From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 4.4.42
Date: Thu, 12 Jan 2017 11:36:33 +0100 [thread overview]
Message-ID: <20170112103633.GB21745@kroah.com> (raw)
In-Reply-To: <20170112103627.GA21745@kroah.com>
diff --git a/Makefile b/Makefile
index 855e71066174..b8a90f9a463d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 4
-SUBLEVEL = 41
+SUBLEVEL = 42
EXTRAVERSION =
NAME = Blurry Fish Butt
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a9977d6ee81a..169653586a9f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1023,7 +1023,7 @@
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&mp_clk>,
+ clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
#clock-cells = <1>;
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index 593da7ffb449..679c589c4828 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -87,8 +87,13 @@ static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
u32 *rki = ctx->key_enc + (i * kwords);
u32 *rko = rki + kwords;
+#ifndef CONFIG_CPU_BIG_ENDIAN
rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8);
rko[0] = rko[0] ^ rki[0] ^ rcon[i];
+#else
+ rko[0] = rol32(ce_aes_sub(rki[kwords - 1]), 8);
+ rko[0] = rko[0] ^ rki[0] ^ (rcon[i] << 24);
+#endif
rko[1] = rko[0] ^ rki[1];
rko[2] = rko[1] ^ rki[2];
rko[3] = rko[2] ^ rki[3];
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 676997895e13..f5f81a107309 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -298,6 +298,16 @@ static struct clk emac_clk = {
.gpsc = 1,
};
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+ .name = "mdio",
+ .parent = &emac_clk,
+};
+
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &pll0_sysclk2,
@@ -462,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
- CLK("davinci_mdio.0", "fck", &emac_clk),
+ CLK("davinci_mdio.0", "fck", &mdio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
diff --git a/arch/arm64/crypto/aes-ce-ccm-core.S b/arch/arm64/crypto/aes-ce-ccm-core.S
index a2a7fbcacc14..3363560c79b7 100644
--- a/arch/arm64/crypto/aes-ce-ccm-core.S
+++ b/arch/arm64/crypto/aes-ce-ccm-core.S
@@ -9,6 +9,7 @@
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
.text
.arch armv8-a+crypto
@@ -19,7 +20,7 @@
*/
ENTRY(ce_aes_ccm_auth_data)
ldr w8, [x3] /* leftover from prev round? */
- ld1 {v0.2d}, [x0] /* load mac */
+ ld1 {v0.16b}, [x0] /* load mac */
cbz w8, 1f
sub w8, w8, #16
eor v1.16b, v1.16b, v1.16b
@@ -31,7 +32,7 @@ ENTRY(ce_aes_ccm_auth_data)
beq 8f /* out of input? */
cbnz w8, 0b
eor v0.16b, v0.16b, v1.16b
-1: ld1 {v3.2d}, [x4] /* load first round key */
+1: ld1 {v3.16b}, [x4] /* load first round key */
prfm pldl1strm, [x1]
cmp w5, #12 /* which key size? */
add x6, x4, #16
@@ -41,17 +42,17 @@ ENTRY(ce_aes_ccm_auth_data)
mov v5.16b, v3.16b
b 4f
2: mov v4.16b, v3.16b
- ld1 {v5.2d}, [x6], #16 /* load 2nd round key */
+ ld1 {v5.16b}, [x6], #16 /* load 2nd round key */
3: aese v0.16b, v4.16b
aesmc v0.16b, v0.16b
-4: ld1 {v3.2d}, [x6], #16 /* load next round key */
+4: ld1 {v3.16b}, [x6], #16 /* load next round key */
aese v0.16b, v5.16b
aesmc v0.16b, v0.16b
-5: ld1 {v4.2d}, [x6], #16 /* load next round key */
+5: ld1 {v4.16b}, [x6], #16 /* load next round key */
subs w7, w7, #3
aese v0.16b, v3.16b
aesmc v0.16b, v0.16b
- ld1 {v5.2d}, [x6], #16 /* load next round key */
+ ld1 {v5.16b}, [x6], #16 /* load next round key */
bpl 3b
aese v0.16b, v4.16b
subs w2, w2, #16 /* last data? */
@@ -60,7 +61,7 @@ ENTRY(ce_aes_ccm_auth_data)
ld1 {v1.16b}, [x1], #16 /* load next input block */
eor v0.16b, v0.16b, v1.16b /* xor with mac */
bne 1b
-6: st1 {v0.2d}, [x0] /* store mac */
+6: st1 {v0.16b}, [x0] /* store mac */
beq 10f
adds w2, w2, #16
beq 10f
@@ -79,7 +80,7 @@ ENTRY(ce_aes_ccm_auth_data)
adds w7, w7, #1
bne 9b
eor v0.16b, v0.16b, v1.16b
- st1 {v0.2d}, [x0]
+ st1 {v0.16b}, [x0]
10: str w8, [x3]
ret
ENDPROC(ce_aes_ccm_auth_data)
@@ -89,27 +90,27 @@ ENDPROC(ce_aes_ccm_auth_data)
* u32 rounds);
*/
ENTRY(ce_aes_ccm_final)
- ld1 {v3.2d}, [x2], #16 /* load first round key */
- ld1 {v0.2d}, [x0] /* load mac */
+ ld1 {v3.16b}, [x2], #16 /* load first round key */
+ ld1 {v0.16b}, [x0] /* load mac */
cmp w3, #12 /* which key size? */
sub w3, w3, #2 /* modified # of rounds */
- ld1 {v1.2d}, [x1] /* load 1st ctriv */
+ ld1 {v1.16b}, [x1] /* load 1st ctriv */
bmi 0f
bne 3f
mov v5.16b, v3.16b
b 2f
0: mov v4.16b, v3.16b
-1: ld1 {v5.2d}, [x2], #16 /* load next round key */
+1: ld1 {v5.16b}, [x2], #16 /* load next round key */
aese v0.16b, v4.16b
aesmc v0.16b, v0.16b
aese v1.16b, v4.16b
aesmc v1.16b, v1.16b
-2: ld1 {v3.2d}, [x2], #16 /* load next round key */
+2: ld1 {v3.16b}, [x2], #16 /* load next round key */
aese v0.16b, v5.16b
aesmc v0.16b, v0.16b
aese v1.16b, v5.16b
aesmc v1.16b, v1.16b
-3: ld1 {v4.2d}, [x2], #16 /* load next round key */
+3: ld1 {v4.16b}, [x2], #16 /* load next round key */
subs w3, w3, #3
aese v0.16b, v3.16b
aesmc v0.16b, v0.16b
@@ -120,47 +121,47 @@ ENTRY(ce_aes_ccm_final)
aese v1.16b, v4.16b
/* final round key cancels out */
eor v0.16b, v0.16b, v1.16b /* en-/decrypt the mac */
- st1 {v0.2d}, [x0] /* store result */
+ st1 {v0.16b}, [x0] /* store result */
ret
ENDPROC(ce_aes_ccm_final)
.macro aes_ccm_do_crypt,enc
ldr x8, [x6, #8] /* load lower ctr */
- ld1 {v0.2d}, [x5] /* load mac */
- rev x8, x8 /* keep swabbed ctr in reg */
+ ld1 {v0.16b}, [x5] /* load mac */
+CPU_LE( rev x8, x8 ) /* keep swabbed ctr in reg */
0: /* outer loop */
- ld1 {v1.1d}, [x6] /* load upper ctr */
+ ld1 {v1.8b}, [x6] /* load upper ctr */
prfm pldl1strm, [x1]
add x8, x8, #1
rev x9, x8
cmp w4, #12 /* which key size? */
sub w7, w4, #2 /* get modified # of rounds */
ins v1.d[1], x9 /* no carry in lower ctr */
- ld1 {v3.2d}, [x3] /* load first round key */
+ ld1 {v3.16b}, [x3] /* load first round key */
add x10, x3, #16
bmi 1f
bne 4f
mov v5.16b, v3.16b
b 3f
1: mov v4.16b, v3.16b
- ld1 {v5.2d}, [x10], #16 /* load 2nd round key */
+ ld1 {v5.16b}, [x10], #16 /* load 2nd round key */
2: /* inner loop: 3 rounds, 2x interleaved */
aese v0.16b, v4.16b
aesmc v0.16b, v0.16b
aese v1.16b, v4.16b
aesmc v1.16b, v1.16b
-3: ld1 {v3.2d}, [x10], #16 /* load next round key */
+3: ld1 {v3.16b}, [x10], #16 /* load next round key */
aese v0.16b, v5.16b
aesmc v0.16b, v0.16b
aese v1.16b, v5.16b
aesmc v1.16b, v1.16b
-4: ld1 {v4.2d}, [x10], #16 /* load next round key */
+4: ld1 {v4.16b}, [x10], #16 /* load next round key */
subs w7, w7, #3
aese v0.16b, v3.16b
aesmc v0.16b, v0.16b
aese v1.16b, v3.16b
aesmc v1.16b, v1.16b
- ld1 {v5.2d}, [x10], #16 /* load next round key */
+ ld1 {v5.16b}, [x10], #16 /* load next round key */
bpl 2b
aese v0.16b, v4.16b
aese v1.16b, v4.16b
@@ -177,14 +178,14 @@ ENDPROC(ce_aes_ccm_final)
eor v0.16b, v0.16b, v2.16b /* xor mac with pt ^ rk[last] */
st1 {v1.16b}, [x0], #16 /* write output block */
bne 0b
- rev x8, x8
- st1 {v0.2d}, [x5] /* store mac */
+CPU_LE( rev x8, x8 )
+ st1 {v0.16b}, [x5] /* store mac */
str x8, [x6, #8] /* store lsb end of ctr (BE) */
5: ret
6: eor v0.16b, v0.16b, v5.16b /* final round mac */
eor v1.16b, v1.16b, v5.16b /* final round enc */
- st1 {v0.2d}, [x5] /* store mac */
+ st1 {v0.16b}, [x5] /* store mac */
add w2, w2, #16 /* process partial tail block */
7: ldrb w9, [x1], #1 /* get 1 byte of input */
umov w6, v1.b[0] /* get top crypted ctr byte */
diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-cipher.c
index f7bd9bf0bbb3..50d9fe11d0c8 100644
--- a/arch/arm64/crypto/aes-ce-cipher.c
+++ b/arch/arm64/crypto/aes-ce-cipher.c
@@ -47,24 +47,24 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
kernel_neon_begin_partial(4);
__asm__(" ld1 {v0.16b}, %[in] ;"
- " ld1 {v1.2d}, [%[key]], #16 ;"
+ " ld1 {v1.16b}, [%[key]], #16 ;"
" cmp %w[rounds], #10 ;"
" bmi 0f ;"
" bne 3f ;"
" mov v3.16b, v1.16b ;"
" b 2f ;"
"0: mov v2.16b, v1.16b ;"
- " ld1 {v3.2d}, [%[key]], #16 ;"
+ " ld1 {v3.16b}, [%[key]], #16 ;"
"1: aese v0.16b, v2.16b ;"
" aesmc v0.16b, v0.16b ;"
- "2: ld1 {v1.2d}, [%[key]], #16 ;"
+ "2: ld1 {v1.16b}, [%[key]], #16 ;"
" aese v0.16b, v3.16b ;"
" aesmc v0.16b, v0.16b ;"
- "3: ld1 {v2.2d}, [%[key]], #16 ;"
+ "3: ld1 {v2.16b}, [%[key]], #16 ;"
" subs %w[rounds], %w[rounds], #3 ;"
" aese v0.16b, v1.16b ;"
" aesmc v0.16b, v0.16b ;"
- " ld1 {v3.2d}, [%[key]], #16 ;"
+ " ld1 {v3.16b}, [%[key]], #16 ;"
" bpl 1b ;"
" aese v0.16b, v2.16b ;"
" eor v0.16b, v0.16b, v3.16b ;"
@@ -92,24 +92,24 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
kernel_neon_begin_partial(4);
__asm__(" ld1 {v0.16b}, %[in] ;"
- " ld1 {v1.2d}, [%[key]], #16 ;"
+ " ld1 {v1.16b}, [%[key]], #16 ;"
" cmp %w[rounds], #10 ;"
" bmi 0f ;"
" bne 3f ;"
" mov v3.16b, v1.16b ;"
" b 2f ;"
"0: mov v2.16b, v1.16b ;"
- " ld1 {v3.2d}, [%[key]], #16 ;"
+ " ld1 {v3.16b}, [%[key]], #16 ;"
"1: aesd v0.16b, v2.16b ;"
" aesimc v0.16b, v0.16b ;"
- "2: ld1 {v1.2d}, [%[key]], #16 ;"
+ "2: ld1 {v1.16b}, [%[key]], #16 ;"
" aesd v0.16b, v3.16b ;"
" aesimc v0.16b, v0.16b ;"
- "3: ld1 {v2.2d}, [%[key]], #16 ;"
+ "3: ld1 {v2.16b}, [%[key]], #16 ;"
" subs %w[rounds], %w[rounds], #3 ;"
" aesd v0.16b, v1.16b ;"
" aesimc v0.16b, v0.16b ;"
- " ld1 {v3.2d}, [%[key]], #16 ;"
+ " ld1 {v3.16b}, [%[key]], #16 ;"
" bpl 1b ;"
" aesd v0.16b, v2.16b ;"
" eor v0.16b, v0.16b, v3.16b ;"
@@ -173,7 +173,12 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
u32 *rki = ctx->key_enc + (i * kwords);
u32 *rko = rki + kwords;
+#ifndef CONFIG_CPU_BIG_ENDIAN
rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
+#else
+ rko[0] = rol32(aes_sub(rki[kwords - 1]), 8) ^ (rcon[i] << 24) ^
+ rki[0];
+#endif
rko[1] = rko[0] ^ rki[1];
rko[2] = rko[1] ^ rki[2];
rko[3] = rko[2] ^ rki[3];
diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S
index 78f3cfe92c08..b46093d567e5 100644
--- a/arch/arm64/crypto/aes-ce.S
+++ b/arch/arm64/crypto/aes-ce.S
@@ -10,6 +10,7 @@
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#define AES_ENTRY(func) ENTRY(ce_ ## func)
#define AES_ENDPROC(func) ENDPROC(ce_ ## func)
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
index f6e372c528eb..c53dbeae79f2 100644
--- a/arch/arm64/crypto/aes-modes.S
+++ b/arch/arm64/crypto/aes-modes.S
@@ -386,7 +386,8 @@ AES_ENDPROC(aes_ctr_encrypt)
.endm
.Lxts_mul_x:
- .word 1, 0, 0x87, 0
+CPU_LE( .quad 1, 0x87 )
+CPU_BE( .quad 0x87, 1 )
AES_ENTRY(aes_xts_encrypt)
FRAME_PUSH
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
index b93170e1cc93..85f07ead7c5c 100644
--- a/arch/arm64/crypto/aes-neon.S
+++ b/arch/arm64/crypto/aes-neon.S
@@ -9,6 +9,7 @@
*/
#include <linux/linkage.h>
+#include <asm/assembler.h>
#define AES_ENTRY(func) ENTRY(neon_ ## func)
#define AES_ENDPROC(func) ENDPROC(neon_ ## func)
@@ -83,13 +84,13 @@
.endm
.macro do_block, enc, in, rounds, rk, rkp, i
- ld1 {v15.16b}, [\rk]
+ ld1 {v15.4s}, [\rk]
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in\().16b, \in\().16b, v15.16b /* ^round key */
tbl \in\().16b, {\in\().16b}, v13.16b /* ShiftRows */
sub_bytes \in
- ld1 {v15.16b}, [\rkp], #16
+ ld1 {v15.4s}, [\rkp], #16
subs \i, \i, #1
beq 2222f
.if \enc == 1
@@ -229,7 +230,7 @@
.endm
.macro do_block_2x, enc, in0, in1 rounds, rk, rkp, i
- ld1 {v15.16b}, [\rk]
+ ld1 {v15.4s}, [\rk]
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
@@ -237,7 +238,7 @@
sub_bytes_2x \in0, \in1
tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */
tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */
- ld1 {v15.16b}, [\rkp], #16
+ ld1 {v15.4s}, [\rkp], #16
subs \i, \i, #1
beq 2222f
.if \enc == 1
@@ -254,7 +255,7 @@
.endm
.macro do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i
- ld1 {v15.16b}, [\rk]
+ ld1 {v15.4s}, [\rk]
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
@@ -266,7 +267,7 @@
tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */
tbl \in2\().16b, {\in2\().16b}, v13.16b /* ShiftRows */
tbl \in3\().16b, {\in3\().16b}, v13.16b /* ShiftRows */
- ld1 {v15.16b}, [\rkp], #16
+ ld1 {v15.4s}, [\rkp], #16
subs \i, \i, #1
beq 2222f
.if \enc == 1
@@ -306,12 +307,16 @@
.text
.align 4
.LForward_ShiftRows:
- .byte 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3
- .byte 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb
+CPU_LE( .byte 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3 )
+CPU_LE( .byte 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb )
+CPU_BE( .byte 0xb, 0x6, 0x1, 0xc, 0x7, 0x2, 0xd, 0x8 )
+CPU_BE( .byte 0x3, 0xe, 0x9, 0x4, 0xf, 0xa, 0x5, 0x0 )
.LReverse_ShiftRows:
- .byte 0x0, 0xd, 0xa, 0x7, 0x4, 0x1, 0xe, 0xb
- .byte 0x8, 0x5, 0x2, 0xf, 0xc, 0x9, 0x6, 0x3
+CPU_LE( .byte 0x0, 0xd, 0xa, 0x7, 0x4, 0x1, 0xe, 0xb )
+CPU_LE( .byte 0x8, 0x5, 0x2, 0xf, 0xc, 0x9, 0x6, 0x3 )
+CPU_BE( .byte 0x3, 0x6, 0x9, 0xc, 0xf, 0x2, 0x5, 0x8 )
+CPU_BE( .byte 0xb, 0xe, 0x1, 0x4, 0x7, 0xa, 0xd, 0x0 )
.LForward_Sbox:
.byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5
diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S
index dc457015884e..f0bb9f0b524f 100644
--- a/arch/arm64/crypto/ghash-ce-core.S
+++ b/arch/arm64/crypto/ghash-ce-core.S
@@ -29,8 +29,8 @@
* struct ghash_key const *k, const char *head)
*/
ENTRY(pmull_ghash_update)
- ld1 {SHASH.16b}, [x3]
- ld1 {XL.16b}, [x1]
+ ld1 {SHASH.2d}, [x3]
+ ld1 {XL.2d}, [x1]
movi MASK.16b, #0xe1
ext SHASH2.16b, SHASH.16b, SHASH.16b, #8
shl MASK.2d, MASK.2d, #57
@@ -74,6 +74,6 @@ CPU_LE( rev64 T1.16b, T1.16b )
cbnz w0, 0b
- st1 {XL.16b}, [x1]
+ st1 {XL.2d}, [x1]
ret
ENDPROC(pmull_ghash_update)
diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
index 033aae6d732a..c98e7e849f06 100644
--- a/arch/arm64/crypto/sha1-ce-core.S
+++ b/arch/arm64/crypto/sha1-ce-core.S
@@ -78,7 +78,7 @@ ENTRY(sha1_ce_transform)
ld1r {k3.4s}, [x6]
/* load state */
- ldr dga, [x0]
+ ld1 {dgav.4s}, [x0]
ldr dgb, [x0, #16]
/* load sha1_ce_state::finalize */
@@ -144,7 +144,7 @@ CPU_LE( rev32 v11.16b, v11.16b )
b 1b
/* store new state */
-3: str dga, [x0]
+3: st1 {dgav.4s}, [x0]
str dgb, [x0, #16]
ret
ENDPROC(sha1_ce_transform)
diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S
index 5df9d9d470ad..01cfee066837 100644
--- a/arch/arm64/crypto/sha2-ce-core.S
+++ b/arch/arm64/crypto/sha2-ce-core.S
@@ -85,7 +85,7 @@ ENTRY(sha2_ce_transform)
ld1 {v12.4s-v15.4s}, [x8]
/* load state */
- ldp dga, dgb, [x0]
+ ld1 {dgav.4s, dgbv.4s}, [x0]
/* load sha256_ce_state::finalize */
ldr w4, [x0, #:lo12:sha256_ce_offsetof_finalize]
@@ -148,6 +148,6 @@ CPU_LE( rev32 v19.16b, v19.16b )
b 1b
/* store new state */
-3: stp dga, dgb, [x0]
+3: st1 {dgav.4s, dgbv.4s}, [x0]
ret
ENDPROC(sha2_ce_transform)
diff --git a/arch/cris/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile
index 52bd0bd1dd22..d98edbb30a18 100644
--- a/arch/cris/boot/rescue/Makefile
+++ b/arch/cris/boot/rescue/Makefile
@@ -10,6 +10,9 @@
asflags-y += $(LINUXINCLUDE)
ccflags-y += -O2 $(LINUXINCLUDE)
+
+ifdef CONFIG_ETRAX_AXISFLASHMAP
+
arch-$(CONFIG_ETRAX_ARCH_V10) = v10
arch-$(CONFIG_ETRAX_ARCH_V32) = v32
@@ -28,6 +31,11 @@ $(obj)/rescue.bin: $(obj)/rescue.o FORCE
$(call if_changed,objcopy)
cp -p $(obj)/rescue.bin $(objtree)
+else
+$(obj)/rescue.bin:
+
+endif
+
$(obj)/testrescue.bin: $(obj)/testrescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
# Pad it to 784 bytes
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index e86b7499921a..a017b23ee4aa 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -324,8 +324,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
#endif
/* Invalidate the icache for these ranges */
- local_flush_icache_range((unsigned long)gebase,
- (unsigned long)gebase + ALIGN(size, PAGE_SIZE));
+ flush_icache_range((unsigned long)gebase,
+ (unsigned long)gebase + ALIGN(size, PAGE_SIZE));
/*
* Allocate comm page for guest kernel, a TLB will be reserved for
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index d750cc0dfe30..683a966b5b16 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -565,8 +565,10 @@ static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
prng_data->prngws.byte_counter += n;
prng_data->prngws.reseed_counter += n;
- if (copy_to_user(ubuf, prng_data->buf, chunk))
- return -EFAULT;
+ if (copy_to_user(ubuf, prng_data->buf, chunk)) {
+ ret = -EFAULT;
+ break;
+ }
nbytes -= chunk;
ret += chunk;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7429d481a311..b3c2ae7aa213 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2949,6 +2949,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
memset(&events->reserved, 0, sizeof(events->reserved));
}
+static void kvm_set_hflags(struct kvm_vcpu *vcpu, unsigned emul_flags);
+
static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events)
{
@@ -2981,10 +2983,13 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
vcpu->arch.apic->sipi_vector = events->sipi_vector;
if (events->flags & KVM_VCPUEVENT_VALID_SMM) {
+ u32 hflags = vcpu->arch.hflags;
if (events->smi.smm)
- vcpu->arch.hflags |= HF_SMM_MASK;
+ hflags |= HF_SMM_MASK;
else
- vcpu->arch.hflags &= ~HF_SMM_MASK;
+ hflags &= ~HF_SMM_MASK;
+ kvm_set_hflags(vcpu, hflags);
+
vcpu->arch.smi_pending = events->smi.pending;
if (events->smi.smm_inside_nmi)
vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 998fa6b23084..01ac5b1aeaeb 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -20,14 +20,22 @@ static inline void pm_runtime_early_init(struct device *dev)
extern void pm_runtime_init(struct device *dev);
extern void pm_runtime_remove(struct device *dev);
+#define WAKE_IRQ_DEDICATED_ALLOCATED BIT(0)
+#define WAKE_IRQ_DEDICATED_MANAGED BIT(1)
+#define WAKE_IRQ_DEDICATED_MASK (WAKE_IRQ_DEDICATED_ALLOCATED | \
+ WAKE_IRQ_DEDICATED_MANAGED)
+
struct wake_irq {
struct device *dev;
+ unsigned int status;
int irq;
- bool dedicated_irq:1;
};
extern void dev_pm_arm_wake_irq(struct wake_irq *wirq);
extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq);
+extern void dev_pm_enable_wake_irq_check(struct device *dev,
+ bool can_change_status);
+extern void dev_pm_disable_wake_irq_check(struct device *dev);
#ifdef CONFIG_PM_SLEEP
@@ -102,6 +110,15 @@ static inline void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
{
}
+static inline void dev_pm_enable_wake_irq_check(struct device *dev,
+ bool can_change_status)
+{
+}
+
+static inline void dev_pm_disable_wake_irq_check(struct device *dev)
+{
+}
+
#endif
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 9796a1a15ef6..3252429f96af 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -515,7 +515,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_suspend);
- dev_pm_enable_wake_irq(dev);
+ dev_pm_enable_wake_irq_check(dev, true);
retval = rpm_callback(callback, dev);
if (retval)
goto fail;
@@ -554,7 +554,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
return retval;
fail:
- dev_pm_disable_wake_irq(dev);
+ dev_pm_disable_wake_irq_check(dev);
__update_runtime_status(dev, RPM_ACTIVE);
dev->power.deferred_resume = false;
wake_up_all(&dev->power.wait_queue);
@@ -737,12 +737,12 @@ static int rpm_resume(struct device *dev, int rpmflags)
callback = RPM_GET_CALLBACK(dev, runtime_resume);
- dev_pm_disable_wake_irq(dev);
+ dev_pm_disable_wake_irq_check(dev);
retval = rpm_callback(callback, dev);
if (retval) {
__update_runtime_status(dev, RPM_SUSPENDED);
pm_runtime_cancel_pending(dev);
- dev_pm_enable_wake_irq(dev);
+ dev_pm_enable_wake_irq_check(dev, false);
} else {
no_callback:
__update_runtime_status(dev, RPM_ACTIVE);
diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index 0d77cd6fd8d1..404d94c6c8bc 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -110,8 +110,10 @@ void dev_pm_clear_wake_irq(struct device *dev)
dev->power.wakeirq = NULL;
spin_unlock_irqrestore(&dev->power.lock, flags);
- if (wirq->dedicated_irq)
+ if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED) {
free_irq(wirq->irq, wirq);
+ wirq->status &= ~WAKE_IRQ_DEDICATED_MASK;
+ }
kfree(wirq);
}
EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq);
@@ -179,7 +181,6 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
wirq->dev = dev;
wirq->irq = irq;
- wirq->dedicated_irq = true;
irq_set_status_flags(irq, IRQ_NOAUTOEN);
/*
@@ -195,6 +196,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
if (err)
goto err_free_irq;
+ wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED;
+
return err;
err_free_irq:
@@ -210,9 +213,9 @@ EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq);
* dev_pm_enable_wake_irq - Enable device wake-up interrupt
* @dev: Device
*
- * Called from the bus code or the device driver for
- * runtime_suspend() to enable the wake-up interrupt while
- * the device is running.
+ * Optionally called from the bus code or the device driver for
+ * runtime_resume() to override the PM runtime core managed wake-up
+ * interrupt handling to enable the wake-up interrupt.
*
* Note that for runtime_suspend()) the wake-up interrupts
* should be unconditionally enabled unlike for suspend()
@@ -222,7 +225,7 @@ void dev_pm_enable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
- if (wirq && wirq->dedicated_irq)
+ if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
enable_irq(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
@@ -231,20 +234,73 @@ EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
* dev_pm_disable_wake_irq - Disable device wake-up interrupt
* @dev: Device
*
- * Called from the bus code or the device driver for
- * runtime_resume() to disable the wake-up interrupt while
- * the device is running.
+ * Optionally called from the bus code or the device driver for
+ * runtime_suspend() to override the PM runtime core managed wake-up
+ * interrupt handling to disable the wake-up interrupt.
*/
void dev_pm_disable_wake_irq(struct device *dev)
{
struct wake_irq *wirq = dev->power.wakeirq;
- if (wirq && wirq->dedicated_irq)
+ if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
disable_irq_nosync(wirq->irq);
}
EXPORT_SYMBOL_GPL(dev_pm_disable_wake_irq);
/**
+ * dev_pm_enable_wake_irq_check - Checks and enables wake-up interrupt
+ * @dev: Device
+ * @can_change_status: Can change wake-up interrupt status
+ *
+ * Enables wakeirq conditionally. We need to enable wake-up interrupt
+ * lazily on the first rpm_suspend(). This is needed as the consumer device
+ * starts in RPM_SUSPENDED state, and the the first pm_runtime_get() would
+ * otherwise try to disable already disabled wakeirq. The wake-up interrupt
+ * starts disabled with IRQ_NOAUTOEN set.
+ *
+ * Should be only called from rpm_suspend() and rpm_resume() path.
+ * Caller must hold &dev->power.lock to change wirq->status
+ */
+void dev_pm_enable_wake_irq_check(struct device *dev,
+ bool can_change_status)
+{
+ struct wake_irq *wirq = dev->power.wakeirq;
+
+ if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+ return;
+
+ if (likely(wirq->status & WAKE_IRQ_DEDICATED_MANAGED)) {
+ goto enable;
+ } else if (can_change_status) {
+ wirq->status |= WAKE_IRQ_DEDICATED_MANAGED;
+ goto enable;
+ }
+
+ return;
+
+enable:
+ enable_irq(wirq->irq);
+}
+
+/**
+ * dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt
+ * @dev: Device
+ *
+ * Disables wake-up interrupt conditionally based on status.
+ * Should be only called from rpm_suspend() and rpm_resume() path.
+ */
+void dev_pm_disable_wake_irq_check(struct device *dev)
+{
+ struct wake_irq *wirq = dev->power.wakeirq;
+
+ if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+ return;
+
+ if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED)
+ disable_irq_nosync(wirq->irq);
+}
+
+/**
* dev_pm_arm_wake_irq - Arm device wake-up
* @wirq: Device wake-up interrupt
*
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c
index 43f9d15255f4..763aed2de893 100644
--- a/drivers/clk/clk-wm831x.c
+++ b/drivers/clk/clk-wm831x.c
@@ -247,7 +247,7 @@ static int wm831x_clkout_is_prepared(struct clk_hw *hw)
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
ret);
- return true;
+ return false;
}
return (ret & WM831X_CLKOUT_ENA) != 0;
diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index 6a964144a5b5..6a49ba2b9671 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -157,10 +157,8 @@ static void __init _mx31_clocks_init(unsigned long fref)
}
}
-int __init mx31_clocks_init(void)
+int __init mx31_clocks_init(unsigned long fref)
{
- u32 fref = 26000000; /* default */
-
_mx31_clocks_init(fref);
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index b5b9cb911111..04cec0da5d1e 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -146,6 +146,9 @@ static int radeon_cursor_move_locked(struct drm_crtc *crtc, int x, int y)
int xorigin = 0, yorigin = 0;
int w = radeon_crtc->cursor_width;
+ radeon_crtc->cursor_x = x;
+ radeon_crtc->cursor_y = y;
+
if (ASIC_IS_AVIVO(rdev)) {
/* avivo cursor are offset into the total surface */
x += crtc->x;
@@ -240,9 +243,6 @@ static int radeon_cursor_move_locked(struct drm_crtc *crtc, int x, int y)
yorigin * 256);
}
- radeon_crtc->cursor_x = x;
- radeon_crtc->cursor_y = y;
-
if (radeon_crtc->cursor_out_of_bounds) {
radeon_crtc->cursor_out_of_bounds = false;
if (radeon_crtc->cursor_bo)
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 12e851a5af48..46b4e35fd555 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -188,8 +188,8 @@ static struct amc6821_data *amc6821_update_device(struct device *dev)
!data->valid) {
for (i = 0; i < TEMP_IDX_LEN; i++)
- data->temp[i] = i2c_smbus_read_byte_data(client,
- temp_reg[i]);
+ data->temp[i] = (int8_t)i2c_smbus_read_byte_data(
+ client, temp_reg[i]);
data->stat1 = i2c_smbus_read_byte_data(client,
AMC6821_REG_STAT1);
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index edf550fc4eef..0043a4c02b85 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -166,7 +166,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
if (res)
return res;
- val = (val * 10 / 625) * 8;
+ val = (clamp_val(val, -128000, 128000) * 10 / 625) * 8;
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
index b96a2a9e4df7..628be9c95ff9 100644
--- a/drivers/hwmon/g762.c
+++ b/drivers/hwmon/g762.c
@@ -193,14 +193,17 @@ static inline unsigned int rpm_from_cnt(u8 cnt, u32 clk_freq, u16 p,
* Convert fan RPM value from sysfs into count value for fan controller
* register (FAN_SET_CNT).
*/
-static inline unsigned char cnt_from_rpm(u32 rpm, u32 clk_freq, u16 p,
+static inline unsigned char cnt_from_rpm(unsigned long rpm, u32 clk_freq, u16 p,
u8 clk_div, u8 gear_mult)
{
- if (!rpm) /* to stop the fan, set cnt to 255 */
+ unsigned long f1 = clk_freq * 30 * gear_mult;
+ unsigned long f2 = p * clk_div;
+
+ if (!rpm) /* to stop the fan, set cnt to 255 */
return 0xff;
- return clamp_val(((clk_freq * 30 * gear_mult) / (rpm * p * clk_div)),
- 0, 255);
+ rpm = clamp_val(rpm, f1 / (255 * f2), ULONG_MAX / f2);
+ return DIV_ROUND_CLOSEST(f1, rpm * f2);
}
/* helper to grab and cache data, at most one time per second */
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index 3ce33d244cc0..12b94b094c0d 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -259,13 +259,15 @@ static int nct7802_read_fan_min(struct nct7802_data *data, u8 reg_fan_low,
ret = 0;
else if (ret)
ret = DIV_ROUND_CLOSEST(1350000U, ret);
+ else
+ ret = 1350000U;
abort:
mutex_unlock(&data->access_lock);
return ret;
}
static int nct7802_write_fan_min(struct nct7802_data *data, u8 reg_fan_low,
- u8 reg_fan_high, unsigned int limit)
+ u8 reg_fan_high, unsigned long limit)
{
int err;
@@ -326,8 +328,8 @@ static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
int err;
+ voltage = clamp_val(voltage, 0, 0x3ff * nct7802_vmul[nr]);
voltage = DIV_ROUND_CLOSEST(voltage, nct7802_vmul[nr]);
- voltage = clamp_val(voltage, 0, 0x3ff);
mutex_lock(&data->access_lock);
err = regmap_write(data->regmap,
@@ -402,7 +404,7 @@ static ssize_t store_temp(struct device *dev, struct device_attribute *attr,
if (err < 0)
return err;
- val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
+ val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
err = regmap_write(data->regmap, nr, val & 0xff);
return err ? : count;
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 7e20567bc369..6827169c82d4 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -272,6 +272,7 @@ static const struct of_device_id scpi_of_match[] = {
{.compatible = "arm,scpi-sensors"},
{},
};
+MODULE_DEVICE_TABLE(of, scpi_of_match);
static struct platform_driver scpi_hwmon_platdrv = {
.driver = {
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 5975d76ce755..a0ef57483ebb 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -926,7 +926,7 @@ again:
next_tail = (tail + sizeof(*cmd)) % CMD_BUFFER_SIZE;
left = (head - next_tail) % CMD_BUFFER_SIZE;
- if (left <= 2) {
+ if (left <= 0x20) {
struct iommu_cmd sync_cmd;
volatile u64 sem = 0;
int ret;
diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
index 7caf2fa237f2..4831eb910fc7 100644
--- a/drivers/iommu/amd_iommu_v2.c
+++ b/drivers/iommu/amd_iommu_v2.c
@@ -809,8 +809,10 @@ int amd_iommu_init_device(struct pci_dev *pdev, int pasids)
goto out_free_domain;
group = iommu_group_get(&pdev->dev);
- if (!group)
+ if (!group) {
+ ret = -EINVAL;
goto out_free_domain;
+ }
ret = iommu_attach_group(dev_state->domain, group);
if (ret != 0)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 59e9abd3345e..9413b0726237 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1993,6 +1993,25 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
if (context_present(context))
goto out_unlock;
+ /*
+ * For kdump cases, old valid entries may be cached due to the
+ * in-flight DMA and copied pgtable, but there is no unmapping
+ * behaviour for them, thus we need an explicit cache flush for
+ * the newly-mapped device. For kdump, at this point, the device
+ * is supposed to finish reset at its driver probe stage, so no
+ * in-flight DMA will exist, and we don't need to worry anymore
+ * hereafter.
+ */
+ if (context_copied(context)) {
+ u16 did_old = context_domain_id(context);
+
+ if (did_old >= 0 && did_old < cap_ndoms(iommu->cap))
+ iommu->flush.flush_context(iommu, did_old,
+ (((u16)bus) << 8) | devfn,
+ DMA_CCMD_MASK_NOBIT,
+ DMA_CCMD_DEVICE_INVL);
+ }
+
pgd = domain->pgd;
context_clear_entry(context);
@@ -5020,6 +5039,25 @@ static void intel_iommu_remove_device(struct device *dev)
}
#ifdef CONFIG_INTEL_IOMMU_SVM
+#define MAX_NR_PASID_BITS (20)
+static inline unsigned long intel_iommu_get_pts(struct intel_iommu *iommu)
+{
+ /*
+ * Convert ecap_pss to extend context entry pts encoding, also
+ * respect the soft pasid_max value set by the iommu.
+ * - number of PASID bits = ecap_pss + 1
+ * - number of PASID table entries = 2^(pts + 5)
+ * Therefore, pts = ecap_pss - 4
+ * e.g. KBL ecap_pss = 0x13, PASID has 20 bits, pts = 15
+ */
+ if (ecap_pss(iommu->ecap) < 5)
+ return 0;
+
+ /* pasid_max is encoded as actual number of entries not the bits */
+ return find_first_bit((unsigned long *)&iommu->pasid_max,
+ MAX_NR_PASID_BITS) - 5;
+}
+
int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sdev)
{
struct device_domain_info *info;
@@ -5052,7 +5090,9 @@ int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sd
if (!(ctx_lo & CONTEXT_PASIDE)) {
context[1].hi = (u64)virt_to_phys(iommu->pasid_state_table);
- context[1].lo = (u64)virt_to_phys(iommu->pasid_table) | ecap_pss(iommu->ecap);
+ context[1].lo = (u64)virt_to_phys(iommu->pasid_table) |
+ intel_iommu_get_pts(iommu);
+
wmb();
/* CONTEXT_TT_MULTI_LEVEL and CONTEXT_TT_DEV_IOTLB are both
* extended to permit requests-with-PASID if the PASIDE bit
diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 0fea985ef1dc..d7af88534971 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -216,6 +216,31 @@ static int bcm7038_l1_set_affinity(struct irq_data *d,
return 0;
}
+static void bcm7038_l1_cpu_offline(struct irq_data *d)
+{
+ struct cpumask *mask = irq_data_get_affinity_mask(d);
+ int cpu = smp_processor_id();
+ cpumask_t new_affinity;
+
+ /* This CPU was not on the affinity mask */
+ if (!cpumask_test_cpu(cpu, mask))
+ return;
+
+ if (cpumask_weight(mask) > 1) {
+ /*
+ * Multiple CPU affinity, remove this CPU from the affinity
+ * mask
+ */
+ cpumask_copy(&new_affinity, mask);
+ cpumask_clear_cpu(cpu, &new_affinity);
+ } else {
+ /* Only CPU, put on the lowest online CPU */
+ cpumask_clear(&new_affinity);
+ cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity);
+ }
+ irq_set_affinity_locked(d, &new_affinity, false);
+}
+
static int __init bcm7038_l1_init_one(struct device_node *dn,
unsigned int idx,
struct bcm7038_l1_chip *intc)
@@ -267,6 +292,7 @@ static struct irq_chip bcm7038_l1_irq_chip = {
.irq_mask = bcm7038_l1_mask,
.irq_unmask = bcm7038_l1_unmask,
.irq_set_affinity = bcm7038_l1_set_affinity,
+ .irq_cpu_offline = bcm7038_l1_cpu_offline,
};
static int bcm7038_l1_map(struct irq_domain *d, unsigned int virq,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c1c7d4fb4b77..eff554a12fb4 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6771,7 +6771,7 @@ static int md_ioctl(struct block_device *bdev, fmode_t mode,
/* need to ensure recovery thread has run */
wait_event_interruptible_timeout(mddev->sb_wait,
!test_bit(MD_RECOVERY_NEEDED,
- &mddev->flags),
+ &mddev->recovery),
msecs_to_jiffies(5000));
if (cmd == STOP_ARRAY || cmd == STOP_ARRAY_RO) {
/* Need to flush page cache, and ensure no-one else opens
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index c4307ad8594c..e543cbbf2ec4 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -2168,11 +2168,12 @@ static int dvb_register(struct cx23885_tsport *port)
}
port->i2c_client_tuner = client_tuner;
break;
- case CX23885_BOARD_HAUPPAUGE_HVR5525:
- switch (port->nr) {
+ case CX23885_BOARD_HAUPPAUGE_HVR5525: {
struct m88rs6000t_config m88rs6000t_config;
struct a8293_platform_data a8293_pdata = {};
+ switch (port->nr) {
+
/* port b - satellite */
case 1:
/* attach frontend */
@@ -2267,6 +2268,7 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+ }
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index e59838231703..be74a25708b2 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -399,7 +399,7 @@ bool mei_cldev_enabled(struct mei_cl_device *cldev)
EXPORT_SYMBOL_GPL(mei_cldev_enabled);
/**
- * mei_cldev_enable_device - enable me client device
+ * mei_cldev_enable - enable me client device
* create connection with me client
*
* @cldev: me client device
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index 7fc9174d4619..9a11aaa6e985 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -791,7 +791,7 @@ static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
struct mmc_async_req *cur_areq = &test_areq[0].areq;
struct mmc_async_req *other_areq = &test_areq[1].areq;
int i;
- int ret;
+ int ret = RESULT_OK;
test_areq[0].test = test;
test_areq[1].test = test;
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 50d5604833ed..e0993eba5df3 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -2223,8 +2223,6 @@ static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
return IRQ_NONE;
}
-#ifdef CONFIG_PCI_MSI
-
static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id)
{
struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id;
@@ -2442,16 +2440,13 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev)
if (vdev->config.intr_type == MSI_X)
pci_disable_msix(vdev->pdev);
}
-#endif
static void vxge_rem_isr(struct vxgedev *vdev)
{
-#ifdef CONFIG_PCI_MSI
- if (vdev->config.intr_type == MSI_X) {
+ if (IS_ENABLED(CONFIG_PCI_MSI) &&
+ vdev->config.intr_type == MSI_X) {
vxge_rem_msix_isr(vdev);
- } else
-#endif
- if (vdev->config.intr_type == INTA) {
+ } else if (vdev->config.intr_type == INTA) {
synchronize_irq(vdev->pdev->irq);
free_irq(vdev->pdev->irq, vdev);
}
@@ -2460,11 +2455,10 @@ static void vxge_rem_isr(struct vxgedev *vdev)
static int vxge_add_isr(struct vxgedev *vdev)
{
int ret = 0;
-#ifdef CONFIG_PCI_MSI
int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
int pci_fun = PCI_FUNC(vdev->pdev->devfn);
- if (vdev->config.intr_type == MSI_X)
+ if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X)
ret = vxge_enable_msix(vdev);
if (ret) {
@@ -2475,7 +2469,7 @@ static int vxge_add_isr(struct vxgedev *vdev)
vdev->config.intr_type = INTA;
}
- if (vdev->config.intr_type == MSI_X) {
+ if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X) {
for (intr_idx = 0;
intr_idx < (vdev->no_of_vpath *
VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) {
@@ -2576,9 +2570,8 @@ static int vxge_add_isr(struct vxgedev *vdev)
vdev->vxge_entries[intr_cnt].in_use = 1;
vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0];
}
-INTA_MODE:
-#endif
+INTA_MODE:
if (vdev->config.intr_type == INTA) {
snprintf(vdev->desc[0], VXGE_INTR_STRLEN,
"%s:vxge:INTA", vdev->ndev->name);
@@ -3889,12 +3882,12 @@ static void vxge_device_config_init(struct vxge_hw_device_config *device_config,
if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT)
max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT;
-#ifndef CONFIG_PCI_MSI
- vxge_debug_init(VXGE_ERR,
- "%s: This Kernel does not support "
- "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME);
- *intr_type = INTA;
-#endif
+ if (!IS_ENABLED(CONFIG_PCI_MSI)) {
+ vxge_debug_init(VXGE_ERR,
+ "%s: This Kernel does not support "
+ "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME);
+ *intr_type = INTA;
+ }
/* Configure whether MSI-X or IRQL. */
switch (*intr_type) {
diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
index 77d26fe286c0..d52ea3008946 100644
--- a/drivers/net/ethernet/ti/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -549,7 +549,8 @@ fatal_error:
static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- int queue, len;
+ int queue;
+ unsigned int len;
struct cpmac_desc *desc;
struct cpmac_priv *priv = netdev_priv(dev);
@@ -559,7 +560,7 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(skb_padto(skb, ETH_ZLEN)))
return NETDEV_TX_OK;
- len = max(skb->len, ETH_ZLEN);
+ len = max_t(unsigned int, skb->len, ETH_ZLEN);
queue = skb_get_queue_mapping(skb);
netif_stop_subqueue(dev, queue);
diff --git a/drivers/net/wireless/ath/ath10k/spectral.c b/drivers/net/wireless/ath/ath10k/spectral.c
index 4671cfbcd8f7..a0e7eebc206a 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.c
+++ b/drivers/net/wireless/ath/ath10k/spectral.c
@@ -338,7 +338,7 @@ static ssize_t write_file_spec_scan_ctl(struct file *file,
} else {
res = -EINVAL;
}
- } else if (strncmp("background", buf, 9) == 0) {
+ } else if (strncmp("background", buf, 10) == 0) {
res = ath10k_spectral_scan_config(ar, SPECTRAL_BACKGROUND);
} else if (strncmp("manual", buf, 6) == 0) {
res = ath10k_spectral_scan_config(ar, SPECTRAL_MANUAL);
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index e12bafdc42e0..f2fcbe944d94 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -258,8 +258,13 @@ static int dlpar_add_phb(char *drc_name, struct device_node *dn)
static int dlpar_add_vio_slot(char *drc_name, struct device_node *dn)
{
- if (vio_find_node(dn))
+ struct vio_dev *vio_dev;
+
+ vio_dev = vio_find_node(dn);
+ if (vio_dev) {
+ put_device(&vio_dev->dev);
return -EINVAL;
+ }
if (!vio_register_device_node(dn)) {
printk(KERN_ERR
@@ -335,6 +340,9 @@ static int dlpar_remove_vio_slot(char *drc_name, struct device_node *dn)
return -EINVAL;
vio_unregister_device(vio_dev);
+
+ put_device(&vio_dev->dev);
+
return 0;
}
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index 9270d15ff1a4..7353ac8d0d39 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -621,7 +621,7 @@ static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
{
u32 tmp;
tmp = mvs_cr32(mvi, MVS_COMMAND_ACTIVE+(slot_idx >> 3));
- if (tmp && 1 << (slot_idx % 32)) {
+ if (tmp & 1 << (slot_idx % 32)) {
mv_printk("command active %08X, slot [%x].\n", tmp, slot_idx);
mvs_cw32(mvi, MVS_COMMAND_ACTIVE + (slot_idx >> 3),
1 << (slot_idx % 32));
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 5a536a00066f..b63472de761a 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -69,48 +69,49 @@
* Register map
*/
#define DT2821_ADCSR_REG 0x00
-#define DT2821_ADCSR_ADERR (1 << 15)
-#define DT2821_ADCSR_ADCLK (1 << 9)
-#define DT2821_ADCSR_MUXBUSY (1 << 8)
-#define DT2821_ADCSR_ADDONE (1 << 7)
-#define DT2821_ADCSR_IADDONE (1 << 6)
+#define DT2821_ADCSR_ADERR BIT(15)
+#define DT2821_ADCSR_ADCLK BIT(9)
+#define DT2821_ADCSR_MUXBUSY BIT(8)
+#define DT2821_ADCSR_ADDONE BIT(7)
+#define DT2821_ADCSR_IADDONE BIT(6)
#define DT2821_ADCSR_GS(x) (((x) & 0x3) << 4)
#define DT2821_ADCSR_CHAN(x) (((x) & 0xf) << 0)
#define DT2821_CHANCSR_REG 0x02
-#define DT2821_CHANCSR_LLE (1 << 15)
-#define DT2821_CHANCSR_PRESLA(x) (((x) & 0xf) >> 8)
+#define DT2821_CHANCSR_LLE BIT(15)
+#define DT2821_CHANCSR_TO_PRESLA(x) (((x) >> 8) & 0xf)
#define DT2821_CHANCSR_NUMB(x) ((((x) - 1) & 0xf) << 0)
#define DT2821_ADDAT_REG 0x04
#define DT2821_DACSR_REG 0x06
-#define DT2821_DACSR_DAERR (1 << 15)
+#define DT2821_DACSR_DAERR BIT(15)
#define DT2821_DACSR_YSEL(x) ((x) << 9)
-#define DT2821_DACSR_SSEL (1 << 8)
-#define DT2821_DACSR_DACRDY (1 << 7)
-#define DT2821_DACSR_IDARDY (1 << 6)
-#define DT2821_DACSR_DACLK (1 << 5)
-#define DT2821_DACSR_HBOE (1 << 1)
-#define DT2821_DACSR_LBOE (1 << 0)
+#define DT2821_DACSR_SSEL BIT(8)
+#define DT2821_DACSR_DACRDY BIT(7)
+#define DT2821_DACSR_IDARDY BIT(6)
+#define DT2821_DACSR_DACLK BIT(5)
+#define DT2821_DACSR_HBOE BIT(1)
+#define DT2821_DACSR_LBOE BIT(0)
#define DT2821_DADAT_REG 0x08
#define DT2821_DIODAT_REG 0x0a
#define DT2821_SUPCSR_REG 0x0c
-#define DT2821_SUPCSR_DMAD (1 << 15)
-#define DT2821_SUPCSR_ERRINTEN (1 << 14)
-#define DT2821_SUPCSR_CLRDMADNE (1 << 13)
-#define DT2821_SUPCSR_DDMA (1 << 12)
-#define DT2821_SUPCSR_DS_PIO (0 << 10)
-#define DT2821_SUPCSR_DS_AD_CLK (1 << 10)
-#define DT2821_SUPCSR_DS_DA_CLK (2 << 10)
-#define DT2821_SUPCSR_DS_AD_TRIG (3 << 10)
-#define DT2821_SUPCSR_BUFFB (1 << 9)
-#define DT2821_SUPCSR_SCDN (1 << 8)
-#define DT2821_SUPCSR_DACON (1 << 7)
-#define DT2821_SUPCSR_ADCINIT (1 << 6)
-#define DT2821_SUPCSR_DACINIT (1 << 5)
-#define DT2821_SUPCSR_PRLD (1 << 4)
-#define DT2821_SUPCSR_STRIG (1 << 3)
-#define DT2821_SUPCSR_XTRIG (1 << 2)
-#define DT2821_SUPCSR_XCLK (1 << 1)
-#define DT2821_SUPCSR_BDINIT (1 << 0)
+#define DT2821_SUPCSR_DMAD BIT(15)
+#define DT2821_SUPCSR_ERRINTEN BIT(14)
+#define DT2821_SUPCSR_CLRDMADNE BIT(13)
+#define DT2821_SUPCSR_DDMA BIT(12)
+#define DT2821_SUPCSR_DS(x) (((x) & 0x3) << 10)
+#define DT2821_SUPCSR_DS_PIO DT2821_SUPCSR_DS(0)
+#define DT2821_SUPCSR_DS_AD_CLK DT2821_SUPCSR_DS(1)
+#define DT2821_SUPCSR_DS_DA_CLK DT2821_SUPCSR_DS(2)
+#define DT2821_SUPCSR_DS_AD_TRIG DT2821_SUPCSR_DS(3)
+#define DT2821_SUPCSR_BUFFB BIT(9)
+#define DT2821_SUPCSR_SCDN BIT(8)
+#define DT2821_SUPCSR_DACON BIT(7)
+#define DT2821_SUPCSR_ADCINIT BIT(6)
+#define DT2821_SUPCSR_DACINIT BIT(5)
+#define DT2821_SUPCSR_PRLD BIT(4)
+#define DT2821_SUPCSR_STRIG BIT(3)
+#define DT2821_SUPCSR_XTRIG BIT(2)
+#define DT2821_SUPCSR_XCLK BIT(1)
+#define DT2821_SUPCSR_BDINIT BIT(0)
#define DT2821_TMRCTR_REG 0x0e
static const struct comedi_lrange range_dt282x_ai_lo_bipolar = {
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 5796ed2409d0..39bbbaaff07c 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -189,7 +189,7 @@ static ssize_t ad7606_store_oversampling_ratio(struct device *dev,
mutex_lock(&indio_dev->mlock);
gpio_set_value(st->pdata->gpio_os0, (ret >> 0) & 1);
gpio_set_value(st->pdata->gpio_os1, (ret >> 1) & 1);
- gpio_set_value(st->pdata->gpio_os1, (ret >> 2) & 1);
+ gpio_set_value(st->pdata->gpio_os2, (ret >> 2) & 1);
st->oversampling = lval;
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 23c95cd14167..68261b7dcefe 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -260,7 +260,6 @@ err_out:
iscsi_release_param_list(tpg->param_list);
tpg->param_list = NULL;
}
- kfree(tpg);
return -ENOMEM;
}
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index ff44cfa26af8..ac30a051ad71 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -205,6 +205,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
+ /* Check for duplicate endpoint addresses */
+ for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+ if (ifp->endpoint[i].desc.bEndpointAddress ==
+ d->bEndpointAddress) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
+ }
+ }
+
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ifp->desc.bNumEndpoints;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 496d6a558793..780db8bb2262 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -101,8 +101,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
- struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
@@ -885,34 +884,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
}
/*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *hdev = hub->hdev;
- int ret = 0;
-
- if (!hub->error) {
- if (hub_is_superspeed(hub->hdev)) {
- hub_usb3_port_prepare_disable(hub, port_dev);
- ret = hub_set_port_link_state(hub, port_dev->portnum,
- USB_SS_PORT_LS_U3);
- } else {
- ret = usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_ENABLE);
- }
- }
- if (port_dev->child && set_state)
- usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
- if (ret && ret != -ENODEV)
- dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
- return ret;
-}
-
-/*
* Disable a port and mark a logical connect-change event, so that some
* time later hub_wq will disconnect() any existing usb_device on the port
* and will re-enumerate if there actually is a device attached.
@@ -4086,6 +4057,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
#endif /* CONFIG_PM */
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+ int ret = 0;
+
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev)) {
+ hub_usb3_port_prepare_disable(hub, port_dev);
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U3);
+ } else {
+ ret = usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
+ }
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+ if (ret && ret != -ENODEV)
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+ return ret;
+}
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 78be201d81f4..68d11d7d4028 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -42,9 +42,7 @@
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE 4 /* bytes */
-#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
#define DWC3_EVENT_TYPE_DEV 0
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 3d731d1b5c60..d2c0c1a8d979 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -37,6 +37,7 @@
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
@@ -216,6 +217,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index b13912d5fa99..f13e9e9fb834 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -55,20 +55,13 @@ static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
}
}
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len, u32 type, bool chain)
+static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+ dma_addr_t buf_dma, u32 len, u32 type, bool chain)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb *trb;
struct dwc3_ep *dep;
- int ret;
-
dep = dwc->eps[epnum];
- if (dep->flags & DWC3_EP_BUSY) {
- dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
- return 0;
- }
trb = &dwc->ep0_trb[dep->free_slot];
@@ -89,15 +82,25 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
trb->ctrl |= (DWC3_TRB_CTRL_IOC
| DWC3_TRB_CTRL_LST);
- if (chain)
+ trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+{
+ struct dwc3_gadget_ep_cmd_params params;
+ struct dwc3_ep *dep;
+ int ret;
+
+ dep = dwc->eps[epnum];
+ if (dep->flags & DWC3_EP_BUSY) {
+ dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
return 0;
+ }
memset(¶ms, 0, sizeof(params));
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
- trace_dwc3_prepare_trb(dep, trb);
-
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_STARTTRANSFER, ¶ms);
if (ret < 0) {
@@ -311,8 +314,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
{
int ret;
- ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+ dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
DWC3_TRBCTL_CONTROL_SETUP, false);
+ ret = dwc3_ep0_start_trans(dwc, 0);
WARN_ON(ret < 0);
}
@@ -871,9 +875,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
- ret = dwc3_ep0_start_trans(dwc, epnum,
- dwc->ctrl_req_addr, 0,
- DWC3_TRBCTL_CONTROL_DATA, false);
+ dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
+ 0, DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, epnum);
WARN_ON(ret < 0);
}
}
@@ -955,9 +959,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->direction = !!dep->number;
if (req->request.length == 0) {
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
u32 transfer_size = 0;
@@ -975,7 +980,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
transfer_size = ALIGN(req->request.length - maxpacket,
maxpacket);
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
req->request.dma,
transfer_size,
DWC3_TRBCTL_CONTROL_DATA,
@@ -987,9 +992,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
dwc->ep0_bounced = true;
- ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ep0_bounce_addr, transfer_size,
DWC3_TRBCTL_CONTROL_DATA, false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
} else {
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
@@ -998,9 +1004,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
return;
}
- ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
req->request.length, DWC3_TRBCTL_CONTROL_DATA,
false);
+ ret = dwc3_ep0_start_trans(dwc, dep->number);
}
WARN_ON(ret < 0);
@@ -1014,8 +1021,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
- return dwc3_ep0_start_trans(dwc, dep->number,
+ dwc3_ep0_prepare_one_trb(dwc, dep->number,
dwc->ctrl_req_addr, 0, type, false);
+ return dwc3_ep0_start_trans(dwc, dep->number);
}
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5ae2b7d3a74a..210ff64857e1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -259,11 +259,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- if (dwc->ep0_bounced && dep->number == 0)
+ if (dwc->ep0_bounced && dep->number <= 1)
dwc->ep0_bounced = false;
- else
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
req, dep->name, req->request.actual,
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 739b5e2d8adb..e2641d4dfdd6 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -152,7 +152,7 @@ ep_found:
if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) ||
usb_endpoint_xfer_int(_ep->desc)))
- _ep->mult = usb_endpoint_maxp(_ep->desc) & 0x7ff;
+ _ep->mult = ((usb_endpoint_maxp(_ep->desc) & 0x1800) >> 11) + 1;
if (!want_comp_desc)
return 0;
@@ -1601,9 +1601,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min(w_length, (u16) 1);
break;
- /* function drivers must handle get/set altsetting; if there's
- * no get() method, we know only altsetting zero works.
- */
+ /* function drivers must handle get/set altsetting */
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
@@ -1612,7 +1610,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
f = cdev->config->interface[intf];
if (!f)
break;
- if (w_value && !f->set_alt)
+
+ /*
+ * If there's no get_alt() method, we know only altsetting zero
+ * works. There is no need to check if set_alt() is not NULL
+ * as we check this in usb_add_function().
+ */
+ if (w_value && !f->get_alt)
break;
value = f->set_alt(f, w_index, w_value);
if (value == USB_GADGET_DELAYED_STATUS) {
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e57f48f9528f..de014436fb22 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1125,7 +1125,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
/* data and/or status stage for control request */
} else if (dev->state == STATE_DEV_SETUP) {
- /* IN DATA+STATUS caller makes len <= wLength */
+ len = min_t(size_t, len, dev->setup_wLength);
if (dev->setup_in) {
retval = setup_req (dev->gadget->ep0, dev->req, len);
if (retval == 0) {
@@ -1755,10 +1755,12 @@ static struct usb_gadget_driver probe_driver = {
* such as configuration notifications.
*/
-static int is_valid_config (struct usb_config_descriptor *config)
+static int is_valid_config(struct usb_config_descriptor *config,
+ unsigned int total)
{
return config->bDescriptorType == USB_DT_CONFIG
&& config->bLength == USB_DT_CONFIG_SIZE
+ && total >= USB_DT_CONFIG_SIZE
&& config->bConfigurationValue != 0
&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
@@ -1783,7 +1785,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
}
spin_unlock_irq(&dev->lock);
- if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+ if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+ (len > PAGE_SIZE * 4))
return -EINVAL;
/* we might need to change message format someday */
@@ -1807,7 +1810,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
/* full or low speed config */
dev->config = (void *) kbuf;
total = le16_to_cpu(dev->config->wTotalLength);
- if (!is_valid_config (dev->config) || total >= length)
+ if (!is_valid_config(dev->config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
@@ -1816,10 +1820,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (kbuf [1] == USB_DT_CONFIG) {
dev->hs_config = (void *) kbuf;
total = le16_to_cpu(dev->hs_config->wTotalLength);
- if (!is_valid_config (dev->hs_config) || total >= length)
+ if (!is_valid_config(dev->hs_config, total) ||
+ total > length - USB_DT_DEVICE_SIZE)
goto fail;
kbuf += total;
length -= total;
+ } else {
+ dev->hs_config = NULL;
}
/* could support multiple configs, using another encoding! */
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index dde44450dfa9..22d067cd5aa3 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep)
/* caller must hold lock */
static void stop_activity(struct dummy *dum)
{
- struct dummy_ep *ep;
+ int i;
/* prevent any more requests */
dum->address = 0;
@@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum)
/* The timer is left running so that outstanding URBs can fail */
/* nuke any pending requests first, so driver i/o is quiesced */
- list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
- nuke(dum, ep);
+ for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+ nuke(dum, &dum->ep[i]);
/* driver now does any non-usb quiescing necessary */
}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index b9d6940479da..e9675e8f0e54 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1346,6 +1346,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
return 0;
}
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(int port_index,
+ __le32 __iomem **port_array)
+{
+ u32 portsc;
+
+ portsc = readl(port_array[port_index]);
+
+ /* if any of these are set we are not stuck */
+ if (portsc & (PORT_CONNECT | PORT_CAS))
+ return false;
+
+ if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+ ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+ return false;
+
+ /* clear wakeup/change bits, and do a warm port reset */
+ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+ portsc |= PORT_WR;
+ writel(portsc, port_array[port_index]);
+ /* flush write */
+ readl(port_array[port_index]);
+ return true;
+}
+
int xhci_bus_resume(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -1383,6 +1412,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
u32 temp;
temp = readl(port_array[port_index]);
+
+ /* warm reset CAS limited ports stuck in polling/compliance */
+ if ((xhci->quirks & XHCI_MISSING_CAS) &&
+ (hcd->speed >= HCD_USB3) &&
+ xhci_port_missing_cas_quirk(port_index, port_array)) {
+ xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+ continue;
+ }
if (DEV_SUPERSPEED_ANY(temp))
temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
else
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8ea2c05beca2..998a738e6359 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -964,6 +964,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
xhci->devs[slot_id] = NULL;
}
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *vdev;
+ struct list_head *tt_list_head;
+ struct xhci_tt_bw_info *tt_info, *next;
+ int i;
+
+ vdev = xhci->devs[slot_id];
+ if (!vdev)
+ return;
+
+ tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* is this a hub device that added a tt_info to the tts list */
+ if (tt_info->slot_id == slot_id) {
+ /* are any devices using this tt_info? */
+ for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+ vdev = xhci->devs[i];
+ if (vdev && (vdev->tt_info == tt_info))
+ xhci_free_virt_devices_depth_first(
+ xhci, i);
+ }
+ }
+ }
+ /* we are now at a leaf device */
+ xhci_free_virt_device(xhci, slot_id);
+}
+
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
@@ -1795,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int size;
int i, j, num_ports;
- del_timer_sync(&xhci->cmd_timer);
+ cancel_delayed_work_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1828,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
- for (i = 1; i < MAX_HC_SLOTS; ++i)
- xhci_free_virt_device(xhci, i);
+ for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+ xhci_free_virt_devices_depth_first(xhci, i);
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
@@ -2361,9 +2395,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
INIT_LIST_HEAD(&xhci->cmd_list);
- /* init command timeout timer */
- setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
- (unsigned long)xhci);
+ /* init command timeout work */
+ INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+ init_completion(&xhci->cmd_ring_stop_completion);
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
@@ -2402,7 +2436,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
* "physically contiguous and 64-byte (cache line) aligned".
*/
xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
- GFP_KERNEL);
+ flags);
if (!xhci->dcbaa)
goto fail;
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
@@ -2498,7 +2532,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->erst.entries = dma_alloc_coherent(dev,
sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma,
- GFP_KERNEL);
+ flags);
if (!xhci->erst.entries)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cf147ccac7d3..dd262f418140 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -51,6 +51,7 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
+#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
static const char hcd_name[] = "xhci_hcd";
@@ -165,9 +166,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+ xhci->quirks |= XHCI_MISSING_CAS;
+
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 62a5c8d5e028..fa5d8c2f6982 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,23 +280,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
readl(&xhci->dba->doorbell[0]);
}
-static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+ return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+ return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+ cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+ struct xhci_command *cur_cmd)
+{
+ struct xhci_command *i_cmd;
+ u32 cycle_state;
+
+ /* Turn all aborted commands in list to no-ops, then restart */
+ list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+ if (i_cmd->status != COMP_CMD_ABORT)
+ continue;
+
+ i_cmd->status = COMP_CMD_STOP;
+
+ xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+ i_cmd->command_trb);
+ /* get cycle state from the original cmd trb */
+ cycle_state = le32_to_cpu(
+ i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
+ /* modify the command trb to no-op command */
+ i_cmd->command_trb->generic.field[0] = 0;
+ i_cmd->command_trb->generic.field[1] = 0;
+ i_cmd->command_trb->generic.field[2] = 0;
+ i_cmd->command_trb->generic.field[3] = cpu_to_le32(
+ TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+
+ /*
+ * caller waiting for completion is called when command
+ * completion event is received for these no-op commands
+ */
+ }
+
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+ /* ring command ring doorbell to restart the command ring */
+ if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+ !(xhci->xhc_state & XHCI_STATE_DYING)) {
+ xhci->current_cmd = cur_cmd;
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_ring_cmd_db(xhci);
+ }
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
u64 temp_64;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
- temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
- xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+ reinit_completion(&xhci->cmd_ring_stop_completion);
- /*
- * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
- * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
- * but the completion event in never sent. Use the cmd timeout timer to
- * handle those cases. Use twice the time to cover the bit polling retry
- */
- mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
&xhci->op_regs->cmd_ring);
@@ -316,16 +369,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
udelay(1000);
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
- if (ret == 0)
- return 0;
-
- xhci_err(xhci, "Stopped the command ring failed, "
- "maybe the host is dead\n");
- del_timer(&xhci->cmd_timer);
- xhci->xhc_state |= XHCI_STATE_DYING;
- xhci_quiesce(xhci);
- xhci_halt(xhci);
- return -ESHUTDOWN;
+ if (ret < 0) {
+ xhci_err(xhci, "Stopped the command ring failed, "
+ "maybe the host is dead\n");
+ xhci->xhc_state |= XHCI_STATE_DYING;
+ xhci_quiesce(xhci);
+ xhci_halt(xhci);
+ return -ESHUTDOWN;
+ }
+ }
+ /*
+ * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+ * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+ * but the completion event in never sent. Wait 2 secs (arbitrary
+ * number) to handle those cases after negation of CMD_RING_RUNNING.
+ */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+ msecs_to_jiffies(2000));
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!ret) {
+ xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+ xhci_cleanup_command_queue(xhci);
+ } else {
+ xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
}
return 0;
@@ -1208,101 +1275,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT);
}
-/*
- * Turn all commands on command ring with status set to "aborted" to no-op trbs.
- * If there are other commands waiting then restart the ring and kick the timer.
- * This must be called with command ring stopped and xhci->lock held.
- */
-static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
- struct xhci_command *cur_cmd)
-{
- struct xhci_command *i_cmd, *tmp_cmd;
- u32 cycle_state;
-
- /* Turn all aborted commands in list to no-ops, then restart */
- list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list,
- cmd_list) {
-
- if (i_cmd->status != COMP_CMD_ABORT)
- continue;
-
- i_cmd->status = COMP_CMD_STOP;
-
- xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
- i_cmd->command_trb);
- /* get cycle state from the original cmd trb */
- cycle_state = le32_to_cpu(
- i_cmd->command_trb->generic.field[3]) & TRB_CYCLE;
- /* modify the command trb to no-op command */
- i_cmd->command_trb->generic.field[0] = 0;
- i_cmd->command_trb->generic.field[1] = 0;
- i_cmd->command_trb->generic.field[2] = 0;
- i_cmd->command_trb->generic.field[3] = cpu_to_le32(
- TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
-
- /*
- * caller waiting for completion is called when command
- * completion event is received for these no-op commands
- */
- }
-
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
- /* ring command ring doorbell to restart the command ring */
- if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
- !(xhci->xhc_state & XHCI_STATE_DYING)) {
- xhci->current_cmd = cur_cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
- xhci_ring_cmd_db(xhci);
- }
- return;
-}
-
-
-void xhci_handle_command_timeout(unsigned long data)
+void xhci_handle_command_timeout(struct work_struct *work)
{
struct xhci_hcd *xhci;
int ret;
unsigned long flags;
u64 hw_ring_state;
- bool second_timeout = false;
- xhci = (struct xhci_hcd *) data;
- /* mark this command to be cancelled */
+ xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
spin_lock_irqsave(&xhci->lock, flags);
- if (xhci->current_cmd) {
- if (xhci->current_cmd->status == COMP_CMD_ABORT)
- second_timeout = true;
- xhci->current_cmd->status = COMP_CMD_ABORT;
+
+ /*
+ * If timeout work is pending, or current_cmd is NULL, it means we
+ * raced with command completion. Command is handled so just return.
+ */
+ if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
}
+ /* mark this command to be cancelled */
+ xhci->current_cmd->status = COMP_CMD_ABORT;
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
- spin_unlock_irqrestore(&xhci->lock, flags);
+ /* Prevent new doorbell, and start command abort */
+ xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
xhci_dbg(xhci, "Command timeout\n");
- ret = xhci_abort_cmd_ring(xhci);
+ ret = xhci_abort_cmd_ring(xhci, flags);
if (unlikely(ret == -ESHUTDOWN)) {
xhci_err(xhci, "Abort command ring failed\n");
xhci_cleanup_command_queue(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+ return;
}
- return;
+
+ goto time_out_completed;
}
- /* command ring failed to restart, or host removed. Bail out */
- if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+ /* host removed. Bail out */
+ if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+ xhci_dbg(xhci, "host removed, ring start fail?\n");
xhci_cleanup_command_queue(xhci);
- return;
+
+ goto time_out_completed;
}
/* command timeout on stopped ring, ring can't be aborted */
xhci_dbg(xhci, "Command timeout on stopped ring\n");
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
@@ -1335,7 +1363,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
- del_timer(&xhci->cmd_timer);
+ cancel_delayed_work(&xhci->cmd_timer);
trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
@@ -1343,7 +1371,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
if (cmd_comp_code == COMP_CMD_STOP) {
- xhci_handle_stopped_cmd_ring(xhci, cmd);
+ complete_all(&xhci->cmd_ring_stop_completion);
return;
}
@@ -1361,8 +1389,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
*/
if (cmd_comp_code == COMP_CMD_ABORT) {
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
- if (cmd->status == COMP_CMD_ABORT)
+ if (cmd->status == COMP_CMD_ABORT) {
+ if (xhci->current_cmd == cmd)
+ xhci->current_cmd = NULL;
goto event_handled;
+ }
}
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
@@ -1423,7 +1454,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
if (cmd->cmd_list.next != &xhci->cmd_list) {
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ } else if (xhci->current_cmd == cmd) {
+ xhci->current_cmd = NULL;
}
event_handled:
@@ -4056,9 +4089,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
/* if there are no other commands queued we start the timeout timer */
if (xhci->cmd_list.next == &cmd->cmd_list &&
- !timer_pending(&xhci->cmd_timer)) {
+ !delayed_work_pending(&xhci->cmd_timer)) {
xhci->current_cmd = cmd;
- mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
}
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index adc169d2fd76..a8b3c0fc11fb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3808,8 +3808,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
mutex_lock(&xhci->mutex);
- if (xhci->xhc_state) /* dying, removing or halted */
+ if (xhci->xhc_state) { /* dying, removing or halted */
+ ret = -ESHUTDOWN;
goto out;
+ }
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 99ac2289dbf3..fc2ee6c272c4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -312,6 +312,8 @@ struct xhci_op_regs {
#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
#define XDEV_INACTIVE (0x6 << 5)
+#define XDEV_POLLING (0x7 << 5)
+#define XDEV_COMP_MODE (0xa << 5)
#define XDEV_RESUME (0xf << 5)
/* true: port has power (see HCC_PPC) */
#define PORT_POWER (1 << 9)
@@ -1550,7 +1552,8 @@ struct xhci_hcd {
#define CMD_RING_STATE_STOPPED (1 << 2)
struct list_head cmd_list;
unsigned int cmd_ring_reserved_trbs;
- struct timer_list cmd_timer;
+ struct delayed_work cmd_timer;
+ struct completion cmd_ring_stop_completion;
struct xhci_command *current_cmd;
struct xhci_ring *event_ring;
struct xhci_erst erst;
@@ -1631,6 +1634,7 @@ struct xhci_hcd {
/* For controllers with a broken beyond repair streams implementation */
#define XHCI_BROKEN_STREAMS (1 << 19)
#define XHCI_PME_STUCK_QUIRK (1 << 20)
+#define XHCI_MISSING_CAS (1 << 24)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
@@ -1912,7 +1916,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
-void xhci_handle_command_timeout(unsigned long data);
+void xhci_handle_command_timeout(struct work_struct *work);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 310238c6b5cd..896798071817 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = {
.init = bfin_musb_init,
.exit = bfin_musb_exit,
+ .fifo_offset = bfin_fifo_offset,
.readb = bfin_readb,
.writeb = bfin_writeb,
.readw = bfin_readw,
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2337d7a7d62d..90de7900e4b8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -214,6 +214,7 @@ struct musb_platform_ops {
dma_addr_t *dma_addr, u32 *len);
void (*pre_root_reset_end)(struct musb *musb);
void (*post_root_reset_end)(struct musb *musb);
+ void (*clear_ep_rxintr)(struct musb *musb, int epnum);
};
/*
@@ -612,4 +613,10 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
musb->ops->post_root_reset_end(musb);
}
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ if (musb->ops->clear_ep_rxintr)
+ musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index eeb7d9ecf7df..5a021b26d7d2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -301,6 +301,17 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
+void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+ u32 epintr;
+ struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+ const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+ /* musb->lock might already been held */
+ epintr = (1 << epnum) << wrp->rxep_shift;
+ musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
static irqreturn_t dsps_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
@@ -647,6 +658,7 @@ static struct musb_platform_ops dsps_ops = {
.try_idle = dsps_musb_try_idle,
.set_mode = dsps_musb_set_mode,
.recover = dsps_musb_recover,
+ .clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
};
static u64 musb_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index e0a083f6ab68..13d5614f37f1 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2390,12 +2390,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
int is_in = usb_pipein(urb->pipe);
int status = 0;
u16 csr;
+ struct dma_channel *dma = NULL;
musb_ep_select(regs, hw_end);
if (is_dma_capable()) {
- struct dma_channel *dma;
-
dma = is_in ? ep->rx_channel : ep->tx_channel;
if (dma) {
status = ep->musb->dma_controller->channel_abort(dma);
@@ -2412,10 +2411,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
/* giveback saves bulk toggle */
csr = musb_h_flush_rxfifo(ep, 0);
- /* REVISIT we still get an irq; should likely clear the
- * endpoint's irq status here to avoid bogus irqs.
- * clearing that status is platform-specific...
- */
+ /* clear the endpoint's irq status here to avoid bogus irqs */
+ if (is_dma_capable() && dma)
+ musb_platform_clear_ep_rxintr(musb, ep->epnum);
} else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f7b13fd25257..a3dcbd55e436 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -157,5 +157,5 @@ struct musb_dma_controller {
void __iomem *base;
u8 channel_count;
u8 used_channels;
- u8 irq;
+ int irq;
};
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 7b3035ff9434..1b4d742a2397 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -126,10 +126,12 @@ struct phy_control *am335x_get_phy_control(struct device *dev)
return NULL;
dev = bus_find_device(&platform_bus_type, NULL, node, match);
+ of_node_put(node);
if (!dev)
return NULL;
ctrl_usb = dev_get_drvdata(dev);
+ put_device(dev);
if (!ctrl_usb)
return NULL;
return &ctrl_usb->phy_ctrl;
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 2916dea3ede8..8948f375e75d 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
#define CYBERJACK_PRODUCT_ID 0x0100
/* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
static int cyberjack_port_probe(struct usb_serial_port *port);
static int cyberjack_port_remove(struct usb_serial_port *port);
static int cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
.description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_ports = 1,
+ .attach = cyberjack_attach,
.port_probe = cyberjack_port_probe,
.port_remove = cyberjack_port_remove,
.open = cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
short wrsent; /* Data already sent */
};
+static int cyberjack_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int cyberjack_port_probe(struct usb_serial_port *port)
{
struct cyberjack_private *priv;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index db591d19d416..37d0e8cc7af6 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1044,6 +1044,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
__func__, status);
count = status;
+ kfree(buffer);
}
/* we are done with this urb, so let the host driver
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 1947ea0e0988..b63a6c3899c5 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2761,6 +2761,11 @@ static int edge_startup(struct usb_serial *serial)
EDGE_COMPATIBILITY_MASK1,
EDGE_COMPATIBILITY_MASK2 };
+ if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
dev = serial->dev;
/* create our private serial structure */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index fce82fd79f77..c02808a30436 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
- /* return an error on purpose */
- return -ENODEV;
+ return 1;
}
stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
serial->product_info.TiMode = TI_MODE_BOOT;
- return 0;
+ return 1;
}
static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2549,6 +2548,13 @@ static int edge_startup(struct usb_serial *serial)
int status;
u16 product_id;
+ /* Make sure we have the required endpoints when in download mode. */
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+ }
+
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (!edge_serial)
@@ -2556,14 +2562,18 @@ static int edge_startup(struct usb_serial *serial)
mutex_init(&edge_serial->es_lock);
edge_serial->serial = serial;
+ INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
usb_set_serial_data(serial, edge_serial);
status = download_fw(edge_serial);
- if (status) {
+ if (status < 0) {
kfree(edge_serial);
return status;
}
+ if (status > 0)
+ return 1; /* bind but do not register any ports */
+
product_id = le16_to_cpu(
edge_serial->serial->dev->descriptor.idProduct);
@@ -2575,7 +2585,6 @@ static int edge_startup(struct usb_serial *serial)
}
}
- INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
edge_heartbeat_schedule(edge_serial);
return 0;
@@ -2583,6 +2592,9 @@ static int edge_startup(struct usb_serial *serial)
static void edge_disconnect(struct usb_serial *serial)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+ cancel_delayed_work_sync(&edge_serial->heartbeat_work);
}
static void edge_release(struct usb_serial *serial)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 5ad4a0fb4b26..7ed7d33d6c10 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
u32 clk;
};
+static int iuu_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
static int iuu_port_probe(struct usb_serial_port *port)
{
struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
.init_termios = iuu_init_termios,
+ .attach = iuu_attach,
.port_probe = iuu_port_probe,
.port_remove = iuu_port_remove,
};
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 4f7e072e4e00..930be98d59b3 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
#endif
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int keyspan_pda_port_probe(struct usb_serial_port *port)
{
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
.break_ctl = keyspan_pda_break_ctl,
.tiocmget = keyspan_pda_tiocmget,
.tiocmset = keyspan_pda_tiocmset,
+ .attach = keyspan_pda_attach,
.port_probe = keyspan_pda_port_probe,
.port_remove = keyspan_pda_port_remove,
};
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 53c90131764d..cd0322502ab1 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -311,6 +311,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
if (rc < 0) {
dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
retval = rc;
+ goto err_generic_close;
} else
dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
@@ -337,6 +338,7 @@ err_disable_read:
0, /* index */
NULL, 0,
KLSI_TIMEOUT);
+err_generic_close:
usb_serial_generic_close(port);
err_free_cfg:
kfree(cfg);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 2363654cafc9..813035f51fe7 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
/* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
static int kobil_port_probe(struct usb_serial_port *probe);
static int kobil_port_remove(struct usb_serial_port *probe);
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
.description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_ports = 1,
+ .attach = kobil_attach,
.port_probe = kobil_port_probe,
.port_remove = kobil_port_remove,
.ioctl = kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
};
+static int kobil_attach(struct usb_serial *serial)
+{
+ if (serial->num_interrupt_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int kobil_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 63db004af21f..e56cdb436de3 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
struct urb *write_urb_pool[NUM_URBS];
};
-static struct usb_serial_driver moschip7720_2port_driver;
-
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7720 0x7720
#define MOSCHIP_DEVICE_ID_7715 0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
tty_port_tty_wakeup(&mos7720_port->port->port);
}
-/*
- * mos77xx_probe
- * this function installs the appropriate read interrupt endpoint callback
- * depending on whether the device is a 7720 or 7715, thus avoiding costly
- * run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
- if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
- moschip7720_2port_driver.read_int_callback =
- mos7715_interrupt_callback;
- else
- moschip7720_2port_driver.read_int_callback =
- mos7720_interrupt_callback;
-
- return 0;
-}
-
static int mos77xx_calc_num_ports(struct usb_serial *serial)
{
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1920,6 +1899,11 @@ static int mos7720_startup(struct usb_serial *serial)
u16 product;
int ret_val;
+ if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+ return -ENODEV;
+ }
+
product = le16_to_cpu(serial->dev->descriptor.idProduct);
dev = serial->dev;
@@ -1944,19 +1928,18 @@ static int mos7720_startup(struct usb_serial *serial)
tmp->interrupt_in_endpointAddress;
serial->port[1]->interrupt_in_urb = NULL;
serial->port[1]->interrupt_in_buffer = NULL;
+
+ if (serial->port[0]->interrupt_in_urb) {
+ struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+ urb->complete = mos7715_interrupt_callback;
+ }
}
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
- /* start the interrupt urb */
- ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
- if (ret_val)
- dev_err(&dev->dev,
- "%s - Error %d submitting control urb\n",
- __func__, ret_val);
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
if (product == MOSCHIP_DEVICE_ID_7715) {
ret_val = mos7715_parport_init(serial);
@@ -1964,6 +1947,13 @@ static int mos7720_startup(struct usb_serial *serial)
return ret_val;
}
#endif
+ /* start the interrupt urb */
+ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+ if (ret_val) {
+ dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+ ret_val);
+ }
+
/* LSR For Port 1 */
read_mos_reg(serial, 0, MOS7720_LSR, &data);
dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1973,6 +1963,8 @@ static int mos7720_startup(struct usb_serial *serial)
static void mos7720_release(struct usb_serial *serial)
{
+ usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
@@ -2056,7 +2048,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.close = mos7720_close,
.throttle = mos7720_throttle,
.unthrottle = mos7720_unthrottle,
- .probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
.port_probe = mos7720_port_probe,
@@ -2070,7 +2061,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.chars_in_buffer = mos7720_chars_in_buffer,
.break_ctl = mos7720_break,
.read_bulk_callback = mos7720_bulk_in_callback,
- .read_int_callback = NULL /* dynamically assigned in probe() */
+ .read_int_callback = mos7720_interrupt_callback,
};
static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7f3ddd7ba2ce..97ea52b5cfd4 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2116,6 +2116,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
return mos7840_num_ports;
}
+static int mos7840_attach(struct usb_serial *serial)
+{
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int mos7840_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
@@ -2391,6 +2402,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
.tiocmset = mos7840_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
+ .attach = mos7840_attach,
.port_probe = mos7840_port_probe,
.port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index f6c6900bccf0..a180b17d2432 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
static int omninet_port_probe(struct usb_serial_port *port);
static int omninet_port_remove(struct usb_serial_port *port);
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
+ .attach = omninet_attach,
.port_probe = omninet_port_probe,
.port_remove = omninet_port_remove,
.open = omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
+static int omninet_attach(struct usb_serial *serial)
+{
+ /* The second bulk-out endpoint is used for writing. */
+ if (serial->num_bulk_out < 2) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a4b88bc038b6..b8bf52bf7a94 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
static int oti6858_tiocmget(struct tty_struct *tty);
static int oti6858_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
static int oti6858_port_probe(struct usb_serial_port *port);
static int oti6858_port_remove(struct usb_serial_port *port);
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
.write_bulk_callback = oti6858_write_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
+ .attach = oti6858_attach,
.port_probe = oti6858_port_probe,
.port_remove = oti6858_port_remove,
};
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
usb_serial_port_softint(port);
}
+static int oti6858_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int oti6858_port_probe(struct usb_serial_port *port)
{
struct oti6858_private *priv;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae682e4eeaef..46fca6b75846 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial,
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
+ unsigned char num_ports = serial->num_ports;
enum pl2303_type type = TYPE_01;
unsigned char *buf;
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports ||
+ serial->num_interrupt_in < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index b18974cbd995..a3ed07c58754 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
{
struct usb_serial *serial;
struct qt2_port_private *port_priv;
- unsigned long flags;
int i;
serial = port->serial;
port_priv = usb_get_serial_port_data(port);
- spin_lock_irqsave(&port_priv->urb_lock, flags);
usb_kill_urb(port_priv->write_urb);
- port_priv->urb_in_use = false;
- spin_unlock_irqrestore(&port_priv->urb_lock, flags);
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ef0dbf0703c5..475e6c31b266 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
return 0;
}
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int spcp8x5_port_probe(struct usb_serial_port *port)
{
const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
.probe = spcp8x5_probe,
+ .attach = spcp8x5_attach,
.port_probe = spcp8x5_port_probe,
.port_remove = spcp8x5_port_remove,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 2694df2f4559..535fcfafc097 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -339,6 +339,13 @@ static int ti_startup(struct usb_serial *serial)
goto free_tdev;
}
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ status = -ENODEV;
+ goto free_tdev;
+ }
+
return 0;
free_tdev:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ffe4209067b..640a2e2ec04d 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2135,6 +2135,13 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+ "JMicron",
+ "JMS56x",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
/*
* Patch by Constantin Baranov <const@tltsu.ru>
* Report by Andreas Koenecke.
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 2654f75a4c46..b20ffe23a09b 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -40,8 +40,6 @@ struct inode;
struct dentry;
struct user_namespace;
-struct user_namespace *current_user_ns(void);
-
extern const kernel_cap_t __cap_empty_set;
extern const kernel_cap_t __cap_init_eff_set;
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 8d70e1361ecd..257db64562e5 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -377,7 +377,10 @@ extern struct user_namespace init_user_ns;
#ifdef CONFIG_USER_NS
#define current_user_ns() (current_cred_xxx(user_ns))
#else
-#define current_user_ns() (&init_user_ns)
+static inline struct user_namespace *current_user_ns(void)
+{
+ return &init_user_ns;
+}
#endif
diff --git a/kernel/cpu.c b/kernel/cpu.c
index cd6d1258554e..40d20bf5de28 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -223,10 +223,6 @@ static int cpu_notify(unsigned long val, void *v)
return __cpu_notify(val, v, -1, NULL);
}
-static void cpu_notify_nofail(unsigned long val, void *v)
-{
- BUG_ON(cpu_notify(val, v));
-}
EXPORT_SYMBOL(register_cpu_notifier);
EXPORT_SYMBOL(__register_cpu_notifier);
@@ -245,6 +241,11 @@ void __unregister_cpu_notifier(struct notifier_block *nb)
EXPORT_SYMBOL(__unregister_cpu_notifier);
#ifdef CONFIG_HOTPLUG_CPU
+static void cpu_notify_nofail(unsigned long val, void *v)
+{
+ BUG_ON(cpu_notify(val, v));
+}
+
/**
* clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
* @cpu: a CPU id
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index f6aae7977824..d2a20e83ebae 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -871,6 +871,9 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
int cpu = smp_processor_id();
+ if (!bc)
+ return;
+
/* Set it up only once ! */
if (bc->event_handler != tick_handle_oneshot_broadcast) {
int was_periodic = clockevent_state_periodic(bc);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index e1225b395415..ea5dfefd765a 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2699,7 +2699,7 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2);
int hw_headroom = sdata->local->hw.extra_tx_headroom;
struct ethhdr eth;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_tx_info *info;
struct ieee80211_hdr *hdr = (void *)fast_tx->hdr;
struct ieee80211_tx_data tx;
ieee80211_tx_result r;
@@ -2761,6 +2761,7 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
memcpy(skb->data + fast_tx->da_offs, eth.h_dest, ETH_ALEN);
memcpy(skb->data + fast_tx->sa_offs, eth.h_source, ETH_ALEN);
+ info = IEEE80211_SKB_CB(skb);
memset(info, 0, sizeof(*info));
info->band = fast_tx->band;
info->control.vif = &sdata->vif;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3b2687889cd5..00c50d58f108 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2230,6 +2230,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_FIXUP_ASUS_W2JC),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
+ SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
@@ -6892,6 +6893,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x15a7, "ASUS UX51VZH", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x177d, "ASUS N551", ALC668_FIXUP_ASUS_Nx51),
SND_PCI_QUIRK(0x1043, 0x17bd, "ASUS N751", ALC668_FIXUP_ASUS_Nx51),
+ SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71SL", ALC662_FIXUP_ASUS_MODE8),
SND_PCI_QUIRK(0x1043, 0x1b73, "ASUS N55SF", ALC662_FIXUP_BASS_16),
SND_PCI_QUIRK(0x1043, 0x1bf3, "ASUS N76VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index e163b0148c4b..fd6e247d9fd8 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1027,12 +1027,13 @@ static int samsung_i2s_dai_probe(struct snd_soc_dai *dai)
static int samsung_i2s_dai_remove(struct snd_soc_dai *dai)
{
struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai);
+ unsigned long flags;
if (!is_secondary(i2s)) {
if (i2s->quirks & QUIRK_NEED_RSTCLR) {
- spin_lock(i2s->lock);
+ spin_lock_irqsave(i2s->lock, flags);
writel(0, i2s->addr + I2SCON);
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
}
}
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 1f09d9591276..a1cbaa5f7fc9 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -202,7 +202,6 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
if (! snd_usb_parse_audio_interface(chip, interface)) {
usb_set_interface(dev, interface, 0); /* reset the current interface */
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
- return -EINVAL;
}
return 0;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index c07a7eda42a2..be1f511e4f54 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -538,6 +538,11 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
alive, ep->ep_num);
clear_bit(EP_FLAG_STOPPING, &ep->flags);
+ ep->data_subs = NULL;
+ ep->sync_slave = NULL;
+ ep->retire_data_urb = NULL;
+ ep->prepare_data_urb = NULL;
+
return 0;
}
@@ -902,9 +907,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
/**
* snd_usb_endpoint_start: start an snd_usb_endpoint
*
- * @ep: the endpoint to start
- * @can_sleep: flag indicating whether the operation is executed in
- * non-atomic context
+ * @ep: the endpoint to start
*
* A call to this function will increment the use count of the endpoint.
* In case it is not already running, the URBs for this endpoint will be
@@ -914,7 +917,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
*
* Returns an error if the URB submission failed, 0 in all other cases.
*/
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
{
int err;
unsigned int i;
@@ -928,8 +931,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep)
/* just to be sure */
deactivate_urbs(ep, false);
- if (can_sleep)
- wait_clear_urbs(ep);
ep->active_mask = 0;
ep->unlink_mask = 0;
@@ -1010,10 +1011,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
if (--ep->use_count == 0) {
deactivate_urbs(ep, false);
- ep->data_subs = NULL;
- ep->sync_slave = NULL;
- ep->retire_data_urb = NULL;
- ep->prepare_data_urb = NULL;
set_bit(EP_FLAG_STOPPING, &ep->flags);
}
}
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index 6428392d8f62..584f295d7c77 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -18,7 +18,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep);
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, bool can_sleep);
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep);
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 44d178ee9177..48afae053c56 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -218,7 +218,7 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
}
}
-static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
+static int start_endpoints(struct snd_usb_substream *subs)
{
int err;
@@ -231,7 +231,7 @@ static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
dev_dbg(&subs->dev->dev, "Starting data EP @%p\n", ep);
ep->data_subs = subs;
- err = snd_usb_endpoint_start(ep, can_sleep);
+ err = snd_usb_endpoint_start(ep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags);
return err;
@@ -260,7 +260,7 @@ static int start_endpoints(struct snd_usb_substream *subs, bool can_sleep)
dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
ep->sync_slave = subs->data_endpoint;
- err = snd_usb_endpoint_start(ep, can_sleep);
+ err = snd_usb_endpoint_start(ep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
return err;
@@ -839,7 +839,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- ret = start_endpoints(subs, true);
+ ret = start_endpoints(subs);
unlock:
snd_usb_unlock_shutdown(subs->stream->chip);
@@ -1655,7 +1655,7 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- err = start_endpoints(subs, false);
+ err = start_endpoints(subs);
if (err < 0)
return err;
prev parent reply other threads:[~2017-01-12 10:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-12 10:36 Linux 4.4.42 Greg KH
2017-01-12 10:36 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170112103633.GB21745@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.