All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alison Schofield <amsfield22@gmail.com>
To: jic23@kernel.org
Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Michael.Hennerich@analog.com, gregkh@linuxfoundation.org,
	devel@driverdev.osuosl.org
Subject: [PATCH v2] iio: trigger: free trigger resource correctly
Date: Thu, 19 Jan 2017 19:47:38 -0800	[thread overview]
Message-ID: <20170120034730.GA8864@d830.WORKGROUP> (raw)

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
---
Changes in v2:
Renamed probe jump label to say free instead of put.
Added further explanation to commit log.

Note from v1:
Patches to use devm_* funcs are ready to follow this for
the interrupt & bfin-timer triggers.


 drivers/iio/trigger/iio-trig-interrupt.c          | 8 ++++----
 drivers/iio/trigger/iio-trig-sysfs.c              | 2 +-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c
index 572bc6f..e18f12b 100644
--- a/drivers/iio/trigger/iio-trig-interrupt.c
+++ b/drivers/iio/trigger/iio-trig-interrupt.c
@@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
 	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
 	if (!trig_info) {
 		ret = -ENOMEM;
-		goto error_put_trigger;
+		goto error_free_trigger;
 	}
 	iio_trigger_set_drvdata(trig, trig_info);
 	trig_info->irq = irq;
@@ -83,8 +83,8 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
 	free_irq(irq, trig);
 error_free_trig_info:
 	kfree(trig_info);
-error_put_trigger:
-	iio_trigger_put(trig);
+error_free_trigger:
+	iio_trigger_free(trig);
 error_ret:
 	return ret;
 }
@@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev)
 	iio_trigger_unregister(trig);
 	free_irq(trig_info->irq, trig);
 	kfree(trig_info);
-	iio_trigger_put(trig);
+	iio_trigger_free(trig);
 
 	return 0;
 }
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index 3dfab2b..202e8b8 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int id)
 	return 0;
 
 out2:
-	iio_trigger_put(t->trig);
+	iio_trigger_free(t->trig);
 free_t:
 	kfree(t);
 out1:
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 9658f20..4e0b4ee 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -260,7 +260,7 @@ static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 out1:
 	iio_trigger_unregister(st->trig);
 out:
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 	return ret;
 }
 
@@ -273,7 +273,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 		peripheral_free(st->t->pin);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 
 	return 0;
 }
-- 
2.1.4


             reply	other threads:[~2017-01-20  3:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20  3:47 Alison Schofield [this message]
2017-01-22 14:25 ` [PATCH v2] iio: trigger: free trigger resource correctly Jonathan Cameron
2017-01-22 15:56   ` Lars-Peter Clausen
2017-01-22 16:15     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170120034730.GA8864@d830.WORKGROUP \
    --to=amsfield22@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.