All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Cristina Ciocan <cristina.ciocan@intel.com>
Subject: [PATCH v1 1/1] pinctrl: baytrail: Rectify debounce support
Date: Tue, 10 Jan 2017 16:03:19 +0200	[thread overview]
Message-ID: <20170110140319.26185-1-andriy.shevchenko@linux.intel.com> (raw)

The commit 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
implements debounce for Baytrail pin control, but seems wasn't tested properly.

Rectify implementation here.

Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
Cc: Cristina Ciocan <cristina.ciocan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 71bbeb9321ba..079015385fd8 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1092,6 +1092,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 	enum pin_config_param param = pinconf_to_config_param(*config);
 	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
 	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG);
 	unsigned long flags;
 	u32 conf, pull, val, debounce;
 	u16 arg = 0;
@@ -1128,7 +1129,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 			return -EINVAL;
 
 		raw_spin_lock_irqsave(&vg->lock, flags);
-		debounce = readl(byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG));
+		debounce = readl(db_reg);
 		raw_spin_unlock_irqrestore(&vg->lock, flags);
 
 		switch (debounce & BYT_DEBOUNCE_PULSE_MASK) {
@@ -1176,6 +1177,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	unsigned int param, arg;
 	void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
 	void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG);
+	void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG);
 	unsigned long flags;
 	u32 conf, val, debounce;
 	int i, ret = 0;
@@ -1238,36 +1240,40 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 
 			break;
 		case PIN_CONFIG_INPUT_DEBOUNCE:
-			debounce = readl(byt_gpio_reg(vg, offset,
-						      BYT_DEBOUNCE_REG));
-			conf &= ~BYT_DEBOUNCE_PULSE_MASK;
+			debounce = readl(db_reg);
+			debounce &= ~BYT_DEBOUNCE_PULSE_MASK;
 
 			switch (arg) {
+			case 0:
+				conf &= BYT_DEBOUNCE_EN;
+				break;
 			case 375:
-				conf |= BYT_DEBOUNCE_PULSE_375US;
+				debounce |= BYT_DEBOUNCE_PULSE_375US;
 				break;
 			case 750:
-				conf |= BYT_DEBOUNCE_PULSE_750US;
+				debounce |= BYT_DEBOUNCE_PULSE_750US;
 				break;
 			case 1500:
-				conf |= BYT_DEBOUNCE_PULSE_1500US;
+				debounce |= BYT_DEBOUNCE_PULSE_1500US;
 				break;
 			case 3000:
-				conf |= BYT_DEBOUNCE_PULSE_3MS;
+				debounce |= BYT_DEBOUNCE_PULSE_3MS;
 				break;
 			case 6000:
-				conf |= BYT_DEBOUNCE_PULSE_6MS;
+				debounce |= BYT_DEBOUNCE_PULSE_6MS;
 				break;
 			case 12000:
-				conf |= BYT_DEBOUNCE_PULSE_12MS;
+				debounce |= BYT_DEBOUNCE_PULSE_12MS;
 				break;
 			case 24000:
-				conf |= BYT_DEBOUNCE_PULSE_24MS;
+				debounce |= BYT_DEBOUNCE_PULSE_24MS;
 				break;
 			default:
 				ret = -EINVAL;
 			}
 
+			if (!ret)
+				writel(debounce, db_reg);
 			break;
 		default:
 			ret = -ENOTSUPP;
-- 
2.11.0


             reply	other threads:[~2017-01-10 14:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-10 14:03 Andy Shevchenko [this message]
2017-01-10 14:12 ` [PATCH v1 1/1] pinctrl: baytrail: Rectify debounce support Mika Westerberg
2017-01-10 14:35   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170110140319.26185-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=cristina.ciocan@intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.