From: "Bill O'Donnell" <billodo@redhat.com>
To: Jan Tulak <jtulak@redhat.com>
Cc: linux-xfs@vger.kernel.org
Subject: Re: [PATCH 07/22] mkfs: Move opts related #define to one place
Date: Fri, 13 Jan 2017 15:19:00 -0600 [thread overview]
Message-ID: <20170113211900.GB4176@redhat.com> (raw)
In-Reply-To: <1481117249-21273-8-git-send-email-jtulak@redhat.com>
On Wed, Dec 07, 2016 at 02:27:14PM +0100, Jan Tulak wrote:
> Takes all the "#define M_CRC x" from struct opt_params declaration and moves
> them into a single place before the struct. This is because we need to
> cross-link conflicts and we can't link -l version to -m crc if M_CRC is defined
> after the conflict section.
>
> Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
> ---
> mkfs/xfs_mkfs.c | 138 ++++++++++++++++++++++++++++++--------------------------
> 1 file changed, 74 insertions(+), 64 deletions(-)
>
> diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
> index e46b55c..2122d1c 100644
> --- a/mkfs/xfs_mkfs.c
> +++ b/mkfs/xfs_mkfs.c
> @@ -48,6 +48,80 @@ unsigned int sectorsize;
> #define MAX_CONFLICTS 8
> #define LAST_CONFLICT (-1)
>
> +#define OPT_B 0
> +#define B_LOG 0
> +#define B_SIZE 1
> +
> +#define OPT_D 1
> +#define D_AGCOUNT 0
> +#define D_FILE 1
> +#define D_NAME 2
> +#define D_SIZE 3
> +#define D_SUNIT 4
> +#define D_SWIDTH 5
> +#define D_AGSIZE 6
> +#define D_SU 7
> +#define D_SW 8
> +#define D_SECTLOG 9
> +#define D_SECTSIZE 10
> +#define D_NOALIGN 11
> +#define D_RTINHERIT 12
> +#define D_PROJINHERIT 13
> +#define D_EXTSZINHERIT 14
> +
> +
> +#define OPT_I 2
> +#define I_ALIGN 0
> +#define I_LOG 1
> +#define I_MAXPCT 2
> +#define I_PERBLOCK 3
> +#define I_SIZE 4
> +#define I_ATTR 5
> +#define I_PROJID32BIT 6
> +#define I_SPINODES 7
> +
> +#define OPT_L 3
> +#define L_AGNUM 0
> +#define L_INTERNAL 1
> +#define L_SIZE 2
> +#define L_VERSION 3
> +#define L_SUNIT 4
> +#define L_SU 5
> +#define L_DEV 6
> +#define L_SECTLOG 7
> +#define L_SECTSIZE 8
> +#define L_FILE 9
> +#define L_NAME 10
> +#define L_LAZYSBCNTR 11
> +
> +
> +#define OPT_N 4
> +#define N_LOG 0
> +#define N_SIZE 1
> +#define N_VERSION 2
> +#define N_FTYPE 3
> +
> +#define OPT_R 5
> +#define R_EXTSIZE 0
> +#define R_SIZE 1
> +#define R_DEV 2
> +#define R_FILE 3
> +#define R_NAME 4
> +#define R_NOALIGN 5
> +
> +#define OPT_S 6
> +#define S_LOG 0
> +#define S_SECTLOG 1
> +#define S_SIZE 2
> +#define S_SECTSIZE 3
> +
> +#define OPT_M 7
> +#define M_CRC 0
> +#define M_FINOBT 1
> +#define M_UUID 2
> +#define M_RMAPBT 3
> +#define M_REFLINK 4
> +
> /*
> * Table for parsing mkfs parameters.
> *
> @@ -155,14 +229,11 @@ struct opt_params {
> long long value;
> } subopt_params[MAX_SUBOPTS];
> } opts[MAX_OPTS] = {
> -#define OPT_B 0
> {
> .index = OPT_B,
> .name = 'b',
> .subopts = {
> -#define B_LOG 0
> "log",
> -#define B_SIZE 1
> "size",
> NULL
> },
> @@ -185,40 +256,24 @@ struct opt_params {
> },
> },
> },
> -#define OPT_D 1
> {
> .index = OPT_D,
> .name = 'd',
> .subopts = {
> - #define D_AGCOUNT 0
> "agcount",
> - #define D_FILE 1
> "file",
> - #define D_NAME 2
> "name",
> - #define D_SIZE 3
> "size",
> - #define D_SUNIT 4
> "sunit",
> - #define D_SWIDTH 5
> "swidth",
> - #define D_AGSIZE 6
> "agsize",
> - #define D_SU 7
> "su",
> - #define D_SW 8
> "sw",
> - #define D_SECTLOG 9
> "sectlog",
> - #define D_SECTSIZE 10
> "sectsize",
> - #define D_NOALIGN 11
> "noalign",
> - #define D_RTINHERIT 12
> "rtinherit",
> - #define D_PROJINHERIT 13
> "projinherit",
> - #define D_EXTSZINHERIT 14
> "extszinherit",
> NULL
> },
> @@ -338,26 +393,17 @@ struct opt_params {
> },
> },
> },
> -#define OPT_I 2
> {
> .index = OPT_I,
> .name = 'i',
> .subopts = {
> -#define I_ALIGN 0
> "align",
> -#define I_LOG 1
> "log",
> -#define I_MAXPCT 2
> "maxpct",
> -#define I_PERBLOCK 3
> "perblock",
> -#define I_SIZE 4
> "size",
> -#define I_ATTR 5
> "attr",
> -#define I_PROJID32BIT 6
> "projid32bit",
> -#define I_SPINODES 7
> "sparse",
> NULL
> },
> @@ -420,34 +466,21 @@ struct opt_params {
> },
> },
> },
> -#define OPT_L 3
> {
> .index = OPT_L,
> .name = 'l',
> .subopts = {
> - #define L_AGNUM 0
> "agnum",
> - #define L_INTERNAL 1
> "internal",
> - #define L_SIZE 2
> "size",
> - #define L_VERSION 3
> "version",
> - #define L_SUNIT 4
> "sunit",
> - #define L_SU 5
> "su",
> - #define L_DEV 6
> "logdev",
> - #define L_SECTLOG 7
> "sectlog",
> - #define L_SECTSIZE 8
> "sectsize",
> - #define L_FILE 9
> "file",
> - #define L_NAME 10
> "name",
> - #define L_LAZYSBCNTR 11
> "lazy-count",
> NULL
> },
> @@ -538,18 +571,13 @@ struct opt_params {
> },
> },
> },
> -#define OPT_N 4
> {
> .index = OPT_N,
> .name = 'n',
> .subopts = {
> - #define N_LOG 0
> "log",
> - #define N_SIZE 1
> "size",
> - #define N_VERSION 2
> "version",
> - #define N_FTYPE 3
> "ftype",
> NULL,
> },
> @@ -584,22 +612,15 @@ struct opt_params {
> },
> },
> },
> -#define OPT_R 5
> {
> .index = OPT_R,
> .name = 'r',
> .subopts = {
> - #define R_EXTSIZE 0
> "extsize",
> - #define R_SIZE 1
> "size",
> - #define R_DEV 2
> "rtdev",
> - #define R_FILE 3
> "file",
> - #define R_NAME 4
> "name",
> - #define R_NOALIGN 5
> "noalign",
> NULL
> },
> @@ -640,18 +661,13 @@ struct opt_params {
> },
> },
> },
> -#define OPT_S 6
> {
> .index = OPT_S,
> .name = 's',
> .subopts = {
> - #define S_LOG 0
> "log",
> - #define S_SECTLOG 1
> "sectlog",
> - #define S_SIZE 2
> "size",
> - #define S_SECTSIZE 3
> "sectsize",
> NULL
> },
> @@ -694,20 +710,14 @@ struct opt_params {
> },
> },
> },
> -#define OPT_M 7
> {
> .index = OPT_M,
> .name = 'm',
> .subopts = {
> - #define M_CRC 0
> "crc",
> - #define M_FINOBT 1
> "finobt",
> - #define M_UUID 2
> "uuid",
> - #define M_RMAPBT 3
> "rmapbt",
> - #define M_REFLINK 4
> "reflink",
> NULL
> },
> --
> 2.8.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-xfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-13 21:19 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-07 13:27 [RFC PATCH 00/22] mkfs.xfs: Make stronger conflict checks Jan Tulak
2016-12-07 13:27 ` [PATCH 01/22] mkfs: remove intermediate getstr followed by getnum Jan Tulak
2017-01-13 16:56 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 02/22] mkfs: merge tables for opts parsing into one table Jan Tulak
2017-01-13 16:57 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 03/22] mkfs: extend opt_params with a value field Jan Tulak
2017-01-13 16:55 ` Bill O'Donnell
2017-01-16 12:42 ` Jan Tulak
2016-12-07 13:27 ` [PATCH 04/22] mkfs: change conflicts array into a table capable of cross-option addressing Jan Tulak
2017-01-13 17:56 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 05/22] mkfs: add a check for conflicting values Jan Tulak
2017-01-13 17:58 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 06/22] mkfs: add cross-section conflict checks Jan Tulak
2017-01-13 21:18 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 07/22] mkfs: Move opts related #define to one place Jan Tulak
2017-01-13 21:19 ` Bill O'Donnell [this message]
2016-12-07 13:27 ` [PATCH 08/22] mkfs: move conflicts into the table Jan Tulak
2017-01-13 21:20 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 09/22] mkfs: change conflict checks to utilize the new conflict structure Jan Tulak
2017-01-13 17:08 ` Bill O'Donnell
2017-01-16 12:42 ` Jan Tulak
2016-12-07 13:27 ` [PATCH 10/22] mkfs: change when to mark an option as seen Jan Tulak
2017-01-13 21:20 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 11/22] mkfs: add test_default_value into conflict struct Jan Tulak
2017-01-13 21:21 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 12/22] mkfs: expand conflicts declarations to named declaration Jan Tulak
2017-01-13 17:21 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 13/22] mkfs: remove zeroed items from conflicts declaration Jan Tulak
2017-01-16 14:13 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 14/22] mkfs: rename defaultval to flagval in opts Jan Tulak
2017-01-16 14:14 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 15/22] mkfs: replace SUBOPT_NEEDS_VAL for a flag Jan Tulak
2017-01-16 14:14 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 16/22] mkfs: Change all value fields in opt structures into unions Jan Tulak
2017-01-13 17:36 ` Bill O'Donnell
2017-01-16 12:44 ` Jan Tulak
2016-12-07 13:27 ` [PATCH 17/22] mkfs: use old variables as pointers to the new opts struct values Jan Tulak
2017-01-13 17:43 ` Bill O'Donnell
2017-01-16 12:45 ` Jan Tulak
2016-12-07 13:27 ` [PATCH 18/22] mkfs: prevent sector/blocksize to be specified as a number of blocks Jan Tulak
2017-01-16 14:15 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 19/22] mkfs: subopt flags should be saved as bool Jan Tulak
2017-01-16 14:16 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 20/22] mkfs: move uuid empty string test to getstr() Jan Tulak
2017-01-16 14:16 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 21/22] mkfs: remove duplicit checks Jan Tulak
2017-01-16 14:17 ` Bill O'Donnell
2016-12-07 13:27 ` [PATCH 22/22] mkfs: prevent multiple specifications of a single option Jan Tulak
2017-01-16 14:18 ` Bill O'Donnell
2017-01-06 11:42 ` [RFC PATCH 00/22] mkfs.xfs: Make stronger conflict checks Jan Tulak
2017-01-09 19:43 ` Eric Sandeen
2017-01-10 9:47 ` Jan Tulak
2017-01-12 15:46 ` Bill O'Donnell
2017-01-16 20:14 ` Bill O'Donnell
-- strict thread matches above, loose matches on Subject: below --
2017-03-15 15:59 [PATCH " Jan Tulak
2017-03-15 16:00 ` [PATCH 07/22] mkfs: Move opts related #define to one place Jan Tulak
2017-03-16 23:25 ` Luis R. Rodriguez
2017-03-17 12:11 ` Jan Tulak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170113211900.GB4176@redhat.com \
--to=billodo@redhat.com \
--cc=jtulak@redhat.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.