From: Andrew Lunn <andrew@lunn.ch>
To: Murali Karicheri <m-karicheri2@ti.com>
Cc: netdev@vger.kernel.org, "Kwok, WingMan" <w-kwok2@ti.com>
Subject: Re: Marvell Phy (1510) issue since v4.7 kernel
Date: Mon, 9 Jan 2017 23:56:41 +0100 [thread overview]
Message-ID: <20170109225641.GB22820@lunn.ch> (raw)
In-Reply-To: <587410EF.5090607@ti.com>
On Mon, Jan 09, 2017 at 05:38:39PM -0500, Murali Karicheri wrote:
> Hello Charles-Antoine, Andrew,
>
> We have recently upgraded our kernel to v4.9 and started seeing an issue
> on our Keystone EVMs (K2E/L) that uses Marvel Phy 1510. The issue is that
> when we do a reboot command from the Linux console or do a SoC reset,
> the DHCP times out at U-Boot due to Phy auto negotiation failure. This works
> fine when the board is power cycled.
I've seen similar before. What version of kernel are you upgrading
from?
The problem i've had is that on shutdown/reboot, linux powers the PHYs
off. The uboot i have does not power them on again. Clearly a uboot
issue, it should not assume the PHYs are powered on.
I work around this with a uboot command:
mii write 1 0 0x3100
where the PHY is at address 1 on the bus. This writes to register 0,
and the import bit which needs setting to 0 is bit 11.
If mii read shows bit 11 is set, you know there uboot did not power up
the PHY.
Andrew
next prev parent reply other threads:[~2017-01-09 22:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-09 22:38 Marvell Phy (1510) issue since v4.7 kernel Murali Karicheri
2017-01-09 22:56 ` Andrew Lunn [this message]
2017-01-09 23:48 ` Kwok, WingMan
2017-01-09 23:55 ` Andrew Lunn
2017-01-10 1:37 ` Kwok, WingMan
2017-01-10 1:53 ` Andrew Lunn
2017-01-11 22:18 ` Kwok, WingMan
2017-01-11 22:27 ` Andrew Lunn
2017-01-11 22:32 ` Kwok, WingMan
2017-01-11 22:41 ` Kwok, WingMan
2017-01-11 22:59 ` Andrew Lunn
2017-01-11 23:09 ` Kwok, WingMan
2017-01-11 23:22 ` Andrew Lunn
2017-01-12 0:31 ` Kwok, WingMan
2017-01-12 1:06 ` Andrew Lunn
2017-01-12 21:31 ` Kwok, WingMan
2017-01-12 21:41 ` Russell King - ARM Linux
2017-01-12 22:40 ` Kwok, WingMan
2017-01-12 21:49 ` Andrew Lunn
2017-01-12 22:31 ` Russell King - ARM Linux
2017-01-12 22:49 ` Kwok, WingMan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170109225641.GB22820@lunn.ch \
--to=andrew@lunn.ch \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=w-kwok2@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.