diff for duplicates of <20170126194804.23789-1-codekipper@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 5359027..65175ac 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,11 +1,11 @@ -From: Marcus Cooper <codekipper@gmail.com> +From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. -Signed-off-by: Marcus Cooper <codekipper@gmail.com> +Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- Changes since v2 - Comment for red led gpio was wrong @@ -39,7 +39,7 @@ index 000000000000..2a016cd16a27 +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -0,0 +1,136 @@ +/* -+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> ++ * Copyright (C) 2017 Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual @@ -155,7 +155,7 @@ index 000000000000..2a016cd16a27 + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ -+ sdiowifi: sdio_wifi at 1 { ++ sdiowifi: sdio_wifi@1 { + reg = <1>; + }; +}; diff --git a/a/content_digest b/N1/content_digest index 9cdc3d5..09ce6e9 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,17 +1,21 @@ - "From\0codekipper@gmail.com (codekipper at gmail.com)\0" - "Subject\0[linux-sunxi][PATCH v3] ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB\0" + "From\0codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "Subject\0[PATCH v3] ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB\0" "Date\0Thu, 26 Jan 2017 20:48:04 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + " Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" "\00:1\0" "b\0" - "From: Marcus Cooper <codekipper@gmail.com>\n" + "From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "\n" "The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot,\n" "2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the\n" "SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a\n" "dual colour LED and an optical S/PDIF connector.\n" "\n" - "Signed-off-by: Marcus Cooper <codekipper@gmail.com>\n" + "Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "---\n" "Changes since v2\n" " - Comment for red led gpio was wrong\n" @@ -45,7 +49,7 @@ "+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts\n" "@@ -0,0 +1,136 @@\n" "+/*\n" - "+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>\n" + "+ * Copyright (C) 2017 Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "+ *\n" "+ * This file is dual-licensed: you can use it either under the terms\n" "+ * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -161,7 +165,7 @@ "+\t * Explicitly define the sdio device, so that we can add an ethernet\n" "+\t * alias for it (which e.g. makes u-boot set a mac-address).\n" "+\t */\n" - "+\tsdiowifi: sdio_wifi at 1 {\n" + "+\tsdiowifi: sdio_wifi@1 {\n" "+\t\treg = <1>;\n" "+\t};\n" "+};\n" @@ -183,4 +187,4 @@ "-- \n" 2.11.0 -0a1a3969792a06c2b34d041e801bb9ef274cff75f38c103226a07eb908e25698 +0a086b2ce5a18d53d6e573076298c4a717c5acce67bfcd45cb0626ae3c66e625
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.