[EXAMPLE V2 3/2] ARM: BCM53573: Specify ports for USB LED for Tenda AC9

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
This patch *should not* be applied. It's only an EXAMPLE and that's why it uses
weird 3/2 number.

It's a proof of concept, it was tested & will be submitted through ARM tree if
previous patches get accepted.
---
 arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 4403ae8790c2..f484d17a2270 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -24,6 +24,7 @@
 		compatible = "gpio-leds";
 
 		usb {
+			led-triggers = <&ohci_port1>, <&ehci_port1>;
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
-- 
2.11.0