From: Richard Cochran <richardcochran@gmail.com>
To: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, Yuval.Mintz@cavium.com
Subject: Re: [PATCH net-next v2 1/2] qed: Add infrastructure for PTP support.
Date: Sun, 29 Jan 2017 16:28:12 +0100 [thread overview]
Message-ID: <20170129152812.GB2223@localhost.localdomain> (raw)
In-Reply-To: <1485674903-27689-2-git-send-email-Sudarsana.Kalluru@cavium.com>
On Sat, Jan 28, 2017 at 11:28:22PM -0800, Sudarsana Kalluru wrote:
> +/* Adjust the HW clock by a rate given in parts-per-million (ppm) units.
> + * FW/HW accepts the adjustment value in terms of 3 parameters:
> + * Drift period - adjustment happens once in certain number of nano seconds.
> + * Drift value - time is adjusted by a certain value, for example by 5 ns.
> + * Drift direction - add or subtract the adjustment value.
> + * The routine translates ppm into the adjustment triplet in an optimal manner.
> + */
> +static int qed_ptp_hw_adjfreq(struct qed_dev *cdev, s32 ppb)
> +{
> + struct qed_hwfn *p_hwfn = QED_LEADING_HWFN(cdev);
> + s64 period, period1, period2, dif, dif1, dif2;
> + struct qed_ptt *p_ptt = p_hwfn->p_ptp_ptt;
> + int drift_dir, best_val, best_period;
> + s64 best_dif, temp, val;
> + u32 drift_ctr_cfg = 0;
> + u32 drift_state;
> +
> + best_dif = 1000000000;
> + best_period = 1;
> + best_val = 0;
> + drift_dir = 1;
> +
> + if (ppb < 0) {
> + ppb = -ppb;
> + drift_dir = 0;
> + }
> +
> + if (ppb == 0) {
> + /* No clock adjustment required */
> + best_val = 0;
> + best_period = 0xFFFFFFF;
> + } else {
> + /* Adjustment value is up to +/-7ns, find an optimal value in
> + * this range.
> + */
> + for (val = 0; val <= 7; val++) {
> + period1 = val * 1000000000;
> + do_div(period1, ppb);
One,
> + period1 -= 8;
> + do_div(period1, 16);
two,
> + if (period1 < 1)
> + period1 = 1;
> + if (period1 > 0xFFFFFFE)
> + period1 = 0xFFFFFFE;
> + period2 = period1 + 1;
> +
> + temp = val * 1000000000;
> + do_div(temp, (period1 * 16 + 8));
three,
> + dif1 = ppb - temp;
> + if (dif1 < 0)
> + dif1 = -dif1;
> +
> + temp = val * 1000000000;
> + do_div(temp, (period2 * 16 + 8));
four times seven makes twenty-eight 64 bit divisions per adjustment!
Isn't there a smarter way to do this?
Also, the case where val=0 makes little sense.
Thanks,
Richard
> + dif2 = ppb - temp;
> + if (dif2 < 0)
> + dif2 = -dif2;
> +
> + dif = min_t(s64, dif1, dif2);
> + period = (dif1 < dif2) ? period1 : period2;
> + if (dif < best_dif) {
> + best_dif = dif;
> + best_val = (int)val;
> + best_period = (int)period;
> + }
> + }
> + }
> +
> + drift_ctr_cfg = (best_period << QED_DRIFT_CNTR_TIME_QUANTA_SHIFT) |
> + (best_val << QED_DRIFT_CNTR_ADJUSTMENT_SHIFT) |
> + (drift_dir << QED_DRIFT_CNTR_DIRECTION_SHIFT);
> +
> + qed_wr(p_hwfn, p_ptt, NIG_REG_TSGEN_RST_DRIFT_CNTR, 0x1);
> +
> + drift_state = qed_rd(p_hwfn, p_ptt, NIG_REG_TSGEN_RST_DRIFT_CNTR);
> + if (drift_state & 1) {
> + qed_wr(p_hwfn, p_ptt, NIG_REG_TSGEN_DRIFT_CNTR_CONF,
> + drift_ctr_cfg);
> + } else {
> + DP_INFO(p_hwfn, "Drift counter is not reset\n");
> + return -EINVAL;
> + }
> +
> + qed_wr(p_hwfn, p_ptt, NIG_REG_TSGEN_RST_DRIFT_CNTR, 0x0);
> +
> + return 0;
> +}
next prev parent reply other threads:[~2017-01-29 15:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-29 7:28 [PATCH net-next v2 0/2] qed*: Add support for PTP Sudarsana Kalluru
2017-01-29 7:28 ` [PATCH net-next v2 1/2] qed: Add infrastructure for PTP support Sudarsana Kalluru
2017-01-29 8:32 ` kbuild test robot
2017-01-29 15:28 ` Richard Cochran [this message]
2017-01-29 15:31 ` Richard Cochran
2017-01-29 17:26 ` Mintz, Yuval
2017-01-29 20:51 ` Richard Cochran
2017-01-29 21:36 ` Mintz, Yuval
2017-01-30 13:26 ` Richard Cochran
2017-01-30 18:00 ` Mintz, Yuval
2017-01-29 7:28 ` [PATCH net-next v2 2/2] qede: Add driver support for PTP Sudarsana Kalluru
2017-01-29 15:35 ` Richard Cochran
2017-01-29 17:30 ` Mintz, Yuval
2017-01-29 21:02 ` Richard Cochran
2017-01-29 21:40 ` Mintz, Yuval
2017-01-30 14:34 ` David Laight
2017-01-30 17:55 ` Mintz, Yuval
2017-01-31 10:03 ` David Laight
2017-01-31 14:31 ` Mintz, Yuval
2017-01-31 14:53 ` Richard Cochran
2017-01-31 15:08 ` Mintz, Yuval
2017-01-31 17:43 ` Richard Cochran
2017-01-29 15:09 ` [PATCH net-next v2 0/2] qed*: Add " Richard Cochran
2017-01-29 17:23 ` Mintz, Yuval
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170129152812.GB2223@localhost.localdomain \
--to=richardcochran@gmail.com \
--cc=Sudarsana.Kalluru@cavium.com \
--cc=Yuval.Mintz@cavium.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.