From: Pavel Machek <pavel@ucw.cz>
To: Sebastian Reichel <sre@kernel.org>
Cc: Sakari Ailus <sakari.ailus@iki.fi>,
ivo.g.dimitrov.75@gmail.com, pali.rohar@gmail.com,
linux-media@vger.kernel.org, galak@codeaurora.org,
mchehab@osg.samsung.com, linux-kernel@vger.kernel.org
Subject: Re: [RFC/PATCH] media: Add video bus switch
Date: Fri, 23 Dec 2016 12:42:37 +0100 [thread overview]
Message-ID: <20161223114237.GA5879@amd> (raw)
In-Reply-To: <20161222234028.oxntlek2oy62cjnh@earth>
[-- Attachment #1: Type: text/plain, Size: 9348 bytes --]
Hi!
> > [...]
> >
> > static int isp_subdev_notifier_bound(struct v4l2_async_notifier *async,
> > diff --git a/drivers/media/platform/video-bus-switch.c b/drivers/media/platform/video-bus-switch.c
> > index 1a5d944..3a2d442 100644
> > --- a/drivers/media/platform/video-bus-switch.c
> > +++ b/drivers/media/platform/video-bus-switch.c
> > @@ -247,12 +247,21 @@ static int vbs_s_stream(struct v4l2_subdev *sd, int enable)
> > {
> > struct v4l2_subdev *subdev = vbs_get_remote_subdev(sd);
> >
> > + /* FIXME: we need to set the GPIO here */
> > +
>
> The gpio is set when the pad is selected, so no need to do it again.
> The gpio selection actually works with your branch (assuming its
> based on Ivo's).
Yes. I did not notice... is there actually some interface to select
the camera from userland?
> > if (IS_ERR(subdev))
> > return PTR_ERR(subdev);
> >
> > return v4l2_subdev_call(subdev, video, s_stream, enable);
> > }
> >
> > +static int vbs_g_endpoint_config(struct v4l2_subdev *sd, struct isp_bus_cfg *cfg)
> > +{
> > + printk("vbs_g_endpoint_config...\n");
> > + return 0;
> > +}
>
> Would be nice to find something more abstract than isp_bus_cfg,
> which is specific to omap3isp.
Yes, that should be doable.
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 45c69ed..f0aa8cd 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2024,44 +2054,51 @@ enum isp_of_phy {
ISP_OF_PHY_CSIPHY2,
};
-static void isp_of_parse_node_csi1(struct device *dev,
- struct isp_bus_cfg *buscfg,
+void __isp_of_parse_node_csi1(struct device *dev,
+ struct isp_ccp2_cfg *buscfg,
struct v4l2_of_endpoint *vep)
{
- if (vep->base.port == ISP_OF_PHY_CSIPHY1)
- buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
- else
- buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
- buscfg->bus.ccp2.lanecfg.clk.pos = vep->bus.mipi_csi1.clock_lane;
- buscfg->bus.ccp2.lanecfg.clk.pol =
+ buscfg->lanecfg.clk.pos = vep->bus.mipi_csi1.clock_lane;
+ buscfg->lanecfg.clk.pol =
vep->bus.mipi_csi1.lane_polarity[0];
dev_dbg(dev, "clock lane polarity %u, pos %u\n",
- buscfg->bus.ccp2.lanecfg.clk.pol,
- buscfg->bus.ccp2.lanecfg.clk.pos);
+ buscfg->lanecfg.clk.pol,
+ buscfg->lanecfg.clk.pos);
- buscfg->bus.ccp2.lanecfg.data[0].pos = vep->bus.mipi_csi2.data_lanes[0];
- buscfg->bus.ccp2.lanecfg.data[0].pol =
+ buscfg->lanecfg.data[0].pos = vep->bus.mipi_csi2.data_lanes[0];
+ buscfg->lanecfg.data[0].pol =
vep->bus.mipi_csi2.lane_polarities[1];
dev_dbg(dev, "data lane polarity %u, pos %u\n",
- buscfg->bus.ccp2.lanecfg.data[0].pol,
- buscfg->bus.ccp2.lanecfg.data[0].pos);
+ buscfg->lanecfg.data[0].pol,
+ buscfg->lanecfg.data[0].pos);
- buscfg->bus.ccp2.strobe_clk_pol = vep->bus.mipi_csi1.clock_inv;
- buscfg->bus.ccp2.phy_layer = vep->bus.mipi_csi1.strobe;
- buscfg->bus.ccp2.ccp2_mode = vep->bus_type == V4L2_MBUS_CCP2;
+ buscfg->strobe_clk_pol = vep->bus.mipi_csi1.clock_inv;
+ buscfg->phy_layer = vep->bus.mipi_csi1.strobe;
+ buscfg->ccp2_mode = vep->bus_type == V4L2_MBUS_CCP2;
dev_dbg(dev, "clock_inv %u strobe %u ccp2 %u\n",
- buscfg->bus.ccp2.strobe_clk_pol,
- buscfg->bus.ccp2.phy_layer,
- buscfg->bus.ccp2.ccp2_mode);
+ buscfg->strobe_clk_pol,
+ buscfg->phy_layer,
+ buscfg->ccp2_mode);
/*
* FIXME: now we assume the CRC is always there.
* Implement a way to obtain this information from the
* sensor. Frame descriptors, perhaps?
*/
- buscfg->bus.ccp2.crc = 1;
+ buscfg->crc = 1;
- buscfg->bus.ccp2.vp_clk_pol = 1;
+ buscfg->vp_clk_pol = 1;
+}
+
+static void isp_of_parse_node_csi1(struct device *dev,
+ struct isp_bus_cfg *buscfg,
+ struct v4l2_of_endpoint *vep)
+{
+ if (vep->base.port == ISP_OF_PHY_CSIPHY1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
+ else
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
+ __isp_of_parse_node_csi1(dev, &buscfg->bus.ccp2, vep);
}
static void isp_of_parse_node_csi2(struct device *dev,
@@ -2099,27 +2136,8 @@ static void isp_of_parse_node_csi2(struct device *dev,
buscfg->bus.csi2.crc = 1;
}
-static int isp_of_parse_node_endpoint(struct device *dev,
- struct device_node *node,
- struct isp_async_subdev *isd)
+static int isp_endpoint_to_buscfg(struct device *dev, struct v4l2_of_endpoint vep, struct isp_bus_cfg *buscfg)
{
- struct isp_bus_cfg *buscfg;
- struct v4l2_of_endpoint vep;
- int ret;
-
- isd->bus = devm_kzalloc(dev, sizeof(*isd->bus), GFP_KERNEL);
- if (!isd->bus)
- return -ENOMEM;
-
- buscfg = isd->bus;
-
- ret = v4l2_of_parse_endpoint(node, &vep);
- if (ret)
- return ret;
-
- dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
- vep.base.port);
-
switch (vep.base.port) {
case ISP_OF_PHY_PARALLEL:
buscfg->interface = ISP_INTERFACE_PARALLEL;
@@ -2147,10 +2165,35 @@ static int isp_of_parse_node_endpoint(struct device *dev,
break;
default:
+ return -1;
+ }
+ return 0;
+}
+
+static int isp_of_parse_node_endpoint(struct device *dev,
+ struct device_node *node,
+ struct isp_async_subdev *isd)
+{
+ struct isp_bus_cfg *buscfg;
+ struct v4l2_of_endpoint vep;
+ int ret;
+
+ isd->bus = devm_kzalloc(dev, sizeof(*isd->bus), GFP_KERNEL);
+ if (!isd->bus)
+ return -ENOMEM;
+
+ buscfg = isd->bus;
+
+ ret = v4l2_of_parse_endpoint(node, &vep);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
+ vep.base.port);
+
+ if (isp_endpoint_to_buscfg(dev, vep, buscfg))
dev_warn(dev, "%s: invalid interface %u\n", node->full_name,
vep.base.port);
- break;
- }
return 0;
}
diff --git a/drivers/media/platform/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c
index 2d1463a..a6763b3 100644
--- a/drivers/media/platform/omap3isp/ispccp2.c
+++ b/drivers/media/platform/omap3isp/ispccp2.c
@@ -23,6 +23,8 @@
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
+#include <media/v4l2-of.h>
+
#include "isp.h"
#include "ispreg.h"
#include "ispccp2.h"
@@ -169,6 +171,7 @@ static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
sensor = media_entity_to_v4l2_subdev(pad->entity);
+ /* Struct isp_bus_cfg has union inside */
buscfg = &((struct isp_bus_cfg *)sensor->host_priv)->bus.ccp2;
@@ -369,6 +372,9 @@ static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
}
+void __isp_of_parse_node_csi1(struct device *dev,
+ struct isp_ccp2_cfg *buscfg,
+ struct v4l2_of_endpoint *vep);
/*
* ccp2_if_configure - Configure ccp2 with data from sensor
* @ccp2: Pointer to ISP CCP2 device
@@ -390,6 +396,21 @@ static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
sensor = media_entity_to_v4l2_subdev(pad->entity);
buscfg = sensor->host_priv;
+ {
+ struct v4l2_subdev *subdev2;
+ subdev2 = media_entity_to_v4l2_subdev(pad->entity);
+ struct v4l2_of_endpoint vep;
+
+ printk("if_configure...\n");
+ printk("2: %p\n", subdev2);
+ ret = v4l2_subdev_call(subdev2, video, g_endpoint_config, &vep);
+ if (ret == 0) {
+ printk("Success: have configuration\n");
+ __isp_of_parse_node_csi1(NULL, &buscfg->bus.ccp2, &vep);
+ printk("Configured ok?\n");
+ }
+ }
+
ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
if (ret < 0)
return ret;
diff --git a/drivers/media/platform/video-bus-switch.c b/drivers/media/platform/video-bus-switch.c
index 1a5d944..3a2d442 100644
--- a/drivers/media/platform/video-bus-switch.c
+++ b/drivers/media/platform/video-bus-switch.c
@@ -247,12 +247,21 @@ static int vbs_s_stream(struct v4l2_subdev *sd, int enable)
{
struct v4l2_subdev *subdev = vbs_get_remote_subdev(sd);
+
+
if (IS_ERR(subdev))
return PTR_ERR(subdev);
return v4l2_subdev_call(subdev, video, s_stream, enable);
}
+static int vbs_g_endpoint_config(struct v4l2_subdev *sd, struct isp_bus_cfg *cfg)
+{
+ printk("vbs_g_endpoint_config...\n");
+ return 0;
+}
+
+
static const struct v4l2_subdev_internal_ops vbs_internal_ops = {
.registered = &vbs_registered,
};
@@ -265,6 +274,7 @@ static const struct media_entity_operations vbs_media_ops = {
/* subdev video operations */
static const struct v4l2_subdev_video_ops vbs_video_ops = {
.s_stream = vbs_s_stream,
+ .g_endpoint_config = vbs_g_endpoint_config,
};
static const struct v4l2_subdev_ops vbs_ops = {
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index cf778c5..30457b0 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -415,6 +415,8 @@ struct v4l2_subdev_video_ops {
const struct v4l2_mbus_config *cfg);
int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
unsigned int *size);
+ int (*g_endpoint_config)(struct v4l2_subdev *sd,
+ struct v4l2_of_endpoint *cfg);
};
/**
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next prev parent reply other threads:[~2016-12-23 11:42 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-23 20:03 [PATCH v4] media: Driver for Toshiba et8ek8 5MP sensor Pavel Machek
2016-10-23 20:19 ` Sakari Ailus
2016-10-23 20:33 ` Pavel Machek
2016-10-31 22:54 ` Sakari Ailus
2016-11-01 6:36 ` Ivaylo Dimitrov
2016-11-01 20:11 ` Sakari Ailus
2016-11-01 22:14 ` Ivaylo Dimitrov
2016-11-02 8:15 ` Pavel Machek
2016-11-02 8:16 ` Ivaylo Dimitrov
2016-11-01 15:39 ` Pavel Machek
2016-11-01 20:08 ` Sakari Ailus
2016-11-03 8:14 ` Pavel Machek
2016-11-03 22:48 ` Sebastian Reichel
2016-11-03 23:05 ` Sakari Ailus
2016-11-03 23:40 ` Ivaylo Dimitrov
2016-11-04 0:05 ` Sebastian Reichel
2016-11-14 21:58 ` Sakari Ailus
2016-11-15 0:53 ` Sebastian Reichel
2016-11-15 10:54 ` Pavel Machek
2016-11-15 22:55 ` Sakari Ailus
2016-10-23 20:40 ` Pavel Machek
2016-10-31 22:58 ` Sakari Ailus
2016-11-02 0:45 ` Laurent Pinchart
2016-10-23 20:47 ` Pavel Machek
2016-12-13 21:05 ` Pavel Machek
2016-12-18 21:56 ` Sakari Ailus
2016-11-19 23:29 ` Sakari Ailus
2016-11-20 10:02 ` Pavel Machek
2016-11-20 15:20 ` Pavel Machek
2016-11-20 15:21 ` Pavel Machek
2016-11-20 15:31 ` Pavel Machek
2016-12-14 12:24 ` [PATCH v5] " Pavel Machek
2016-12-14 13:03 ` Pali Rohár
2016-12-14 15:52 ` Ivaylo Dimitrov
2016-12-14 20:12 ` Pavel Machek
2016-12-14 22:07 ` Pali Rohár
2016-12-14 22:35 ` Pavel Machek
2016-12-18 22:01 ` Sakari Ailus
2016-12-20 12:37 ` Pavel Machek
2016-12-20 14:01 ` Sakari Ailus
2016-12-20 22:42 ` Pavel Machek
2016-12-21 13:42 ` Sakari Ailus
2016-12-21 22:42 ` Pavel Machek
2016-12-21 23:29 ` Sakari Ailus
2016-12-22 9:34 ` Pavel Machek
2016-12-22 10:01 ` [PATCH v6] " Pavel Machek
2016-12-22 13:39 ` [RFC/PATCH] media: Add video bus switch Pavel Machek
2016-12-22 14:32 ` Sebastian Reichel
2016-12-22 20:53 ` Pavel Machek
2016-12-22 23:11 ` Sebastian Reichel
2016-12-22 22:42 ` Pavel Machek
2016-12-22 23:40 ` Sebastian Reichel
2016-12-23 11:42 ` Pavel Machek [this message]
2016-12-23 18:53 ` Ivaylo Dimitrov
2016-12-23 20:56 ` Pavel Machek
2016-12-24 14:26 ` Pavel Machek
2016-12-24 14:43 ` Pavel Machek
2016-12-24 15:20 ` [PATCH] " Pavel Machek
2016-12-24 18:35 ` kbuild test robot
2017-01-12 11:17 ` Pavel Machek
2017-02-03 22:25 ` Sakari Ailus
2017-02-05 22:16 ` Pavel Machek
2017-02-05 22:44 ` Sakari Ailus
2017-02-03 12:35 ` [PATCH] devicetree: " Pavel Machek
2017-02-03 12:35 ` Pavel Machek
2017-02-03 13:07 ` Sakari Ailus
2017-02-03 21:06 ` Pavel Machek
2017-02-03 21:34 ` Sakari Ailus
2017-02-04 21:56 ` Pavel Machek
2017-02-04 22:33 ` Sakari Ailus
2017-02-04 22:33 ` Sakari Ailus
2017-02-05 21:12 ` Pavel Machek
2017-02-05 23:40 ` Sebastian Reichel
2017-02-05 23:40 ` Sebastian Reichel
2017-02-06 9:37 ` [PATCH] media: add operation to get configuration of "the other side" of the link Pavel Machek
2017-12-19 15:43 ` Sakari Ailus
2017-12-20 17:54 ` [PATCH] devicetree: Add video bus switch Laurent Pinchart
2017-12-20 17:54 ` Laurent Pinchart
2017-12-21 9:05 ` Sakari Ailus
2017-12-21 9:05 ` Sakari Ailus
2017-12-21 16:36 ` Ivaylo Dimitrov
2017-12-21 16:36 ` Ivaylo Dimitrov
2017-12-22 9:24 ` Pavel Machek
2017-12-22 9:24 ` Pavel Machek
2017-02-03 13:32 ` Pali Rohár
2017-02-03 21:07 ` Pavel Machek
2017-02-03 21:07 ` Pavel Machek
2017-02-04 1:04 ` Sebastian Reichel
2017-02-04 1:04 ` Sebastian Reichel
2017-02-08 21:36 ` Rob Herring
2017-02-08 22:30 ` Pavel Machek
2017-02-09 23:02 ` Rob Herring
2017-02-09 23:03 ` Rob Herring
[not found] ` <CAL_JsqLfbAxBbXOyK0QOCc=wPe6=a+qyrAwtdbt3DtspK6oiaw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-02-10 19:54 ` Pavel Machek
2017-02-10 19:54 ` Pavel Machek
2017-02-10 22:17 ` Sakari Ailus
2017-02-10 22:17 ` Sakari Ailus
[not found] ` <20170210221742.GI13854-S+BSfZ9RZZmRSg0ZkenSGLdO1Tsj/99ntUK59QYPAWc@public.gmane.org>
2017-02-13 9:54 ` Pavel Machek
2017-02-13 9:54 ` Pavel Machek
2017-02-13 10:20 ` Sakari Ailus
2017-02-13 10:20 ` Sakari Ailus
2017-03-02 8:54 ` Pavel Machek
2017-02-08 22:34 ` Pavel Machek
2017-02-09 22:58 ` Rob Herring
[not found] ` <CAL_JsqK2RHLoLc_ikHzP2B5_Lof2g9NG+zvamGe4o1ko1ggGQA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-02-10 21:17 ` Pavel Machek
2017-02-10 21:17 ` Pavel Machek
2016-12-27 9:26 ` [PATCH v6] media: Driver for Toshiba et8ek8 5MP sensor Sakari Ailus
2016-12-27 20:45 ` Pavel Machek
2016-12-27 20:59 ` [PATCH] mark myself as mainainer for camera on N900 Pavel Machek
2016-12-27 23:57 ` Sebastian Reichel
2017-01-25 13:48 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161223114237.GA5879@amd \
--to=pavel@ucw.cz \
--cc=galak@codeaurora.org \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
--cc=pali.rohar@gmail.com \
--cc=sakari.ailus@iki.fi \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.