From: Francesco Dolcini <francesco@dolcini.it>
To: u-boot@lists.denx.de
Subject: [U-Boot] [BUG report] imx6: CACHE Misaligned operation
Date: Wed, 14 Dec 2016 12:31:22 +0100 [thread overview]
Message-ID: <20161214113122.GA21915@dev1> (raw)
Dear all,
I am trying current U-Boot master on solidrun microsom i.MX6 and I get a CACHE
error when accessing SD device:
U-Boot SPL 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06)
Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
U-Boot 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06 +0100)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU: Extended Commercial temperature grade (-20C to 105C) at 57C
Reset cause: POR
Board: MX6 Cubox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x8ffbaf6c
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x8ffbb76c
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
CACHE: Misaligned operation at range [8ffbaf6c, 8ffbb76c]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x8ffbaf6c
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x8ffbb76c
** First descriptor is NOT a primary desc on 0:1 **
*** Warning - bad CRC, using default environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: FEC
Error: FEC address not set.
Hit any key to stop autoboot: 0
=> version
U-Boot 2017.01-rc1-00066-ge5209e3-dirty (Dec 14 2016 - 10:55:06 +0100)
arm-linux-gnueabihf-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412
GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02
U-Boot version is 53e8ca22538c2cec691fe74098684a359302688c with 54e4fcfa3c749a789192e83740a53234182f4ca3 reverted.
I have tried building also with gcc 4.8 without any improvement.
I have not verified if SD is working correctly.
I am using mx6cuboxi_defconfig without any modification.
U-Boot v2016.03 is not showing the problem.
For the sake of completeness the board is a solidrun SOM i4Pro Rev-1.5 on a
HummingBoard2 Edge Rev-1.2
Thanks,
Francesco
reply other threads:[~2016-12-14 11:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161214113122.GA21915@dev1 \
--to=francesco@dolcini.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.