[U-Boot] [RFC PATCH 1/3] sunxi: Add clocks for DE2/HDMI/TCON

[Jernej Skrabec <jernej.skrabec@siol.net>]

This is needed for HDMI support, which will be added later.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---

 arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 43 +++++++++++++++++++++++++++
 arch/arm/mach-sunxi/clock_sun6i.c             | 28 +++++++++++++++++
 2 files changed, 71 insertions(+)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index be9fcfd..c19c200 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -67,12 +67,20 @@ struct sunxi_ccm_reg {
 	u32 dram_pll_cfg;	/* 0xf8 PLL_DDR cfg register, A33 only */
 	u32 mbus_reset;		/* 0xfc MBUS reset control, A33 only */
 	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
+#ifdef CONFIG_MACH_SUN8I_H3
+	u32 de_clk_cfg;		/* 0x104 DE module clock */
+#else
 	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
+#endif
 	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
 	u32 fe0_clk_cfg;	/* 0x10c FE0 module clock */
 	u32 fe1_clk_cfg;	/* 0x110 FE1 module clock */
 	u32 mp_clk_cfg;		/* 0x114 MP module clock */
+#ifdef CONFIG_MACH_SUN8I_H3
+	u32 tcon0_clk_cfg;	/* 0x118 TCON0 module clock */
+#else
 	u32 lcd0_ch0_clk_cfg;	/* 0x118 LCD0 CH0 module clock */
+#endif
 	u32 lcd1_ch0_clk_cfg;	/* 0x11c LCD1 CH0 module clock */
 	u32 reserved14[3];
 	u32 lcd0_ch1_clk_cfg;	/* 0x12c LCD0 CH1 module clock */
@@ -85,7 +93,11 @@ struct sunxi_ccm_reg {
 	u32 dmic_clk_cfg;	/* 0x148 Digital Mic module clock*/
 	u32 reserved15;
 	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
+#ifdef CONFIG_MACH_SUN8I_H3
+	u32 hdmi_slow_clk_cfg;	/* 0x154 HDMI slow module clock */
+#else
 	u32 ps_clk_cfg;		/* 0x154 PS module clock */
+#endif
 	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
 	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
 	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
@@ -220,6 +232,15 @@ struct sunxi_ccm_reg {
 #define CCM_MIPI_PLL_CTRL_LDO_EN	(0x3 << 22)
 #define CCM_MIPI_PLL_CTRL_EN		(0x1 << 31)
 
+#define CCM_PLL10_CTRL_M_SHIFT		0
+#define CCM_PLL10_CTRL_M_MASK		(0xf << CCM_PLL10_CTRL_M_SHIFT)
+#define CCM_PLL10_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_PLL10_CTRL_N_SHIFT		8
+#define CCM_PLL10_CTRL_N_MASK		(0x7f << CCM_PLL10_CTRL_N_SHIFT)
+#define CCM_PLL10_CTRL_N(n)		((((n) - 1) & 0x7f) << 8)
+#define CCM_PLL10_CTRL_INTEGER_MODE	(0x1 << 24)
+#define CCM_PLL10_CTRL_EN		(0x1 << 31)
+
 #define CCM_PLL11_CTRL_N(n)		((((n) - 1) & 0x3f) << 8)
 #define CCM_PLL11_CTRL_SIGMA_DELTA_EN	(0x1 << 24)
 #define CCM_PLL11_CTRL_UPD		(0x1 << 30)
@@ -271,9 +292,12 @@ struct sunxi_ccm_reg {
 #define AHB_GATE_OFFSET_DRC0		25
 #define AHB_GATE_OFFSET_DE_FE0		14
 #define AHB_GATE_OFFSET_DE_BE0		12
+#define AHB_GATE_OFFSET_DE		12
 #define AHB_GATE_OFFSET_HDMI		11
 #define AHB_GATE_OFFSET_LCD1		5
 #define AHB_GATE_OFFSET_LCD0		4
+#define AHB_GATE_OFFSET_TCON1		4
+#define AHB_GATE_OFFSET_TCON0		3
 
 #define CCM_MMC_CTRL_M(x)		((x) - 1)
 #define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
@@ -346,6 +370,9 @@ struct sunxi_ccm_reg {
 #define CCM_LCD_CH0_CTRL_RST		0
 #define CCM_LCD_CH0_CTRL_GATE		(0x1 << 31)
 
+#define CCM_TCON0_CTRL_GATE		(0x1 << 31)
+#define CCM_TCON0_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
 #define CCM_LCD_CH1_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
 #define CCM_LCD_CH1_CTRL_HALF_SCLK1	0 /* no seperate sclk1 & 2 on sun6i */
 #define CCM_LCD_CH1_CTRL_PLL3		(0 << 24)
@@ -355,6 +382,7 @@ struct sunxi_ccm_reg {
 #define CCM_LCD_CH1_CTRL_GATE		(0x1 << 31)
 
 #define CCM_HDMI_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_HDMI_CTRL_M_MASK		(0xf << 0)
 #define CCM_HDMI_CTRL_PLL_MASK		(3 << 24)
 #define CCM_HDMI_CTRL_PLL3		(0 << 24)
 #define CCM_HDMI_CTRL_PLL7		(1 << 24)
@@ -363,6 +391,8 @@ struct sunxi_ccm_reg {
 #define CCM_HDMI_CTRL_DDC_GATE		(0x1 << 30)
 #define CCM_HDMI_CTRL_GATE		(0x1 << 31)
 
+#define CCM_HDMI_SLOW_CTRL_DDC_GATE	(1 << 31)
+
 #if defined(CONFIG_MACH_SUN50I)
 #define MBUS_CLK_DEFAULT		0x81000002 /* PLL6x2 / 3 */
 #elif defined(CONFIG_MACH_SUN8I)
@@ -390,9 +420,13 @@ struct sunxi_ccm_reg {
 #define AHB_RESET_OFFSET_DRC0		25
 #define AHB_RESET_OFFSET_DE_FE0		14
 #define AHB_RESET_OFFSET_DE_BE0		12
+#define AHB_RESET_OFFSET_DE		12
 #define AHB_RESET_OFFSET_HDMI		11
+#define AHB_RESET_OFFSET_HDMI2		10
 #define AHB_RESET_OFFSET_LCD1		5
 #define AHB_RESET_OFFSET_LCD0		4
+#define AHB_RESET_OFFSET_TCON1		4
+#define AHB_RESET_OFFSET_TCON0		3
 
 /* ahb_reset2 offsets */
 #define AHB_RESET_OFFSET_EPHY		2
@@ -415,6 +449,13 @@ struct sunxi_ccm_reg {
 #define CCM_DE_CTRL_PLL10		(5 << 24)
 #define CCM_DE_CTRL_GATE		(1 << 31)
 
+/* CCM bits common to all Display Engine 2.0 clock ctrl regs */
+#define CCM_DE2_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_DE2_CTRL_PLL_MASK		(3 << 24)
+#define CCM_DE2_CTRL_PLL6_2X		(0 << 24)
+#define CCM_DE2_CTRL_PLL10		(1 << 24)
+#define CCM_DE2_CTRL_GATE		(1 << 31)
+
 /* CCU security switch, H3 only */
 #define CCM_SEC_SWITCH_MBUS_NONSEC	(1 << 2)
 #define CCM_SEC_SWITCH_BUS_NONSEC	(1 << 1)
@@ -423,7 +464,9 @@ struct sunxi_ccm_reg {
 #ifndef __ASSEMBLY__
 void clock_set_pll1(unsigned int hz);
 void clock_set_pll3(unsigned int hz);
+void clock_set_pll3_factors(int m, int n);
 void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+void clock_set_pll10(unsigned int hz);
 void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
 void clock_set_mipi_pll(unsigned int hz);
 unsigned int clock_get_pll3(void);
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index ed8cd9b..b4ccb8d 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -141,6 +141,17 @@ void clock_set_pll3(unsigned int clk)
 	       &ccm->pll3_cfg);
 }
 
+void clock_set_pll3_factors(int m, int n)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* PLL3 rate = 24000000 * n / m */
+	writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+	       CCM_PLL3_CTRL_N(n) | CCM_PLL3_CTRL_M(m),
+	       &ccm->pll3_cfg);
+}
+
 void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
 {
 	struct sunxi_ccm_reg * const ccm =
@@ -213,6 +224,23 @@ done:
 }
 #endif
 
+void clock_set_pll10(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int m = 2; /* 12 MHz steps */
+
+	if (clk == 0) {
+		clrbits_le32(&ccm->pll10_cfg, CCM_PLL10_CTRL_EN);
+		return;
+	}
+
+	/* PLL10 rate = 24000000 * n / m */
+	writel(CCM_PLL10_CTRL_EN | CCM_PLL10_CTRL_INTEGER_MODE |
+	       CCM_PLL10_CTRL_N(clk / (24000000 / m)) | CCM_PLL10_CTRL_M(m),
+	       &ccm->pll10_cfg);
+}
+
 #ifdef CONFIG_MACH_SUN8I_A33
 void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
 {
-- 
2.10.2