Re: Erros and warning using kernel 4.10-rc2

[Marcos Paulo de Souza <marcos.souza.org-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Hi Karol,

sorry for the delay.

On Mon, Jan 09, 2017 at 09:49:00AM +0100, Karol Herbst wrote:
> could you grab the vbios from /sys/kernel/debug/dri/1/vbios.rom and
> maybe also do a mmiotrace with the nvidia driver (using bumblebee or
> second X server by hand or so)?

here is my vbios file:
https://drive.google.com/open?id=0B_-jCMJSxUqBMXZobldiY2xIV00

about the later, I need to check how to do it, since I don't have any experience using bumblebee and/or different X configs..

But I can check how to do it in the next few days. Hope this can help to solve these issues!

Thanks,

> 
> thanks
> 
> 2017-01-08 19:22 GMT+01:00 Marcos Paulo de Souza <marcos.souza.org@gmail.com>:
> > Hi guys,
> >
> > I don't know if it is useful to just post some random kernel warnings/errors, but here they are:
> >
> > [marcos@xfiles ~]$ journalctl -b -p 3 | grep nouveau
> > Jan 08 15:37:05 xfiles kernel: nouveau 0000:04:00.0: volt: couldn't find speedo value, volting not possible
> > Jan 08 15:37:05 xfiles kernel: nouveau 0000:04:00.0: bus: MMIO write of ffff981f FAULT at 6013d4 [ IBUS ]
> > Jan 08 15:37:05 xfiles kernel: nouveau 0000:04:00.0: DRM: Pointer to TMDS table invalid
> > Jan 08 15:37:05 xfiles kernel: nouveau 0000:04:00.0: DRM: Pointer to flat panel table invalid
> >
> > In this first case, this message comes from nvkm/subdev/volt/gf100.c, and I haven't seen this message in 4.8 for example (using fedora 25 kernel at least)
> >
> > The second one already appears on 4.8 as well, and I think it appears in function gf100_bus_intr of nvkm/subdev/bus/gf100.c
> >
> > And other two ones are already appearing in in my laptop for quite some time also, and they came from nouveau_bios.c.
> >
> > This is my nvidia board:
> > 04:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)
> >         Subsystem: ASUSTeK Computer Inc. GeForce GT 720M
> >         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> >         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >         Latency: 0, Cache Line Size: 64 bytes
> >         Interrupt: pin A routed to IRQ 43
> >         Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
> >         Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
> >         Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
> >         Region 5: I/O ports at d000 [size=128]
> >         Expansion ROM at f7000000 [disabled] [size=512K]
> >         Capabilities: [60] Power Management version 3
> >                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> >         Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >                 Address: 00000000fee0f00c  Data: 41d1
> >         Capabilities: [78] Express (v2) Endpoint, MSI 00
> >                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
> >                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W
> >                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> >                         RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> >                         MaxPayload 128 bytes, MaxReadReq 512 bytes
> >                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> >                 LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
> >                         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
> >                 LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- CommClk+
> >                         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> >                 LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> >                 DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
> >                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> >                 LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> >                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> >                          Compliance De-emphasis: -6dB
> >                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> >                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> >         Capabilities: [b4] Vendor Specific Information: Len=14 <?>
> >         Kernel driver in use: nouveau
> >         Kernel modules: nouveau
> >
> > Please, let me know if this information is useful and/or you need more tests or different config to solve these ones.
> >
> > Thanks!
> > _______________________________________________
> > Nouveau mailing list
> > Nouveau@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/nouveau
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau