Re: failed to build sdimg

[Denys Dmytriyenko <denys@ti.com>]

On Fri, Feb 10, 2017 at 04:46:02PM +0000, Mihaela Apetroaie-Cristea wrote:
> Hello,
> 
> I am trying to build a Beaglebone image using yocto and the meta-ti layer,
> but I am getting the following error:
> 
> 0+0 records out
> 0 bytes (0 B) copied, 8.3469e-05 s, 0.0 kB/s
> + mkfs.ext4 -F
> /media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/data.ext4
> -d
> /media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/data
> mke2fs 1.43 (17-May-2016)
> Discarding device blocks:
> 1024/131072^H^H^H^H^H^H^H^H^H^H^H^H^H
> ^H^H^H^H^H^H^H^H^H^H^H^H^Hdone
> Creating filesystem with 131072 1k blocks and 32768 inodes
> Filesystem UUID: 0b7bc83e-79f0-4136-8426-b56ac37f45bf
> Superblock backups stored on blocks:
>         8193, 24577, 40961, 57345, 73729
> 
> Allocating group tables:  0/16^H^H^H^H^H     ^H^H^H^H^Hdone
> Writing inode tables:  0/16^H^H^H^H^H     ^H^H^H^H^Hdone
> Creating journal (4096 blocks): done
> Copying files into the device: done
> Writing superblocks and filesystem accounting information:
> 0/16^H^H^H^H^H     ^H^H^H^H^Hdone
> 
> +
> wks=/media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/mender-sdimg.wks
> + rm -f
> /media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/mender-sdimg.wks
> + [ -n  ]
> + [ -n 4194304 ]
> + expr 4194304 / 1024
> + boot_env_align_kb=4096
> + cat
> + cat
> +
> outimgname=/media/mika/new/poky/build3/tmp/deploy/images/beaglebone/core-image-minimal-beaglebone-20170210153152.sdimg
> +
> wicout=/media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/deploy-core-image-minimal-image-complete/core-image-minimal-beaglebone-20170210153152-sdimg
> + BUILDDIR=/media/mika/new/poky/build3 wic create
> /media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/mender-sdimg.wks
> --vars /media/mika/new/poky/build3/tmp/sysroots/beaglebone/imgdata/ $
> Warning: bootloader config not specified, using defaults
> Error: Malformed boot file entry: u-boot.bin;
> Checking basic build environment...
> Done.
> 
> Creating image(s)...
> 
> + bb_exit_handler
> + ret=1
> + echo WARNING: exit code 1 from a shell command.
> WARNING: exit code 1 from a shell command.
> + exit 1
> ERROR: Function failed: do_image_sdimg (log file is located at
> /media/mika/new/poky/build3/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_sdimg.32746)
> 
> 
> I am building the image on a Debian Jessie VM, metat-ti and poky are both
> morty up to date.

Mihaela,

The above code is not coming from meta-ti - e.g. mender and wic for sdimg 
image creation.

-- 
Denys