From mboxrd@z Thu Jan 1 00:00:00 1970 Content-Type: multipart/mixed; boundary="===============4470850876828756983==" MIME-Version: 1.0 From: Piotr Haber Subject: [PATCH 3/4] doc: description of Telit LE910V2 network setup Date: Wed, 25 Jan 2017 11:41:27 +0100 Message-ID: <20170125104128.5254-4-gluedig@gmail.com> In-Reply-To: <20170125104128.5254-1-gluedig@gmail.com> List-Id: To: ofono@ofono.org --===============4470850876828756983== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable NCM network interface on LE910V2 modem needs to be configured in a specific way after connection is established. --- doc/telit-modem.txt | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/doc/telit-modem.txt b/doc/telit-modem.txt index 1627fb4c..d4d367d7 100644 --- a/doc/telit-modem.txt +++ b/doc/telit-modem.txt @@ -17,3 +17,30 @@ GPS: After setting the configuration, a power cycle is required. Port Configiuration #8 is available since firmware 12.00.004. Firmware v= ersion can be checked using 'AT+CGMR'. + +LE910 V2 +=3D=3D=3D=3D=3D=3D=3D=3D + +Default USB composition of LE910V2 uses PID 0x36 (AT#PORTCFG=3D0) +and consists of 6 serial ports (CDC-ACM standard, /dev/ttyACMx) +and 1 network adapter using CDC-NCM standard (wwanx or usbx). + +NCM interface configuration follows Telit documentation +(both documents available on Telit Download Zone - registration required) +"GE/HE/UE910, UL865, LE910 V2 Linux USB Driver - User Guide r0" +(document 1VV0301255 Rev.0 - 2016-01-22) +and "Telit LE910-V2 NCM SETUP r3" +(document 1VV0301246 Rev.3 - 2016-11-29). + +After context is setup, NCM mode activated and PDP context activated +connection configuration can be read using +AT+CGPADDR=3Dcontext_id and AT+CGCONTRDP=3Dcontext_id commands. +This is done automatically and results available via +org.ofono.ConnectionContext.GetProperties DBus method. + +Then Linux network interface needs to be configured: + ifconfig
netmask up + route add default gw + arp -s 11:22:33:44:55:66 + +Only after these steps network interface is usable. -- = 2.11.0 --===============4470850876828756983==--