Re: Newly-created arrays don't auto-assemble - related to hostname change?

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Andy Smith <andy@strugglers.net>
To: NeilBrown <neilb@suse.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: Newly-created arrays don't auto-assemble - related to hostname change?
Date: Mon, 21 Nov 2016 06:02:56 +0000	[thread overview]
Message-ID: <20161121060256.GL1804@bitfolk.com> (raw)
In-Reply-To: <877f7xe9lh.fsf@notabene.neil.brown.name>

Hi Neil,

On Mon, Nov 21, 2016 at 03:32:42PM +1100, NeilBrown wrote:
> If you still want to get to the bottom of this, you might need to revert
> your work-around, the try the "udevadm monitor" and "udevadm info" and "udevadm
> trigger" while the array is not assembled.

I have reverted my addition of "mpt3sas" from
/etc/initramfs-tools/modules and rebooted, so that md5 is again not
assembled.

Result of

    udevadm info /dev/sdc

P: /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc
N: sdc
S: disk/by-id/ata-SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633
S: disk/by-id/wwn-0x5002538c0007e7a8
S: disk/by-path/pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: DEVLINKS=/dev/disk/by-id/ata-SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633 /dev/disk/by-id/wwn-0x5002538c0007e7a8 /dev/disk/by-path/pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: DEVNAME=/dev/sdc
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc 
E: DEVTYPE=disk
E: ID_ATA=1
E: ID_ATA_DOWNLOAD_MICROCODE=1
E: ID_ATA_FEATURE_SET_HPA=1
E: ID_ATA_FEATURE_SET_HPA_ENABLED=1
E: ID_ATA_FEATURE_SET_PM=1
E: ID_ATA_FEATURE_SET_PM_ENABLED=1
E: ID_ATA_FEATURE_SET_SECURITY=1
E: ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN=32
E: ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=32
E: ID_ATA_FEATURE_SET_SMART=1
E: ID_ATA_FEATURE_SET_SMART_ENABLED=1
E: ID_ATA_ROTATION_RATE_RPM=0
E: ID_ATA_SATA=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN1=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN2=1
E: ID_ATA_WRITE_CACHE=1
E: ID_ATA_WRITE_CACHE_ENABLED=1
E: ID_BUS=ata
E: ID_FS_LABEL=tbd:5
E: ID_FS_LABEL_ENC=tbd:5
E: ID_FS_TYPE=linux_raid_member
E: ID_FS_USAGE=raid
E: ID_FS_UUID=957030cf-c09f-023d-ceae-bb27e546f095
E: ID_FS_UUID_ENC=957030cf-c09f-023d-ceae-bb27e546f095
E: ID_FS_UUID_SUB=4ac82c29-2d10-9465-7fff-9b228c411c1e
E: ID_FS_VERSION=1.2
E: ID_MODEL=SAMSUNG_MZ7KM1T9HAJM-00005
E: ID_MODEL_ENC=SAMSUNG\x20MZ7KM1T9HAJM-00005\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_PATH=pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: ID_PATH_TAG=pci-0000_01_00_0-sas-0x4433221100000000-lun-0
E: ID_REVISION=GXM1003Q
E: ID_SERIAL=SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633
E: ID_SERIAL_SHORT=S2HNNAAH200633
E: ID_TYPE=disk
E: ID_WWN=0x5002538c0007e7a8
E: ID_WWN_WITH_EXTENSION=0x5002538c0007e7a8
E: MAJOR=8
E: MINOR=32
E: SUBSYSTEM=block
E: TAGS=:systemd:
E: USEC_INITIALIZED=43226

I then issued

    echo change > /sys/block/sdc/uevent

and

    echo change > /sys/block/sdd/uevent

which resulted in the monitor showing:

KERNEL[572.956390] change   /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc (block)
UDEV  [572.960256] change   /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc (block)
KERNEL[593.140178] change   /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:1/end_device-10:1/target10:0:1/10:0:1:0/block/sdd (block)
UDEV  [593.143824] change   /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:1/end_device-10:1/target10:0:1/10:0:1:0/block/sdd (block)

But no assembly of md5.

Afterwards,

    udevadm info /dev/sdc

showed:

P: /devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc
N: sdc
S: disk/by-id/ata-SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633
S: disk/by-id/wwn-0x5002538c0007e7a8
S: disk/by-path/pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: DEVLINKS=/dev/disk/by-id/ata-SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633 /dev/disk/by-id/wwn-0x5002538c0007e7a8 /dev/disk/by-path/pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: DEVNAME=/dev/sdc
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host10/port-10:0/end_device-10:0/target10:0:0/10:0:0:0/block/sdc
E: DEVTYPE=disk
E: ID_ATA=1
E: ID_ATA_DOWNLOAD_MICROCODE=1
E: ID_ATA_FEATURE_SET_HPA=1
E: ID_ATA_FEATURE_SET_HPA_ENABLED=1
E: ID_ATA_FEATURE_SET_PM=1
E: ID_ATA_FEATURE_SET_PM_ENABLED=1
E: ID_ATA_FEATURE_SET_SECURITY=1
E: ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN=32
E: ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=32
E: ID_ATA_FEATURE_SET_SMART=1
E: ID_ATA_FEATURE_SET_SMART_ENABLED=1
E: ID_ATA_ROTATION_RATE_RPM=0
E: ID_ATA_SATA=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN1=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN2=1
E: ID_ATA_WRITE_CACHE=1
E: ID_ATA_WRITE_CACHE_ENABLED=1
E: ID_BUS=ata
E: ID_FS_LABEL=tbd:5
E: ID_FS_LABEL_ENC=tbd:5
E: ID_FS_TYPE=linux_raid_member
E: ID_FS_USAGE=raid
E: ID_FS_UUID=957030cf-c09f-023d-ceae-bb27e546f095
E: ID_FS_UUID_ENC=957030cf-c09f-023d-ceae-bb27e546f095
E: ID_FS_UUID_SUB=4ac82c29-2d10-9465-7fff-9b228c411c1e
E: ID_FS_UUID_SUB_ENC=4ac82c29-2d10-9465-7fff-9b228c411c1e
E: ID_FS_VERSION=1.2
E: ID_MODEL=SAMSUNG_MZ7KM1T9HAJM-00005
E: ID_MODEL_ENC=SAMSUNG\x20MZ7KM1T9HAJM-00005\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_PATH=pci-0000:01:00.0-sas-0x4433221100000000-lun-0
E: ID_PATH_TAG=pci-0000_01_00_0-sas-0x4433221100000000-lun-0
E: ID_REVISION=GXM1003Q
E: ID_SERIAL=SAMSUNG_MZ7KM1T9HAJM-00005_S2HNNAAH200633
E: ID_SERIAL_SHORT=S2HNNAAH200633
E: ID_TYPE=disk
E: ID_WWN=0x5002538c0007e7a8
E: ID_WWN_WITH_EXTENSION=0x5002538c0007e7a8
E: MAJOR=8
E: MINOR=32
E: SUBSYSTEM=block
E: TAGS=:systemd:
E: USEC_INITIALIZED=43226

Thanks,
Andy

next prev parent reply	other threads:[~2016-11-21  6:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-17  3:52 Newly-created arrays don't auto-assemble - related to hostname change? Andy Smith
2016-11-17  6:09 ` NeilBrown
2016-11-17 15:09   ` Andy Smith
2016-11-17 22:43     ` NeilBrown
2016-11-18  2:31       ` Andy Smith
2016-11-18  3:02         ` NeilBrown
2016-11-18  3:47           ` Andy Smith
2016-11-18  4:08             ` NeilBrown
2016-11-18  4:17               ` Andy Smith
2016-11-21  4:32                 ` NeilBrown
2016-11-21  6:02                   ` Andy Smith [this message]
2016-11-21 22:56                     ` NeilBrown
2016-11-22  6:01                       ` Andy Smith
2016-11-23  2:34                         ` NeilBrown
2016-11-23  9:03                           ` Bug#784070: " Michael Tokarev
2016-11-24  1:24                             ` Andy Smith
2016-11-23  9:09                           ` SOUBEYRAND Yann - externe
2016-11-17 23:22 ` Peter Sangas
2016-11-18  2:03   ` Glenn Enright

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161121060256.GL1804@bitfolk.com \
    --to=andy@strugglers.net \
    --cc=linux-raid@vger.kernel.org \
    --cc=neilb@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.