All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>
Cc: linux-rdma@vger.kernel.org, Erez Shitrit <erezsh@mellanox.com>,
	"# v4 . 8+" <stable@vger.kernel.org>,
	Noa Osherovich <noaos@mellanox.com>
Subject: [PATCH rdma-next 1/1] IB/IPoIB: Add destination address when re-queue packet
Date: Wed,  1 Feb 2017 19:10:05 +0200	[thread overview]
Message-ID: <20170201171005.15587-1-leon@kernel.org> (raw)

From: Erez Shitrit <erezsh@mellanox.com>

When sending packet to destination that was not resolved yet
via path query, the driver keeps the skb and tries to re-send it
again when the path is resolved.

But when re-sending via dev_queue_xmit the kernel doesn't call
to dev_hard_header, so IPoIB needs to keep 20 bytes in the skb
and to put the destination address inside them.

In that way the dev_start_xmit will have the correct destination,
and the driver won't take the destination from the skb->data, while
nothing exists there, which causes to packet be be dropped.

The test flow is:
1. Run the SM on remote node,
2. Restart the driver.
4. Ping some destination,
3. Observe that first ICMP request will be dropped.

Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 3ce0765a05ab..205fa1c7ec4d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -716,6 +716,14 @@ int ipoib_check_sm_sendonly_fullmember_support(struct ipoib_dev_priv *priv)
 	return ret;
 }
 
+static void push_pseudo_header(struct sk_buff *skb, const char *daddr)
+{
+	struct ipoib_pseudo_header *phdr;
+
+	phdr = (struct ipoib_pseudo_header *)skb_push(skb, sizeof(*phdr));
+	memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
+}
+
 void ipoib_flush_paths(struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -940,8 +948,7 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
 			}
 			if (skb_queue_len(&neigh->queue) <
 			    IPOIB_MAX_PATH_REC_QUEUE) {
-				/* put pseudoheader back on for next time */
-				skb_push(skb, IPOIB_PSEUDO_LEN);
+				push_pseudo_header(skb, neigh->daddr);
 				__skb_queue_tail(&neigh->queue, skb);
 			} else {
 				ipoib_warn(priv, "queue length limit %d. Packet drop.\n",
@@ -959,10 +966,12 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
 
 		if (!path->query && path_rec_start(dev, path))
 			goto err_path;
-		if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE)
+		if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
+			push_pseudo_header(skb, neigh->daddr);
 			__skb_queue_tail(&neigh->queue, skb);
-		else
+		} else {
 			goto err_drop;
+		}
 	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -998,8 +1007,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
 		}
 		if (path) {
 			if (skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
-				/* put pseudoheader back on for next time */
-				skb_push(skb, IPOIB_PSEUDO_LEN);
+				push_pseudo_header(skb, phdr->hwaddr);
 				__skb_queue_tail(&path->queue, skb);
 			} else {
 				++dev->stats.tx_dropped;
@@ -1031,8 +1039,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
 		return;
 	} else if ((path->query || !path_rec_start(dev, path)) &&
 		   skb_queue_len(&path->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
-		/* put pseudoheader back on for next time */
-		skb_push(skb, IPOIB_PSEUDO_LEN);
+		push_pseudo_header(skb, phdr->hwaddr);
 		__skb_queue_tail(&path->queue, skb);
 	} else {
 		++dev->stats.tx_dropped;
@@ -1113,8 +1120,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) {
-		/* put pseudoheader back on for next time */
-		skb_push(skb, sizeof(*phdr));
+		push_pseudo_header(skb, phdr->hwaddr);
 		spin_lock_irqsave(&priv->lock, flags);
 		__skb_queue_tail(&neigh->queue, skb);
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -1146,7 +1152,6 @@ static int ipoib_hard_header(struct sk_buff *skb,
 			     unsigned short type,
 			     const void *daddr, const void *saddr, unsigned len)
 {
-	struct ipoib_pseudo_header *phdr;
 	struct ipoib_header *header;
 
 	header = (struct ipoib_header *) skb_push(skb, sizeof *header);
@@ -1159,8 +1164,7 @@ static int ipoib_hard_header(struct sk_buff *skb,
 	 * destination address into skb hard header so we can figure out where
 	 * to send the packet later.
 	 */
-	phdr = (struct ipoib_pseudo_header *) skb_push(skb, sizeof(*phdr));
-	memcpy(phdr->hwaddr, daddr, INFINIBAND_ALEN);
+	push_pseudo_header(skb, daddr);
 
 	return IPOIB_HARD_LEN;
 }
-- 
2.11.0

             reply	other threads:[~2017-02-01 17:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-01 17:10 Leon Romanovsky [this message]
     [not found] ` <20170201171005.15587-1-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-02-12 11:31   ` [rdma-next, 1/1] IB/IPoIB: Add destination address when re-queue packet Yuval Shaia
2017-02-12 11:31     ` Yuval Shaia
2017-02-15 14:54 ` [PATCH rdma-next " Doug Ledford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170201171005.15587-1-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=dledford@redhat.com \
    --cc=erezsh@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=noaos@mellanox.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.