From: Johan Hovold <johan@kernel.org>
To: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 1/2] HID: cp2112: fix sleep-while-atomic
Date: Mon, 30 Jan 2017 11:26:38 +0100 [thread overview]
Message-ID: <20170130102639.3832-1-johan@kernel.org> (raw)
In-Reply-To: <20170130102235.3691-1-johan@kernel.org>
A recent commit fixing DMA-buffers on stack added a shared transfer
buffer protected by a spinlock. This is broken as the USB HID request
callbacks can sleep. Fix this up by replacing the spinlock with a mutex.
Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/hid/hid-cp2112.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index f31a778b0851..3e0b6bad29f2 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -168,7 +168,7 @@ struct cp2112_device {
atomic_t xfer_avail;
struct gpio_chip gc;
u8 *in_out_buffer;
- spinlock_t lock;
+ struct mutex lock;
struct gpio_desc *desc[8];
bool gpio_poll;
@@ -186,10 +186,9 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
@@ -213,7 +212,7 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
ret = 0;
exit:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret <= 0 ? ret : -EIO;
}
@@ -222,10 +221,9 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
buf[0] = CP2112_GPIO_SET;
buf[1] = value ? 0xff : 0;
@@ -237,7 +235,7 @@ static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
if (ret < 0)
hid_err(hdev, "error setting GPIO values: %d\n", ret);
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
}
static int cp2112_gpio_get_all(struct gpio_chip *chip)
@@ -245,10 +243,9 @@ static int cp2112_gpio_get_all(struct gpio_chip *chip)
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf,
CP2112_GPIO_GET_LENGTH, HID_FEATURE_REPORT,
@@ -262,7 +259,7 @@ static int cp2112_gpio_get_all(struct gpio_chip *chip)
ret = buf[1];
exit:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret;
}
@@ -284,10 +281,9 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
struct cp2112_device *dev = gpiochip_get_data(chip);
struct hid_device *hdev = dev->hdev;
u8 *buf = dev->in_out_buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dev->lock, flags);
+ mutex_lock(&dev->lock);
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
@@ -308,7 +304,7 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
goto fail;
}
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
/*
* Set gpio value when output direction is already set,
@@ -319,7 +315,7 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
return 0;
fail:
- spin_unlock_irqrestore(&dev->lock, flags);
+ mutex_unlock(&dev->lock);
return ret < 0 ? ret : -EIO;
}
@@ -1235,7 +1231,7 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (!dev->in_out_buffer)
return -ENOMEM;
- spin_lock_init(&dev->lock);
+ mutex_init(&dev->lock);
ret = hid_parse(hdev);
if (ret) {
--
2.10.2
next prev parent reply other threads:[~2017-01-30 10:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-30 10:22 [PATCH 0/2] HID: cp2112: fix sleep-while-atomic regression Johan Hovold
2017-01-30 10:26 ` Johan Hovold [this message]
2017-01-30 10:26 ` [PATCH 2/2] HID: cp2112: fix gpio-callback error handling Johan Hovold
2017-01-30 12:45 ` [PATCH 0/2] HID: cp2112: fix sleep-while-atomic regression Benjamin Tissoires
2017-01-31 12:06 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170130102639.3832-1-johan@kernel.org \
--to=johan@kernel.org \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.