Re: [PATCH net-next 4/5] net: phy: bcm7xxx: Add support for downshift/Wirespeed

[Andrew Lunn <andrew@lunn.ch>]

> +static int bcm7xxx_28nm_set_tunable(struct phy_device *phydev,
> +				    struct ethtool_tunable *tuna,
> +				    const void *data)
> +{
> +	u8 count = *(u8 *)data;
> +	int ret;
> +
> +	switch (tuna->id) {
> +	case ETHTOOL_PHY_DOWNSHIFT:
> +		ret = bcm_phy_downshift_set(phydev, count);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	if (ret)
> +		return ret;
> +
> +	/* Disable EEE advertisment since this prevents the PHY
> +	 * from successfully linking up, trigger auto-negotiation restart
> +	 * to let the MAC decide what to do.
> +	 */
> +	ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
> +	if (ret)
> +		return ret;
> +
> +	return genphy_restart_aneg(phydev);
> +}

Hi Florian

Is the locking O.K. here? The core code does not take the phy lock.
But i think your shadow register accesses at least need to be
protected by the lock?

Maybe we should think about this locking a bit. It is normal for the
lock to be held when using ops in the phy driver structure. The
exception is suspend/resume. Maybe we should also take the lock before
calling the phydev->drv->get_tunable() and phydev->drv->set_tunable()?

	  Andrew