_set_pixel_fmt(mxsfb);
+ if (err)
+ return;
+
+ clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
+
+ writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
+ TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
+ mxsfb->base + mxsfb->devdata->transfer_count);
+
+ vsync_pulse_len = m->crtc_vsync_end - m->crtc_vsync_start;
+
+ vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* Always in DOTCLOCK mode */
+ VDCTRL0_VSYNC_PERIOD_UNIT |
+ VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
+ VDCTRL0_SET_VSYNC_PULSE_WIDTH(vsync_pulse_len);
+ if (m->flags & DRM_MODE_FLAG_PHSYNC)
+ vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
+ if (m->flags & DRM_MODE_FLAG_PVSYNC)
+ vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
+ if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
+ vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
+
+ writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
+
+ /* Frame length in lines. */
+ writel(m->crtc_vtotal, mxsfb->base + LCDC_VDCTRL1);
+
+ /* Line length in units of clocks or pixels. */
+ hsync_pulse_len = m->crtc_hsync_end - m->crtc_hsync_start;
+ writel(set_hsync_pulse_width(mxsfb, hsync_pulse_len) |
+ VDCTRL2_SET_HSYNC_PERIOD(m->crtc_htotal),
+ mxsfb->base + LCDC_VDCTRL2);
+
+ writel(SET_HOR_WAIT_CNT(m->crtc_hblank_end - m->crtc_hsync_end) |
+ SET_VERT_WAIT_CNT(m->crtc_vblank_end - m->crtc_vsync_end),
+ mxsfb->base + LCDC_VDCTRL3);
+
+ writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
+ mxsfb->base + LCDC_VDCTRL4);
+
+ mxsfb_disable_axi_clk(mxsfb);
+}
+
+void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
+{
+ mxsfb_crtc_mode_set_nofb(mxsfb);
+ mxsfb_enable_controller(mxsfb);
+}
+
+void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
+{
+ mxsfb_disable_controller(mxsfb);
+}
+
+void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
+ struct drm_plane_state *state)
+{
+ struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
+ struct drm_crtc *crtc = &pipe->crtc;
+ struct drm_framebuffer *fb = pipe->plane.state->fb;
+ struct drm_pending_vblank_event *event;
+ struct drm_gem_cma_object *gem;
+
+ if (!crtc)
+ return;
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ event = crtc->state->event;
+ if (event) {
+ crtc->state->event = NULL;
+
+ if (drm_crtc_vblank_get(crtc) == 0) {
+ drm_crtc_arm_vblank_event(crtc, event);
+ } else {
+ drm_crtc_send_vblank_event(crtc, event);
+ }
+ }
+ spin_unlock_irq(&crtc->dev->event_lock);
+
+ if (!fb)
+ return;
+
+ gem = drm_fb_cma_get_gem_obj(fb, 0);
+
+ mxsfb_enable_axi_clk(mxsfb);
+ writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
+ mxsfb_disable_axi_clk(mxsfb);
+}
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
new file mode 100644
index 0000000..79a18bf
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * This code is based on drivers/video/fbdev/mxsfb.c :
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/list.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/pm_runtime.h>
+#include <linux/reservation.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "mxsfb_drv.h"
+#include "mxsfb_regs.h"
+
+enum mxsfb_devtype {
+ MXSFB_V3,
+ MXSFB_V4,
+};
+
+static const struct mxsfb_devdata mxsfb_devdata[] = {
+ [MXSFB_V3] = {
+ .transfer_count = LCDC_V3_TRANSFER_COUNT,
+ .cur_buf = LCDC_V3_CUR_BUF,
+ .next_buf = LCDC_V3_NEXT_BUF,
+ .debug0 = LCDC_V3_DEBUG0,
+ .hs_wdth_mask = 0xff,
+ .hs_wdth_shift = 24,
+ .ipversion = 3,
+ },
+ [MXSFB_V4] = {
+ .transfer_count = LCDC_V4_TRANSFER_COUNT,
+ .cur_buf = LCDC_V4_CUR_BUF,
+ .next_buf = LCDC_V4_NEXT_BUF,
+ .debug0 = LCDC_V4_DEBUG0,
+ .hs_wdth_mask = 0x3fff,
+ .hs_wdth_shift = 18,
+ .ipversion = 4,
+ },
+};
+
+static const uint32_t mxsfb_formats[] = {
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_RGB565
+};
+
+static struct mxsfb_drm_private *
+drm_pipe_to_mxsfb_drm_private(struct drm_simple_display_pipe *pipe)
+{
+ return container_of(pipe, struct mxsfb_drm_private, pipe);
+}
+
+void mxsfb_enable_axi_clk(struct mxsfb_drm_private *mxsfb)
+{
+ if (mxsfb->clk_axi)
+ clk_prepare_enable(mxsfb->clk_axi);
+}
+
+void mxsfb_disable_axi_clk(struct mxsfb_drm_private *mxsfb)
+{
+ if (mxsfb->clk_axi)
+ clk_disable_unprepare(mxsfb->clk_axi);
+}
+
+static const struct drm_mode_config_funcs mxsfb_mode_config_funcs = {
+ .fb_create = drm_fb_cma_create,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state)
+{
+ struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+
+ mxsfb_crtc_enable(mxsfb);
+}
+
+static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+ struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+
+ mxsfb_crtc_disable(mxsfb);
+}
+
+static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *plane_state)
+{
+ struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+
+ mxsfb_plane_atomic_update(mxsfb, plane_state);
+}
+
+static int mxsfb_pipe_prepare_fb(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *plane_state)
+{
+ return drm_fb_cma_prepare_fb(&pipe->plane, plane_state);
+}
+
+struct drm_simple_display_pipe_funcs mxsfb_funcs = {
+ .enable = mxsfb_pipe_enable,
+ .disable = mxsfb_pipe_disable,
+ .update = mxsfb_pipe_update,
+ .prepare_fb = mxsfb_pipe_prepare_fb,
+};
+
+static int mxsfb_load(struct drm_device *drm, unsigned long flags)
+{
+ struct platform_device *pdev = to_platform_device(drm->dev);
+ struct mxsfb_drm_private *mxsfb;
+ struct resource *res;
+ int ret;
+
+ mxsfb = devm_kzalloc(&pdev->dev, sizeof(*mxsfb), GFP_KERNEL);
+ if (!mxsfb)
+ return -ENOMEM;
+
+ drm->dev_private = mxsfb;
+ mxsfb->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mxsfb->base = devm_ioremap_resource(drm->dev, res);
+ if (IS_ERR(mxsfb->base))
+ return PTR_ERR(mxsfb->base);
+
+ mxsfb->clk = devm_clk_get(drm->dev, NULL);
+ if (IS_ERR(mxsfb->clk))
+ return PTR_ERR(mxsfb->clk);
+
+ mxsfb->clk_axi = devm_clk_get(drm->dev, "axi");
+ if (IS_ERR(mxsfb->clk_axi))
+ mxsfb->clk_axi = NULL;
+
+ mxsfb->clk_disp_axi = devm_clk_get(drm->dev, "disp_axi");
+ if (IS_ERR(mxsfb->clk_disp_axi))
+ mxsfb->clk_disp_axi = NULL;
+
+ ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(drm->dev);
+
+ ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+ if (ret < 0) {
+ dev_err(drm->dev, "Failed to initialise vblank\n");
+ goto err_vblank;
+ }
+
+ /* Modeset init */
+ drm_mode_config_init(drm);
+
+ ret = mxsfb_create_output(drm);
+ if (ret < 0) {
+ dev_err(drm->dev, "Failed to create outputs\n");
+ goto err_vblank;
+ }
+
+ ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
+ mxsfb_formats, ARRAY_SIZE(mxsfb_formats),
+ &mxsfb->connector);
+ if (ret < 0) {
+ dev_err(drm->dev, "Cannot setup simple display pipe\n");
+ goto err_vblank;
+ }
+
+ ret = drm_panel_attach(mxsfb->panel, &mxsfb->connector);
+ if (ret) {
+ dev_err(drm->dev, "Cannot connect panel\n");
+ goto err_vblank;
+ }
+
+ drm->mode_config.min_width = MXSFB_MIN_XRES;
+ drm->mode_config.min_height = MXSFB_MIN_YRES;
+ drm->mode_config.max_width = MXSFB_MAX_XRES;
+ drm->mode_config.max_height = MXSFB_MAX_YRES;
+ drm->mode_config.funcs = &mxsfb_mode_config_funcs;
+
+ drm_mode_config_reset(drm);
+
+ pm_runtime_get_sync(drm->dev);
+ ret = drm_irq_install(drm, platform_get_irq(pdev, 0));
+ pm_runtime_put_sync(drm->dev);
+
+ if (ret < 0) {
+ dev_err(drm->dev, "Failed to install IRQ handler\n");
+ goto err_irq;
+ }
+
+ drm_kms_helper_poll_init(drm);
+
+ mxsfb->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
+ drm->mode_config.num_connector);
+ if (IS_ERR(mxsfb->fbdev)) {
+ mxsfb->fbdev = NULL;
+ dev_err(drm->dev, "Failed to init FB CMA area\n");
+ goto err_cma;
+ }
+
+ platform_set_drvdata(pdev, drm);
+
+ drm_helper_hpd_irq_event(drm);
+
+ return 0;
+
+err_cma:
+ drm_irq_uninstall(drm);
+err_irq:
+ drm_panel_detach(mxsfb->panel);
+err_vblank:
+ pm_runtime_disable(drm->dev);
+
+ return ret;
+}
+
+static void mxsfb_unload(struct drm_device *drm)
+{
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+
+ if (mxsfb->fbdev)
+ drm_fbdev_cma_fini(mxsfb->fbdev);
+
+ drm_kms_helper_poll_fini(drm);
+ drm_mode_config_cleanup(drm);
+ drm_vblank_cleanup(drm);
+
+ pm_runtime_get_sync(drm->dev);
+ drm_irq_uninstall(drm);
+ pm_runtime_put_sync(drm->dev);
+
+ drm->dev_private = NULL;
+
+ pm_runtime_disable(drm->dev);
+}
+
+static void mxsfb_lastclose(struct drm_device *drm)
+{
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+
+ drm_fbdev_cma_restore_mode(mxsfb->fbdev);
+}
+
+static int mxsfb_enable_vblank(struct drm_device *drm, unsigned int crtc)
+{
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+
+ /* Clear and enable VBLANK IRQ */
+ mxsfb_enable_axi_clk(mxsfb);
+ writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+ writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_SET);
+ mxsfb_disable_axi_clk(mxsfb);
+
+ return 0;
+}
+
+static void mxsfb_disable_vblank(struct drm_device *drm, unsigned int crtc)
+{
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+
+ /* Disable and clear VBLANK IRQ */
+ mxsfb_enable_axi_clk(mxsfb);
+ writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+ writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+ mxsfb_disable_axi_clk(mxsfb);
+}
+
+static void mxsfb_irq_preinstall(struct drm_device *drm)
+{
+ mxsfb_disable_vblank(drm, 0);
+}
+
+static irqreturn_t mxsfb_irq_handler(int irq, void *data)
+{
+ struct drm_device *drm = data;
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+ u32 reg;
+
+ mxsfb_enable_axi_clk(mxsfb);
+
+ reg = readl(mxsfb->base + LCDC_CTRL1);
+
+ if (reg & CTRL1_CUR_FRAME_DONE_IRQ)
+ drm_crtc_handle_vblank(&mxsfb->pipe.crtc);
+
+ writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+
+ mxsfb_disable_axi_clk(mxsfb);
+
+ return IRQ_HANDLED;
+}
+
+static const struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .poll = drm_poll,
+ .read = drm_read,
+ .llseek = noop_llseek,
+ .mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver mxsfb_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET |
+ DRIVER_PRIME | DRIVER_ATOMIC |
+ DRIVER_HAVE_IRQ,
+ .lastclose = mxsfb_lastclose,
+ .irq_handler = mxsfb_irq_handler,
+ .irq_preinstall = mxsfb_irq_preinstall,
+ .irq_uninstall = mxsfb_irq_preinstall,
+ .get_vblank_counter = drm_vblank_no_hw_counter,
+ .enable_vblank = mxsfb_enable_vblank,
+ .disable_vblank = mxsfb_disable_vblank,
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+ .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_vmap = drm_gem_cma_prime_vmap,
+ .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+ .gem_prime_mmap = drm_gem_cma_prime_mmap,
+ .fops = &fops,
+ .name = "mxsfb-drm",
+ .desc = "MXSFB Controller DRM",
+ .date = "20160824",
+ .major = 1,
+ .minor = 0,
+};
+
+static const struct platform_device_id mxsfb_devtype[] = {
+ { .name = "imx23-fb", .driver_data = MXSFB_V3, },
+ { .name = "imx28-fb", .driver_data = MXSFB_V4, },
+ { .name = "imx6sx-fb", .driver_data = MXSFB_V4, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static const struct of_device_id mxsfb_dt_ids[] = {
+ { .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
+ { .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
+ { .compatible = "fsl,imx6sx-lcdif", .data = &mxsfb_devtype[2], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
+
+static int mxsfb_probe(struct platform_device *pdev)
+{
+ struct drm_device *drm;
+ const struct of_device_id *of_id =
+ of_match_device(mxsfb_dt_ids, &pdev->dev);
+ int ret;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ if (of_id)
+ pdev->id_entry = of_id->data;
+
+ drm = drm_dev_alloc(&mxsfb_driver, &pdev->dev);
+ if (!drm)
+ return -ENOMEM;
+
+ ret = mxsfb_load(drm, 0);
+ if (ret)
+ goto err_free;
+
+ ret = drm_dev_register(drm, 0);
+ if (ret)
+ goto err_unload;
+
+ return 0;
+
+err_unload:
+ mxsfb_unload(drm);
+err_free:
+ drm_dev_unref(drm);
+
+ return ret;
+}
+
+static int mxsfb_remove(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+
+ drm_dev_unregister(drm);
+ mxsfb_unload(drm);
+ drm_dev_unref(drm);
+
+ return 0;
+}
+
+static struct platform_driver mxsfb_platform_driver = {
+ .probe = mxsfb_probe,
+ .remove = mxsfb_remove,
+ .id_table = mxsfb_devtype,
+ .driver = {
+ .name = "mxsfb",
+ .of_match_table = mxsfb_dt_ids,
+ },
+};
+
+module_platform_driver(mxsfb_platform_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Freescale MXS DRM/KMS driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
new file mode 100644
index 0000000..5d0883f
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * i.MX23/i.MX28/i.MX6SX MXSFB LCD controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MXSFB_DRV_H__
+#define __MXSFB_DRV_H__
+
+struct mxsfb_devdata {
+ unsigned int transfer_count;
+ unsigned int cur_buf;
+ unsigned int next_buf;
+ unsigned int debug0;
+ unsigned int hs_wdth_mask;
+ unsigned int hs_wdth_shift;
+ unsigned int ipversion;
+};
+
+struct mxsfb_drm_private {
+ const struct mxsfb_devdata *devdata;
+
+ void __iomem *base; /* registers */
+ struct clk *clk;
+ struct clk *clk_axi;
+ struct clk *clk_disp_axi;
+
+ struct drm_simple_display_pipe pipe;
+ struct drm_connector connector;
+ struct drm_panel *panel;
+ struct drm_fbdev_cma *fbdev;
+};
+
+int mxsfb_setup_crtc(struct drm_device *dev);
+int mxsfb_create_output(struct drm_device *dev);
+
+void mxsfb_enable_axi_clk(struct mxsfb_drm_private *mxsfb);
+void mxsfb_disable_axi_clk(struct mxsfb_drm_private *mxsfb);
+
+void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb);
+void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb);
+void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
+ struct drm_plane_state *state);
+
+#endif /* __MXSFB_DRV_H__ */
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c b/drivers/gpu/drm/mxsfb/mxsfb_out.c
new file mode 100644
index 0000000..fa8d173
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_out.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_graph.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <drm/drmP.h>
+
+#include "mxsfb_drv.h"
+
+static struct mxsfb_drm_private *
+drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
+{
+ return container_of(connector, struct mxsfb_drm_private, connector);
+}
+
+static int mxsfb_panel_get_modes(struct drm_connector *connector)
+{
+ struct mxsfb_drm_private *mxsfb =
+ drm_connector_to_mxsfb_drm_private(connector);
+
+ if (mxsfb->panel)
+ return mxsfb->panel->funcs->get_modes(mxsfb->panel);
+
+ return 0;
+}
+
+static const struct
+drm_connector_helper_funcs mxsfb_panel_connector_helper_funcs = {
+ .get_modes = mxsfb_panel_get_modes,
+};
+
+static enum drm_connector_status
+mxsfb_panel_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct mxsfb_drm_private *mxsfb =
+ drm_connector_to_mxsfb_drm_private(connector);
+
+ if (mxsfb->panel)
+ return connector_status_connected;
+
+ return connector_status_disconnected;
+}
+
+static void mxsfb_panel_connector_destroy(struct drm_connector *connector)
+{
+ struct mxsfb_drm_private *mxsfb =
+ drm_connector_to_mxsfb_drm_private(connector);
+
+ if (mxsfb->panel)
+ drm_panel_detach(mxsfb->panel);
+
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs mxsfb_panel_connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .detect = mxsfb_panel_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = mxsfb_panel_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int mxsfb_attach_endpoint(struct drm_device *drm,
+ const struct of_endpoint *ep)
+{
+ struct mxsfb_drm_private *mxsfb = drm->dev_private;
+ struct device_node *np;
+ struct drm_panel *panel;
+ int ret = -EPROBE_DEFER;
+
+ np = of_graph_get_remote_port_parent(ep->local_node);
+ panel = of_drm_find_panel(np);
+ of_node_put(np);
+
+ if (!panel)
+ return -EPROBE_DEFER;
+
+ mxsfb->connector.dpms = DRM_MODE_DPMS_OFF;
+ mxsfb->connector.polled = 0;
+ drm_connector_helper_add(&mxsfb->connector,
+ &mxsfb_panel_connector_helper_funcs);
+ ret = drm_connector_init(drm, &mxsfb->connector,
+ &mxsfb_panel_connector_funcs,
+ DRM_MODE_CONNECTOR_Unknown);
+ if (!ret)
+ mxsfb->panel = panel;
+
+ return ret;
+}
+
+int mxsfb_create_output(struct drm_device *drm)
+{
+ struct device_node *ep_np = NULL;
+ struct of_endpoint ep;
+ int ret;
+
+ for_each_endpoint_of_node(drm->dev->of_node, ep_np) {
+ ret = of_graph_parse_endpoint(ep_np, &ep);
+ if (!ret)
+ ret = mxsfb_attach_endpoint(drm, &ep);
+
+ if (ret) {
+ of_node_put(ep_np);
+ return ret;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_regs.h b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
new file mode 100644
index 0000000..31d62cd
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_regs.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * i.MX23/i.MX28/i.MX6SX MXSFB LCD controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MXSFB_REGS_H__
+#define __MXSFB_REGS_H__
+
+#define REG_SET 4
+#define REG_CLR 8
+
+#define LCDC_CTRL 0x00
+#define LCDC_CTRL1 0x10
+#define LCDC_V3_TRANSFER_COUNT 0x20
+#define LCDC_V4_TRANSFER_COUNT 0x30
+#define LCDC_V4_CUR_BUF 0x40
+#define LCDC_V4_NEXT_BUF 0x50
+#define LCDC_V3_CUR_BUF 0x30
+#define LCDC_V3_NEXT_BUF 0x40
+#define LCDC_VDCTRL0 0x70
+#define LCDC_VDCTRL1 0x80
+#define LCDC_VDCTRL2 0x90
+#define LCDC_VDCTRL3 0xa0
+#define LCDC_VDCTRL4 0xb0
+#define LCDC_V4_DEBUG0 0x1d0
+#define LCDC_V3_DEBUG0 0x1f0
+
+#define CTRL_SFTRST (1 << 31)
+#define CTRL_CLKGATE (1 << 30)
+#define CTRL_BYPASS_COUNT (1 << 19)
+#define CTRL_VSYNC_MODE (1 << 18)
+#define CTRL_DOTCLK_MODE (1 << 17)
+#define CTRL_DATA_SELECT (1 << 16)
+#define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
+#define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
+#define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
+#define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
+#define CTRL_MASTER (1 << 5)
+#define CTRL_DF16 (1 << 3)
+#define CTRL_DF18 (1 << 2)
+#define CTRL_DF24 (1 << 1)
+#define CTRL_RUN (1 << 0)
+
+#define CTRL1_FIFO_CLEAR (1 << 21)
+#define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
+#define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
+#define CTRL1_CUR_FRAME_DONE_IRQ_EN (1 << 13)
+#define CTRL1_CUR_FRAME_DONE_IRQ (1 << 9)
+
+#define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
+#define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
+#define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
+#define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
+
+#define VDCTRL0_ENABLE_PRESENT (1 << 28)
+#define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
+#define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
+#define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
+#define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
+#define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
+#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
+#define VDCTRL0_HALF_LINE (1 << 19)
+#define VDCTRL0_HALF_LINE_MODE (1 << 18)
+#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
+#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
+
+#define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
+#define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
+
+#define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
+#define VDCTRL3_VSYNC_ONLY (1 << 28)
+#define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
+#define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
+#define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
+#define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
+
+#define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
+#define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
+#define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
+#define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
+
+#define DEBUG0_HSYNC (1 < 26)
+#define DEBUG0_VSYNC (1 < 25)
+
+#define MXSFB_MIN_XRES 120
+#define MXSFB_MIN_YRES 120
+#define MXSFB_MAX_XRES 0xffff
+#define MXSFB_MAX_YRES 0xffff
+
+#define RED 0
+#define GREEN 1
+#define BLUE 2
+#define TRANSP 3
+
+#define STMLCDIF_8BIT 1 /* pixel data bus to the display is of 8 bit width */
+#define STMLCDIF_16BIT 0 /* pixel data bus to the display is of 16 bit width */
+#define STMLCDIF_18BIT 2 /* pixel data bus to the display is of 18 bit width */
+#define STMLCDIF_24BIT 3 /* pixel data bus to the display is of 24 bit width */
+
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
+#define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negative edge sampling */
+
+#endif /* __MXSFB_REGS_H__ */
--
2.10.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-11-14 10:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 10:10 [PATCH 1/3] dt-bindings: mxsfb: Indentation cleanup Marek Vasut
2016-11-14 10:10 ` Marek Vasut [this message]
2016-11-14 11:47 ` [PATCH V3 3/3] drm: Add new driver for MXSFB controller Daniel Vetter
2016-11-29 17:27 ` Marek Vasut
2016-11-29 20:15 ` Daniel Vetter
2016-12-01 18:02 ` Marek Vasut
2016-12-09 5:24 ` Ying Liu
2016-12-09 8:28 ` Daniel Vetter
[not found] ` <20161114101036.3505-1-marex-ynQEQJNshbs@public.gmane.org>
2016-11-14 10:10 ` [PATCH V2 2/3] dt-bindings: mxsfb: Add new bindings for the MXSFB driver Marek Vasut
2016-11-16 0:24 ` Rob Herring
2016-11-16 12:16 ` Marek Vasut
2016-11-16 12:21 ` [PATCH V3 " Marek Vasut
2016-11-25 18:26 ` Marek Vasut
2016-11-29 15:29 ` Rob Herring
2016-11-29 17:25 ` Marek Vasut
2016-11-16 0:16 ` [PATCH 1/3] dt-bindings: mxsfb: Indentation cleanup Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161114101036.3505-3-marex@denx.de \
--to=marex@denx.de \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.