diff for duplicates of <20170112171135.7822-1-codekipper@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 3f95122..0b32128 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,11 +1,11 @@ -From: Marcus Cooper <codekipper@gmail.com> +From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, HDMI, an IR receiver, 1 LEDs and an optical S/PDIF connector. -Signed-off-by: Marcus Cooper <codekipper@gmail.com> +Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 187 ++++++++++++++++++++++++++++++ @@ -31,7 +31,7 @@ index 000000000000..bc5aed52cb1d +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,187 @@ +/* -+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> ++ * Copyright (C) 2017 Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual @@ -158,7 +158,7 @@ index 000000000000..bc5aed52cb1d + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ -+ rtl8189ftv: sdio_wifi at 1 { ++ rtl8189ftv: sdio_wifi@1 { + reg = <1>; + }; +}; @@ -185,12 +185,12 @@ index 000000000000..bc5aed52cb1d +}; + +&r_pio { -+ pwr_led_x2: led_pins at 0 { ++ pwr_led_x2: led_pins@0 { + pins = "PL10"; + function = "gpio_out"; + }; + -+ sw_r_x2: key_pins at 0 { ++ sw_r_x2: key_pins@0 { + pins = "PL3"; + function = "gpio_in"; + }; diff --git a/a/content_digest b/N1/content_digest index 342d5a4..5a65358 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,17 +1,21 @@ - "From\0codekipper@gmail.com (codekipper at gmail.com)\0" - "Subject\0[linux-sunxi][PATCH] ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB\0" + "From\0codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "Subject\0[PATCH] ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB\0" "Date\0Thu, 12 Jan 2017 18:11:35 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + " Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "\00:1\0" "b\0" - "From: Marcus Cooper <codekipper@gmail.com>\n" + "From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "\n" "The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot,\n" "2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the\n" "SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, HDMI, an IR\n" "receiver, 1 LEDs and an optical S/PDIF connector.\n" "\n" - "Signed-off-by: Marcus Cooper <codekipper@gmail.com>\n" + "Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/Makefile | 1 +\n" " arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 187 ++++++++++++++++++++++++++++++\n" @@ -37,7 +41,7 @@ "+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts\n" "@@ -0,0 +1,187 @@\n" "+/*\n" - "+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>\n" + "+ * Copyright (C) 2017 Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "+ *\n" "+ * This file is dual-licensed: you can use it either under the terms\n" "+ * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -164,7 +168,7 @@ "+\t * Explicitly define the sdio device, so that we can add an ethernet\n" "+\t * alias for it (which e.g. makes u-boot set a mac-address).\n" "+\t */\n" - "+\trtl8189ftv: sdio_wifi at 1 {\n" + "+\trtl8189ftv: sdio_wifi@1 {\n" "+\t\treg = <1>;\n" "+\t};\n" "+};\n" @@ -191,12 +195,12 @@ "+};\n" "+\n" "+&r_pio {\n" - "+\tpwr_led_x2: led_pins at 0 {\n" + "+\tpwr_led_x2: led_pins@0 {\n" "+\t\tpins = \"PL10\";\n" "+\t\tfunction = \"gpio_out\";\n" "+\t};\n" "+\n" - "+\tsw_r_x2: key_pins at 0 {\n" + "+\tsw_r_x2: key_pins@0 {\n" "+\t\tpins = \"PL3\";\n" "+\t\tfunction = \"gpio_in\";\n" "+\t};\n" @@ -226,4 +230,4 @@ "-- \n" 2.11.0 -8a2370f72ac3e18e79005b3eca3afabe26530ade42b7247bb1244e541fa746aa +3159f55bfe47ddeff81dc205112b6835a2ec6e9a3b41c51d282bf2e7019137ca
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.