From: Jan Remmet <J.Remmet@phytec.de>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb
Date: Wed, 14 Dec 2016 09:05:18 +0100 [thread overview]
Message-ID: <20161214080518.GA2843@lws-weitzel2@phytec.de> (raw)
In-Reply-To: <1481702404-8748-1-git-send-email-j.remmet@phytec.de>
On Wed, Dec 14, 2016 at 09:00:03AM +0100, Jan Remmet wrote:
> There are other ecc modes for the fcb out there.
sorry double post :(
Jan
>
> Signed-off-by: Jan Remmet <j.remmet@phytec.de>
> ---
> common/imx-bbu-nand-fcb.c | 83 +++++++++++++++++++++++++++--------------------
> 1 file changed, 47 insertions(+), 36 deletions(-)
>
> diff --git a/common/imx-bbu-nand-fcb.c b/common/imx-bbu-nand-fcb.c
> index 1db4c5a..34a5f83 100644
> --- a/common/imx-bbu-nand-fcb.c
> +++ b/common/imx-bbu-nand-fcb.c
> @@ -167,6 +167,46 @@ static uint32_t calc_chksum(void *buf, size_t size)
> return ~chksum;
> }
>
> +struct fcb_block *read_fcb_hamming_13_8(void *rawpage)
> +{
> + int i;
> + int bitflips = 0, bit_to_flip;
> + u8 parity, np, syndrome;
> + u8 *fcb, *ecc;
> +
> + fcb = rawpage + 12;
> + ecc = rawpage + 512 + 12;
> +
> + for (i = 0; i < 512; i++) {
> + parity = ecc[i];
> + np = calculate_parity_13_8(fcb[i]);
> +
> + syndrome = np ^ parity;
> + if (syndrome == 0)
> + continue;
> +
> + if (!(hweight8(syndrome) & 1)) {
> + pr_err("Uncorrectable error at offset %d\n", i);
> + return ERR_PTR(-EIO);
> + }
> +
> + bit_to_flip = lookup_single_error_13_8(syndrome);
> + if (bit_to_flip < 0) {
> + pr_err("Uncorrectable error at offset %d\n", i);
> + return ERR_PTR(-EIO);
> + }
> +
> + bitflips++;
> +
> + if (bit_to_flip > 7)
> + ecc[i] ^= 1 << (bit_to_flip - 8);
> + else
> + fcb[i] ^= 1 << bit_to_flip;
> + }
> +
> + return xmemdup(rawpage + 12, 512);
> +}
> +
> static __maybe_unused void dump_fcb(void *buf)
> {
> struct fcb_block *fcb = buf;
> @@ -258,11 +298,8 @@ static ssize_t raw_write_page(struct mtd_info *mtd, void *buf, loff_t offset)
>
> static int read_fcb(struct mtd_info *mtd, int num, struct fcb_block **retfcb)
> {
> - int i;
> - int bitflips = 0, bit_to_flip;
> - u8 parity, np, syndrome;
> - u8 *fcb, *ecc;
> int ret;
> + struct fcb_block *fcb;
> void *rawpage;
>
> *retfcb = NULL;
> @@ -275,40 +312,14 @@ static int read_fcb(struct mtd_info *mtd, int num, struct fcb_block **retfcb)
> goto err;
> }
>
> - fcb = rawpage + 12;
> - ecc = rawpage + 512 + 12;
> -
> - for (i = 0; i < 512; i++) {
> - parity = ecc[i];
> - np = calculate_parity_13_8(fcb[i]);
> -
> - syndrome = np ^ parity;
> - if (syndrome == 0)
> - continue;
> -
> - if (!(hweight8(syndrome) & 1)) {
> - pr_err("Uncorrectable error at offset %d\n", i);
> - ret = -EIO;
> - goto err;
> - }
> -
> - bit_to_flip = lookup_single_error_13_8(syndrome);
> - if (bit_to_flip < 0) {
> - pr_err("Uncorrectable error at offset %d\n", i);
> - ret = -EIO;
> - goto err;
> - }
> -
> - bitflips++;
> -
> - if (bit_to_flip > 7)
> - ecc[i] ^= 1 << (bit_to_flip - 8);
> - else
> - fcb[i] ^= 1 << bit_to_flip;
> + fcb = read_fcb_hamming_13_8(rawpage);
> + if (IS_ERR(fcb)) {
> + pr_err("Cannot read fcb\n");
> + ret = PTR_ERR(fcb);
> + goto err;
> }
>
> - *retfcb = xmemdup(rawpage + 12, 512);
> -
> + *retfcb = fcb;
> ret = 0;
> err:
> free(rawpage);
> --
> 2.7.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-12-14 8:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-14 8:00 [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb Jan Remmet
2016-12-14 8:00 ` [PATCH] i.MX habv4: add RVT address for i.MX6UL Jan Remmet
2016-12-14 8:05 ` Jan Remmet [this message]
2017-01-09 10:45 ` [PATCH 1/2] imx-bbu-nand-fcb: split up read_fcb Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2016-12-14 7:59 Jan Remmet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161214080518.GA2843@lws-weitzel2@phytec.de \
--to=j.remmet@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.