All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: "Allan W. Nielsen" <allan.nielsen@microsemi.com>
Cc: netdev@vger.kernel.org, andrew@lunn.ch, f.fainelli@gmail.com,
	raju.lakkaraju@microsemi.com
Subject: Re: [PATCH ethtool v4 1/2] ethtool-copy.h:sync with net
Date: Wed, 23 Nov 2016 10:24:47 -0500	[thread overview]
Message-ID: <20161123152447.GC13179@tuxdriver.com> (raw)
In-Reply-To: <1479846737-18669-2-git-send-email-allan.nielsen@microsemi.com>

It looks like this patch somehow misses the following commit:

commit 85a624403c77c3f074931aefdfced59f61b668cb
Author: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date:   Thu Oct 13 16:13:55 2016 -0700

    ethtool: silence warning on bit loss
    
    Sparse was complaining when we went to prototype some code
    using ethtool_cmd_speed_set and SPEED_100000, which uses
    the upper 16 bits of __u32 speed for the first time.
    
    CHECK
    ...
    .../uapi/linux/ethtool.h:123:28: warning:
      cast truncates bits from constant value (186a0 becomes 86a0)
    
    The warning is actually bogus, as no bits are really lost, but
    we can get rid of the sparse warning with this one small change.
    
    Reported-by: Preethi Banala <preethi.banala@intel.com>
    Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

Plus, the referenced commit does not seem to exist in the net-next tree.

Please resubmit with the complete history and correct commit IDs -- thanks!

John

On Tue, Nov 22, 2016 at 09:32:16PM +0100, Allan W. Nielsen wrote:
> From: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
> 
> This covers kernel changes upto:
> 
> commit f5a4732f85613b3fb43f8bc33a017e3db3b3605a
> Author: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
> Date:   Wed Nov 9 16:33:09 2016 +0530
> 
>     ethtool: (uapi) Add ETHTOOL_PHY_DOWNSHIFT to PHY tunables
> 
>     For operation in cabling environments that are incompatible with
>     1000BASE-T, PHY device may provide an automatic link speed downshift
>     operation. When enabled, the device automatically changes its 1000BASE-T
>     auto-negotiation to the next slower speed after a configured number of
>     failed attempts at 1000BASE-T.  This feature is useful in setting up in
>     networks using older cable installations that include only pairs A and B,
>     and not pairs C and D.
> 
>     Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
>     Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com>
> 
> Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  ethtool-copy.h | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/ethtool-copy.h b/ethtool-copy.h
> index 70748f5..2e2448f 100644
> --- a/ethtool-copy.h
> +++ b/ethtool-copy.h
> @@ -247,6 +247,19 @@ struct ethtool_tunable {
>  	void	*data[0];
>  };
>  
> +#define DOWNSHIFT_DEV_DEFAULT_COUNT	0xff
> +#define DOWNSHIFT_DEV_DISABLE		0
> +
> +enum phy_tunable_id {
> +	ETHTOOL_PHY_ID_UNSPEC,
> +	ETHTOOL_PHY_DOWNSHIFT,
> +	/*
> +	 * Add your fresh new phy tunable attribute above and remember to update
> +	 * phy_tunable_strings[] in net/core/ethtool.c
> +	 */
> +	__ETHTOOL_PHY_TUNABLE_COUNT,
> +};
> +
>  /**
>   * struct ethtool_regs - hardware register dump
>   * @cmd: Command number = %ETHTOOL_GREGS
> @@ -547,6 +560,7 @@ struct ethtool_pauseparam {
>   * @ETH_SS_FEATURES: Device feature names
>   * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
>   * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
> + * @ETH_SS_PHY_TUNABLES: PHY tunable names
>   */
>  enum ethtool_stringset {
>  	ETH_SS_TEST		= 0,
> @@ -557,6 +571,7 @@ enum ethtool_stringset {
>  	ETH_SS_RSS_HASH_FUNCS,
>  	ETH_SS_TUNABLES,
>  	ETH_SS_PHY_STATS,
> +	ETH_SS_PHY_TUNABLES,
>  };
>  
>  /**
> @@ -1312,7 +1327,8 @@ struct ethtool_per_queue_op {
>  
>  #define ETHTOOL_GLINKSETTINGS	0x0000004c /* Get ethtool_link_settings */
>  #define ETHTOOL_SLINKSETTINGS	0x0000004d /* Set ethtool_link_settings */
> -
> +#define ETHTOOL_PHY_GTUNABLE	0x0000004e /* Get PHY tunable configuration */
> +#define ETHTOOL_PHY_STUNABLE	0x0000004f /* Set PHY tunable configuration */
>  
>  /* compatibility with older code */
>  #define SPARC_ETH_GSET		ETHTOOL_GSET
> -- 
> 2.7.3
> 
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

  reply	other threads:[~2016-11-23 15:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-22 20:32 [PATCH ethtool v4 0/2] Adding downshift support to ethtool Allan W. Nielsen
2016-11-22 20:32 ` [PATCH ethtool v4 1/2] ethtool-copy.h:sync with net Allan W. Nielsen
2016-11-23 15:24   ` John W. Linville [this message]
2016-11-23 15:55     ` John W. Linville
2016-11-22 20:32 ` [PATCH ethtool v4 2/2] Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY downshift Allan W. Nielsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161123152447.GC13179@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=allan.nielsen@microsemi.com \
    --cc=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=raju.lakkaraju@microsemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.