All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Lukas Wunner <lukas@wunner.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org,
	Andreas Noever <andreas.noever@gmail.com>,
	linux-pci@vger.kernel.org, linux-pm@vger.kernel.org,
	Chen Yu <yu.c.chen@intel.com>,
	Tomas Winkler <tomas.winkler@intel.com>,
	Amir Levy <amir.jer.levy@intel.com>,
	Bjorn Helgaas <helgaas@kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Subject: Re: [PATCH v4 3/8] PCI: Don't block runtime PM for Thunderbolt host hotplug ports
Date: Wed, 11 Jan 2017 12:02:10 +0200	[thread overview]
Message-ID: <20170111100210.GL2330@lahna.fi.intel.com> (raw)
In-Reply-To: <89e0512762e0062ad1f1884ebfaaf71e3b731237.1483806825.git.lukas@wunner.de>

On Sun, Jan 08, 2017 at 09:41:45AM +0100, Lukas Wunner wrote:
> Hotplug ports generally block their parents from suspending to D3hot as
> otherwise their interrupts couldn't be delivered.
> 
> An exception are Thunderbolt host controllers:  They have a separate
> GPIO pin to side-band signal plug events even if the controller is
> powered down or its parent ports are suspended to D3.  They can be told
> apart from Thunderbolt controllers in attached devices by checking if
> they're situated below a non-Thunderbolt device (typically a root port,
> or the downstream port of a PCIe switch in the case of the MacPro6,1).
> 
> To enable runtime PM for Thunderbolt on the Mac, the downstream bridges
> of a host controller must not block runtime PM on the upstream bridge as
> power to the chip is only cut once the upstream bridge has suspended.
> Amend the condition in pci_dev_check_d3cold() accordingly.
> 
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Cc: Andreas Noever <andreas.noever@gmail.com>
> Cc: Tomas Winkler <tomas.winkler@intel.com>
> Cc: Amir Levy <amir.jer.levy@intel.com>
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
> ---
>  drivers/pci/pci.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 8ed098d..0b03fe7 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2271,6 +2271,7 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
>  
>  static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
>  {
> +	struct pci_dev *parent, *grandparent;
>  	bool *d3cold_ok = data;
>  
>  	if (/* The device needs to be allowed to go D3cold ... */
> @@ -2284,7 +2285,17 @@ static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
>  	    !pci_power_manageable(dev) ||
>  
>  	    /* Hotplug interrupts cannot be delivered if the link is down. */
> -	    dev->is_hotplug_bridge)
> +	    (dev->is_hotplug_bridge &&
> +
> +		/*
> +		 * Exception:  Thunderbolt host controllers have a pin to
> +		 * side-band signal plug events.  Their hotplug ports are
> +		 * recognizable by having a non-Thunderbolt device as
> +		 * grandparent.
> +		 */
> +		!(dev->is_thunderbolt && (parent = pci_upstream_bridge(dev)) &&
> +				 (grandparent = pci_upstream_bridge(parent)) &&
> +						!grandparent->is_thunderbolt)))

Can you move this to its own helper function?

>  
>  		*d3cold_ok = false;
>  
> -- 
> 2.11.0

  reply	other threads:[~2017-01-11 10:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-08  8:41 [PATCH v4 0/8] Runtime PM for Thunderbolt on Macs Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 6/8] PM / sleep: Define constant for direct_complete Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 8/8] thunderbolt: Runtime suspend NHI when idle Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 5/8] PM: Make requirements of dev_pm_domain_set() more precise Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 2/8] PCI: Allow runtime PM on Thunderbolt ports Lukas Wunner
2017-01-11  9:54   ` Mika Westerberg
2017-01-08  8:41 ` [PATCH v4 3/8] PCI: Don't block runtime PM for Thunderbolt host hotplug ports Lukas Wunner
2017-01-11 10:02   ` Mika Westerberg [this message]
2017-01-12  1:47     ` Lukas Wunner
2017-01-12  9:02       ` Mika Westerberg
2017-01-15  9:36         ` Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 4/8] Revert "PM / Runtime: Remove the exported function pm_children_suspended()" Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 7/8] thunderbolt: Power down controller when idle Lukas Wunner
2017-01-08  8:41 ` [PATCH v4 1/8] PCI: Recognize Thunderbolt devices Lukas Wunner
2017-01-08 10:23   ` Winkler, Tomas
2017-01-08 10:23     ` Winkler, Tomas
2017-01-08 13:47     ` Lukas Wunner
2017-01-11 10:01       ` Winkler, Tomas
2017-01-11 10:01         ` Winkler, Tomas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170111100210.GL2330@lahna.fi.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=amir.jer.levy@intel.com \
    --cc=andreas.noever@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=rafael.j.wysocki@intel.com \
    --cc=tomas.winkler@intel.com \
    --cc=yu.c.chen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.