From: Markus Mayer <code@mmayer.net>
To: Ralf Baechle <ralf@linux-mips.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Markus Mayer <mmayer@broadcom.com>,
MIPS Linux Kernel List <linux-mips@linux-mips.org>,
Power Management List <linux-pm@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] cpufreq: bmips-cpufreq: CPUfreq driver for Broadcom's BMIPS SoCs
Date: Wed, 1 Feb 2017 17:06:00 -0800 [thread overview]
Message-ID: <20170202010601.75995-3-code@mmayer.net> (raw)
In-Reply-To: <20170202010601.75995-1-code@mmayer.net>
From: Markus Mayer <mmayer@broadcom.com>
Add the MIPS CPUfreq driver. This driver currently supports CPUfreq on
BMIPS5xxx-based SoCs.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
drivers/cpufreq/Kconfig | 10 ++
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/bmips-cpufreq.c | 205 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 216 insertions(+)
create mode 100644 drivers/cpufreq/bmips-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index d8b164a..f21fe81 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -271,6 +271,16 @@ config IA64_ACPI_CPUFREQ
endif
if MIPS
+config BMIPS_CPUFREQ
+ tristate "BMIPS CPUfreq Driver"
+ help
+ This option adds a CPUfreq driver for BMIPS processors with
+ support for configurable CPU frequency.
+
+ For now, BMIPS5 chips are supported (such as the Broadcom 7425).
+
+ If in doubt, say N.
+
config LOONGSON2_CPUFREQ
tristate "Loongson2 CPUFreq Driver"
help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1e46c39..b7b3fc7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o
# Other platform drivers
obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o
+obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
diff --git a/drivers/cpufreq/bmips-cpufreq.c b/drivers/cpufreq/bmips-cpufreq.c
new file mode 100644
index 0000000..c69f382
--- /dev/null
+++ b/drivers/cpufreq/bmips-cpufreq.c
@@ -0,0 +1,205 @@
+/*
+ * CPU frequency scaling for Broadcom BMIPS SoCs
+ *
+ * Copyright (c) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+/* for mips_hpt_frequency */
+#include <asm/time.h>
+
+#define BMIPS_CPUFREQ_PREFIX "bmips"
+#define BMIPS_CPUFREQ_NAME BMIPS_CPUFREQ_PREFIX "-cpufreq"
+
+#define TRANSITION_LATENCY (25 * 1000) /* 25 us */
+
+#define BMIPS5_CLK_DIV_SET_SHIFT 0x7
+#define BMIPS5_CLK_DIV_SHIFT 0x4
+#define BMIPS5_CLK_DIV_MASK 0xf
+
+enum bmips_type {
+ BMIPS5000,
+ BMIPS5200,
+};
+
+struct cpufreq_compat {
+ const char *compatible;
+ unsigned int bmips_type;
+ unsigned int clk_mult;
+ unsigned int max_freqs;
+};
+
+#define BMIPS(c, t, m, f) { \
+ .compatible = c, \
+ .bmips_type = (t), \
+ .clk_mult = (m), \
+ .max_freqs = (f), \
+}
+
+static struct cpufreq_compat bmips_cpufreq_compat[] = {
+ BMIPS("brcm,bmips5000", BMIPS5000, 8, 4),
+ BMIPS("brcm,bmips5200", BMIPS5200, 8, 4),
+ { }
+};
+
+static int htp_freq_to_cpu_freq(unsigned int clk_mult)
+{
+ return mips_hpt_frequency * clk_mult / 1000;
+}
+
+static struct cpufreq_frequency_table *
+bmips_cpufreq_get_freq_table(const struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *table;
+ struct cpufreq_compat *cc;
+ unsigned long cpu_freq;
+ int i;
+
+ cc = policy->driver_data;
+ cpu_freq = htp_freq_to_cpu_freq(cc->clk_mult);
+
+ table = kzalloc((cc->max_freqs + 1) * sizeof(*table), GFP_KERNEL);
+ if (!table)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < cc->max_freqs; i++) {
+ table[i].frequency = cpu_freq / (1 << i);
+ table[i].driver_data = i;
+ }
+ table[i].frequency = CPUFREQ_TABLE_END;
+
+ return table;
+}
+
+static unsigned int bmips_cpufreq_get(unsigned int cpu)
+{
+ struct cpufreq_policy *policy;
+ struct cpufreq_compat *cc;
+ unsigned long freq, cpu_freq;
+ unsigned int div;
+ uint32_t mode;
+
+ policy = cpufreq_cpu_get(cpu);
+ cc = policy->driver_data;
+
+ switch (cc->bmips_type) {
+ case BMIPS5200:
+ case BMIPS5000:
+ mode = read_c0_brcm_mode();
+ div = ((mode >> BMIPS5_CLK_DIV_SHIFT) & BMIPS5_CLK_DIV_MASK);
+ break;
+ default:
+ div = 0;
+ }
+
+ cpu_freq = htp_freq_to_cpu_freq(cc->clk_mult);
+ freq = cpu_freq / (1 << div);
+
+ return freq;
+}
+
+static int bmips_cpufreq_target_index(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ struct cpufreq_compat *cc;
+ unsigned int div;
+
+ cc = policy->driver_data;
+ div = policy->freq_table[index].driver_data;
+
+ switch (cc->bmips_type) {
+ case BMIPS5200:
+ case BMIPS5000:
+ change_c0_brcm_mode(BMIPS5_CLK_DIV_MASK << BMIPS5_CLK_DIV_SHIFT,
+ (1 << BMIPS5_CLK_DIV_SET_SHIFT) |
+ (div << BMIPS5_CLK_DIV_SHIFT));
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int bmips_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ kfree(policy->freq_table);
+ policy->freq_table = NULL;
+
+ return 0;
+}
+
+static int bmips_cpufreq_init(struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *freq_table;
+ int ret;
+
+ /* Store the compatibility data with the policy. */
+ policy->driver_data = cpufreq_get_driver_data();
+
+ freq_table = bmips_cpufreq_get_freq_table(policy);
+ if (IS_ERR(freq_table)) {
+ ret = PTR_ERR(freq_table);
+ pr_err("%s: couldn't determine frequency table (%d).\n",
+ BMIPS_CPUFREQ_NAME, ret);
+ return ret;
+ }
+
+ ret = cpufreq_generic_init(policy, freq_table, TRANSITION_LATENCY);
+ if (ret)
+ bmips_cpufreq_exit(policy);
+ else
+ pr_info("%s: registered\n", BMIPS_CPUFREQ_NAME);
+
+ return ret;
+}
+
+static struct cpufreq_driver bmips_cpufreq_driver = {
+ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = bmips_cpufreq_target_index,
+ .get = bmips_cpufreq_get,
+ .init = bmips_cpufreq_init,
+ .exit = bmips_cpufreq_exit,
+ .attr = cpufreq_generic_attr,
+ .name = BMIPS_CPUFREQ_PREFIX,
+};
+
+static int __init bmips_cpufreq_probe(void)
+{
+ struct cpufreq_compat *cc;
+ struct device_node *np;
+
+ for (cc = bmips_cpufreq_compat; cc->compatible; cc++) {
+ np = of_find_compatible_node(NULL, "cpu", cc->compatible);
+ if (np) {
+ of_node_put(np);
+ bmips_cpufreq_driver.driver_data = cc;
+ break;
+ }
+ }
+
+ /* We hit the guard element of the array. No compatible CPU found. */
+ if (!cc->compatible)
+ return -ENODEV;
+
+ return cpufreq_register_driver(&bmips_cpufreq_driver);
+}
+device_initcall(bmips_cpufreq_probe);
+
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("CPUfreq driver for Broadcom BMIPS SoCs");
+MODULE_LICENSE("GPL");
--
2.7.4
next prev parent reply other threads:[~2017-02-02 1:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 1:05 [PATCH 0/3] cpufreq: bmips-cpufreq: CPUfreq driver for Broadcom's BMIPS SoCs Markus Mayer
2017-02-02 1:05 ` [PATCH 1/3] BMIPS: Enable prerequisites for CPUfreq in MIPS Kconfig Markus Mayer
2017-02-02 1:06 ` Markus Mayer [this message]
2017-02-03 4:28 ` [PATCH 2/3] cpufreq: bmips-cpufreq: CPUfreq driver for Broadcom's BMIPS SoCs Viresh Kumar
2017-02-06 21:22 ` Markus Mayer
2017-02-02 1:06 ` [PATCH 3/3] MIPS: BMIPS: enable CPUfreq Markus Mayer
2017-02-03 4:29 ` Viresh Kumar
2017-02-04 1:00 ` Markus Mayer
2017-02-06 3:35 ` Viresh Kumar
2017-02-06 6:38 ` Markus Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170202010601.75995-3-code@mmayer.net \
--to=code@mmayer.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-pm@vger.kernel.org \
--cc=mmayer@broadcom.com \
--cc=ralf@linux-mips.org \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.