From: Axel Haslam <ahaslam@baylibre.com>
To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
khilman@kernel.org, kishon@ti.com
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Axel Haslam <ahaslam@baylibre.com>
Subject: [PATCH v5 2/5] USB: ohci: da8xx: Add wrappers for platform callbacks
Date: Mon, 14 Nov 2016 15:41:00 +0100 [thread overview]
Message-ID: <20161114144103.12120-3-ahaslam@baylibre.com> (raw)
In-Reply-To: <20161114144103.12120-1-ahaslam@baylibre.com>
In preparation to use a regulator instead of platform callbacks,
move the platform callbacks into separate functions.
This provides a well defined place to for the regulator API to coexist
with the callbacks until all users are converted, and the callbacks
can be removed.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
drivers/usb/host/ohci-da8xx.c | 125 ++++++++++++++++++++++++++++++++++--------
1 file changed, 102 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 438970b..83e3c98 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -81,6 +81,72 @@ static void ohci_da8xx_disable(struct usb_hcd *hcd)
clk_disable_unprepare(da8xx_ohci->usb11_clk);
}
+static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->set_power)
+ return hub->set_power(1, on);
+
+ return 0;
+}
+
+static int ohci_da8xx_get_power(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->get_power)
+ return hub->get_power(1);
+
+ return 1;
+}
+
+static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->get_oci)
+ return hub->get_oci(1);
+
+ return 0;
+}
+
+static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->set_power)
+ return 1;
+
+ return 0;
+}
+
+static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->get_oci)
+ return 1;
+
+ return 0;
+}
+
+static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->potpgt)
+ return 1;
+
+ return 0;
+}
+
/*
* Handle the port over-current indicator change.
*/
@@ -94,6 +160,26 @@ static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
hub->set_power(port, 0);
}
+static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->ocic_notify)
+ return hub->ocic_notify(ohci_da8xx_ocic_handler);
+
+ return 0;
+}
+
+static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+
+ if (hub && hub->ocic_notify)
+ hub->ocic_notify(NULL);
+}
+
static int ohci_da8xx_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
@@ -127,16 +213,18 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
* the correct hub descriptor...
*/
rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
- if (hub->set_power) {
+ if (ohci_da8xx_has_set_power(hcd)) {
rh_a &= ~RH_A_NPS;
rh_a |= RH_A_PSM;
}
- if (hub->get_oci) {
+ if (ohci_da8xx_has_oci(hcd)) {
rh_a &= ~RH_A_NOCP;
rh_a |= RH_A_OCPM;
}
- rh_a &= ~RH_A_POTPGT;
- rh_a |= hub->potpgt << 24;
+ if (ohci_da8xx_has_potpgt(hcd)) {
+ rh_a &= ~RH_A_POTPGT;
+ rh_a |= hub->potpgt << 24;
+ }
ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
return result;
@@ -169,7 +257,6 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int temp;
switch (typeReq) {
@@ -183,11 +270,11 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
/* The port power status (PPS) bit defaults to 1 */
- if (hub->get_power && hub->get_power(wIndex) == 0)
+ if (!ohci_da8xx_get_power(hcd))
temp &= ~RH_PS_PPS;
/* The port over-current indicator (POCI) bit is always 0 */
- if (hub->get_oci && hub->get_oci(wIndex) > 0)
+ if (ohci_da8xx_get_oci(hcd) > 0)
temp |= RH_PS_POCI;
/* The over-current indicator change (OCIC) bit is 0 too */
@@ -212,10 +299,7 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex, "POWER");
- if (!hub->set_power)
- return -EPIPE;
-
- return hub->set_power(wIndex, temp) ? -EPIPE : 0;
+ return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
case USB_PORT_FEAT_C_OVER_CURRENT:
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex,
@@ -237,15 +321,10 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
static int ohci_da8xx_probe(struct platform_device *pdev)
{
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
struct da8xx_ohci_hcd *da8xx_ohci;
struct usb_hcd *hcd;
struct resource *mem;
int error, irq;
-
- if (hub == NULL)
- return -ENODEV;
-
hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd)
@@ -290,12 +369,13 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
device_wakeup_enable(hcd->self.controller);
- if (hub->ocic_notify) {
- error = hub->ocic_notify(ohci_da8xx_ocic_handler);
- if (!error)
- return 0;
- }
+ error = ohci_da8xx_register_notify(hcd);
+ if (error)
+ goto err_remove_hcd;
+
+ return 0;
+err_remove_hcd:
usb_remove_hcd(hcd);
err:
usb_put_hcd(hcd);
@@ -305,9 +385,8 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
static int ohci_da8xx_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
- hub->ocic_notify(NULL);
+ ohci_da8xx_unregister_notify(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
--
2.10.1
next prev parent reply other threads:[~2016-11-14 14:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 14:40 [PATCH v5 0/5] USB: ohci-da8xx: Add device tree support Axel Haslam
2016-11-14 14:40 ` [PATCH v5 1/5] USB: ohci: da8xx: use ohci priv data instead of globals Axel Haslam
2016-11-20 2:58 ` [v5,1/5] " David Lechner
2016-11-21 9:07 ` Axel Haslam
2016-11-14 14:41 ` Axel Haslam [this message]
2016-11-14 14:41 ` [PATCH v5 3/5] USB: ohci: da8xx: Allow a regulator to handle VBUS Axel Haslam
2016-11-20 3:31 ` [v5,3/5] " David Lechner
2016-11-20 3:37 ` David Lechner
2016-11-21 10:22 ` Axel Haslam
2016-11-21 16:29 ` David Lechner
2016-11-22 14:18 ` Axel Haslam
[not found] ` <20161114144103.12120-1-ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-11-14 14:41 ` [PATCH v5 4/5] USB: ohci: da8xx: Add devicetree bindings Axel Haslam
2016-11-14 14:41 ` Axel Haslam
[not found] ` <20161114144103.12120-5-ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2016-11-16 13:26 ` Rob Herring
2016-11-16 13:26 ` Rob Herring
2016-11-14 14:41 ` [PATCH v5 5/5] USB: ohci: da8xx: Allow probing from DT Axel Haslam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161114144103.12120-3-ahaslam@baylibre.com \
--to=ahaslam@baylibre.com \
--cc=gregkh@linuxfoundation.org \
--cc=khilman@kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.