From: Sam Protsenko <semen.protsenko@linaro.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 0/2] spl: Convert MMC raw mode sector options to Kconfig
Date: Wed, 16 Nov 2016 19:19:04 +0200 [thread overview]
Message-ID: <20161116171906.19640-1-semen.protsenko@linaro.org> (raw)
This series accomplishes next:
1. Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR option to Kconfig
2. Remove CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from boards that
don't build SPL
3. Add CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR bool option, which
can be tested with #ifdef
4. Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS option, as it's not used
All patches were tested with buildman tool, proving they are not breaking
or changing any board.
Changes in v6:
- PATCH 1/2: don't do savedefconfig
Changes in v5:
- PATCH 1/2: USE_SECTOR: add default=y for default architectures
Changes in v4:
- PATCH 1/2: remove TARGET_* from Kconfig default section
Changes in v3:
- PATCH 1/2: add USE_SECTOR to missed boards (reported by buildman):
Changes in v2:
- PATCH 1/2: merge "SPL dependency" patch
- PATCH 1/2: add defaults for common architectures/targets
Sam Protsenko (2):
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS
README | 5 ----
common/spl/Kconfig | 27 ++++++++++++++++++++++
common/spl/spl_mmc.c | 4 ++--
configs/brppt1_mmc_defconfig | 2 ++
configs/brppt1_nand_defconfig | 2 ++
configs/brppt1_spi_defconfig | 2 ++
configs/brxre1_defconfig | 2 ++
configs/clearfog_defconfig | 1 +
configs/cm_fx6_defconfig | 1 +
configs/cm_t43_defconfig | 2 ++
configs/cm_t54_defconfig | 1 +
configs/draco_defconfig | 2 ++
configs/etamin_defconfig | 2 ++
configs/ls1021aqds_nand_defconfig | 2 ++
configs/ls1021aqds_sdcard_ifc_defconfig | 2 ++
configs/ls1021aqds_sdcard_qspi_defconfig | 2 ++
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 ++
configs/ls1021atwr_sdcard_ifc_defconfig | 2 ++
configs/ls1021atwr_sdcard_qspi_defconfig | 2 ++
configs/ls1043aqds_nand_defconfig | 2 ++
configs/ls1043aqds_sdcard_ifc_defconfig | 2 ++
configs/ls1043aqds_sdcard_qspi_defconfig | 2 ++
configs/ls1043ardb_nand_defconfig | 2 ++
configs/ls1043ardb_sdcard_defconfig | 2 ++
configs/ls1046aqds_nand_defconfig | 2 ++
configs/ls1046aqds_sdcard_ifc_defconfig | 2 ++
configs/ls1046aqds_sdcard_qspi_defconfig | 2 ++
configs/ls1046ardb_emmc_defconfig | 2 ++
configs/ls1046ardb_sdcard_defconfig | 2 ++
configs/pxm2_defconfig | 2 ++
configs/rastaban_defconfig | 2 ++
configs/rut_defconfig | 2 ++
configs/thuban_defconfig | 2 ++
configs/ti814x_evm_defconfig | 2 ++
configs/ti816x_evm_defconfig | 2 ++
configs/woodburn_sd_defconfig | 2 ++
include/configs/am3517_crane.h | 2 --
include/configs/am3517_evm.h | 2 --
include/configs/at91sam9m10g45ek.h | 2 --
include/configs/at91sam9n12ek.h | 2 --
include/configs/at91sam9x5ek.h | 2 --
include/configs/brppt1.h | 3 ---
include/configs/brxre1.h | 3 ---
include/configs/clearfog.h | 3 ---
include/configs/cm_fx6.h | 3 ---
include/configs/cm_t35.h | 2 --
include/configs/cm_t43.h | 2 --
include/configs/cm_t54.h | 7 ------
include/configs/da850evm.h | 1 -
include/configs/db-88f6820-gp.h | 2 --
include/configs/draco.h | 2 --
include/configs/etamin.h | 2 --
include/configs/imx6_spl.h | 4 +---
include/configs/ls1021aqds.h | 2 --
include/configs/ls1021atwr.h | 7 +-----
include/configs/ls1043a_common.h | 2 --
include/configs/ls1046a_common.h | 2 --
include/configs/mcx.h | 1 -
include/configs/omap3_evm.h | 2 --
include/configs/picosam9g45.h | 2 --
include/configs/pxm2.h | 2 --
include/configs/rastaban.h | 2 --
include/configs/rk3288_common.h | 1 -
include/configs/rk3399_common.h | 1 -
include/configs/rut.h | 2 --
include/configs/sama5d2_xplained.h | 2 --
include/configs/sama5d3_xplained.h | 2 --
include/configs/sama5d3xek.h | 2 --
include/configs/sama5d4_xplained.h | 2 --
include/configs/sama5d4ek.h | 2 --
include/configs/siemens-am33x-common.h | 1 -
include/configs/socfpga_common.h | 1 -
include/configs/sunxi-common.h | 1 -
include/configs/tam3517-common.h | 1 -
include/configs/tao3530.h | 2 --
include/configs/thuban.h | 2 --
include/configs/ti814x_evm.h | 2 --
include/configs/ti816x_evm.h | 2 --
include/configs/ti_armv7_common.h | 4 ----
include/configs/tricorder.h | 1 -
include/configs/uniphier.h | 1 -
include/configs/woodburn_sd.h | 2 --
include/configs/zynq-common.h | 2 --
scripts/config_whitelist.txt | 2 --
84 files changed, 94 insertions(+), 109 deletions(-)
--
2.9.3
next reply other threads:[~2016-11-16 17:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-16 17:19 Sam Protsenko [this message]
2016-11-16 17:19 ` [U-Boot] [PATCH v6 1/2] spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Sam Protsenko
2016-11-21 14:02 ` [U-Boot] [U-Boot, v6, " Tom Rini
2016-11-16 17:19 ` [U-Boot] [PATCH v6 2/2] spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS Sam Protsenko
2016-11-21 14:03 ` [U-Boot] [U-Boot, v6, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161116171906.19640-1-semen.protsenko@linaro.org \
--to=semen.protsenko@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.