[U-Boot] [PATCH] serial, ns16550: bugfix: ns16550 fifo not enabled

[Tom Rini <trini@konsulko.com>]

On Wed, Jan 11, 2017 at 06:38:22AM +0100, Heiko Schocher wrote:
> Hello Tom,
> 
> Am 10.01.2017 um 17:40 schrieb Tom Rini:
> >On Tue, Jan 10, 2017 at 08:08:51AM +0100, Heiko Schocher wrote:
> >>commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor"
> >>breaks u-boot commandline working with long commands
> >>sending to the board.
> >>
> >>Since the above patch, you have to setup the fcr register.
> >>
> >>For board/archs which enable OF_PLATDATA, the new field
> >>fcr in struct ns16550_platdata is not filled with a
> >>default value ...
> >>
> >>This leads in not setting up the uarts fifo, which ends
> >>in problems, when you send long commands to u-boots
> >>commandline.
> >>
> >>Detected this issue with automated tbot tests on am335x
> >>based shc board.
> >>
> >>The error does not popup, if you type commands. You need
> >>to copy&paste a long command to u-boots commandshell
> >>(or send a long command with tbot)
> >>
> >>Possible boards/plattforms with problems:
> >>./arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> >>./arch/arm/mach-tegra/board.c
> >>./board/isee/igep00x0/igep00x0.c
> >>./board/overo/overo.c
> >>./board/quipos/cairo/cairo.c
> >>./board/logicpd/omap3som/omap3logic.c
> >>./board/logicpd/zoom1/zoom1.c
> >>./board/timll/devkit8000/devkit8000.c
> >>./board/lg/sniper/sniper.c
> >>./board/ti/beagle/beagle.c
> >>./drivers/serial/serial_rockchip.c
> >>
> >>This patch fixes only:
> >>./arch/arm/mach-omap2/am33xx/board.c
> >>
> >>Signed-off-by: Heiko Schocher <hs@denx.de>
> >
> >Good find!  I didn't catch this in my setups as nothing in test.py is
> >currently long enough to trigger this apparently (I have both an am335x
> >evm and a beagleboard in my setup).  By inspection, the right fix for
> >all platforms would be to put the old default value in as this is what
> >was missed in the original patch from Marek.
> 
> The problems are boards/archs, which create "struct ns16550_platdata"
> on their own ... I added the original value for fcr in
> ./arch/arm/mach-omap2/am33xx/board.c
> 
> Do you mean, I should grep for all this places and
> fix them in my patch (without having the chance to test it) ?
> 
> Ok, seems a valid solution ... I try to do this today.

Yes, you've got it.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170111/bca21fcb/attachment.sig>