All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Joe Perches <joe@perches.com>, Jason Baron <jbaron@akamai.com>
Subject: [for-next][PATCH 6/8] jump_label: Reduce the size of struct static_key
Date: Wed, 15 Feb 2017 09:04:56 -0500	[thread overview]
Message-ID: <20170215140504.820879747@goodmis.org> (raw)
In-Reply-To: 20170215140450.739053917@goodmis.org

[-- Attachment #1: 0006-jump_label-Reduce-the-size-of-struct-static_key.patch --]
[-- Type: text/plain, Size: 11691 bytes --]

From: Jason Baron <jbaron@akamai.com>

The static_key->next field goes mostly unused. The field is used for
associating module uses with a static key. Most uses of struct static_key
define a static key in the core kernel and make use of it entirely within
the core kernel, or define the static key in a module and make use of it
only from within that module. In fact, of the ~3,000 static keys defined,
I found only about 5 or so that did not fit this pattern.

Thus, we can remove the static_key->next field entirely and overload
the static_key->entries field. That is, when all the static_key uses
are contained within the same module, static_key->entries continues
to point to those uses. However, if the static_key uses are not contained
within the module where the static_key is defined, then we allocate a
struct static_key_mod, store a pointer to the uses within that
struct static_key_mod, and have the static key point at the static_key_mod.
This does incur some extra memory usage when a static_key is used in a
module that does not define it, but since there are only a handful of such
cases there is a net savings.

In order to identify if the static_key->entries pointer contains a
struct static_key_mod or a struct jump_entry pointer, bit 1 of
static_key->entries is set to 1 if it points to a struct static_key_mod and
is 0 if it points to a struct jump_entry. We were already using bit 0 in a
similar way to store the initial value of the static_key. This does mean
that allocations of struct static_key_mod and that the struct jump_entry
tables need to be at least 4-byte aligned in memory. As far as I can tell
all arches meet this criteria.

For my .config, the patch increased the text by 778 bytes, but reduced
the data + bss size by 14912, for a net savings of 14,134 bytes.

   text	   data	    bss	    dec	    hex	filename
8092427	5016512	 790528	13899467	 d416cb	vmlinux.pre
8093205	5001600	 790528	13885333	 d3df95	vmlinux.post

Link: http://lkml.kernel.org/r/1486154544-4321-1-git-send-email-jbaron@akamai.com

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
---
 Documentation/static-keys.txt |   4 +-
 include/linux/jump_label.h    |  23 ++++---
 kernel/jump_label.c           | 153 +++++++++++++++++++++++++++++++++++-------
 3 files changed, 145 insertions(+), 35 deletions(-)

diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index ea8d7b4e53f0..32a25fad0c1b 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -155,7 +155,9 @@ or:
 
 There are a few functions and macros that architectures must implement in order
 to take advantage of this optimization. If there is no architecture support, we
-simply fall back to a traditional, load, test, and jump sequence.
+simply fall back to a traditional, load, test, and jump sequence. Also, the
+struct jump_entry table must be at least 4-byte aligned because the
+static_key->entry field makes use of the two least significant bits.
 
 * select HAVE_ARCH_JUMP_LABEL, see: arch/x86/Kconfig
 
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
index a0547c571800..680c98b2f41c 100644
--- a/include/linux/jump_label.h
+++ b/include/linux/jump_label.h
@@ -89,11 +89,17 @@ extern bool static_key_initialized;
 
 struct static_key {
 	atomic_t enabled;
-/* Set lsb bit to 1 if branch is default true, 0 ot */
-	struct jump_entry *entries;
-#ifdef CONFIG_MODULES
-	struct static_key_mod *next;
-#endif
+/*
+ * bit 0 => 1 if key is initially true
+ *	    0 if initially false
+ * bit 1 => 1 if points to struct static_key_mod
+ *	    0 if points to struct jump_entry
+ */
+	union {
+		unsigned long type;
+		struct jump_entry *entries;
+		struct static_key_mod *next;
+	};
 };
 
 #else
@@ -118,9 +124,10 @@ struct module;
 
 #ifdef HAVE_JUMP_LABEL
 
-#define JUMP_TYPE_FALSE	0UL
-#define JUMP_TYPE_TRUE	1UL
-#define JUMP_TYPE_MASK	1UL
+#define JUMP_TYPE_FALSE		0UL
+#define JUMP_TYPE_TRUE		1UL
+#define JUMP_TYPE_LINKED	2UL
+#define JUMP_TYPE_MASK		3UL
 
 static __always_inline bool static_key_false(struct static_key *key)
 {
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index 93ad6c1fb9b6..953411f5ba7f 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -229,12 +229,28 @@ void __weak __init_or_module arch_jump_label_transform_static(struct jump_entry
 
 static inline struct jump_entry *static_key_entries(struct static_key *key)
 {
-	return (struct jump_entry *)((unsigned long)key->entries & ~JUMP_TYPE_MASK);
+	WARN_ON_ONCE(key->type & JUMP_TYPE_LINKED);
+	return (struct jump_entry *)(key->type & ~JUMP_TYPE_MASK);
 }
 
 static inline bool static_key_type(struct static_key *key)
 {
-	return (unsigned long)key->entries & JUMP_TYPE_MASK;
+	return key->type & JUMP_TYPE_TRUE;
+}
+
+static inline bool static_key_linked(struct static_key *key)
+{
+	return key->type & JUMP_TYPE_LINKED;
+}
+
+static inline void static_key_clear_linked(struct static_key *key)
+{
+	key->type &= ~JUMP_TYPE_LINKED;
+}
+
+static inline void static_key_set_linked(struct static_key *key)
+{
+	key->type |= JUMP_TYPE_LINKED;
 }
 
 static inline struct static_key *jump_entry_key(struct jump_entry *entry)
@@ -247,6 +263,26 @@ static bool jump_entry_branch(struct jump_entry *entry)
 	return (unsigned long)entry->key & 1UL;
 }
 
+/***
+ * A 'struct static_key' uses a union such that it either points directly
+ * to a table of 'struct jump_entry' or to a linked list of modules which in
+ * turn point to 'struct jump_entry' tables.
+ *
+ * The two lower bits of the pointer are used to keep track of which pointer
+ * type is in use and to store the initial branch direction, we use an access
+ * function which preserves these bits.
+ */
+static void static_key_set_entries(struct static_key *key,
+				   struct jump_entry *entries)
+{
+	unsigned long type;
+
+	WARN_ON_ONCE((unsigned long)entries & JUMP_TYPE_MASK);
+	type = key->type & JUMP_TYPE_MASK;
+	key->entries = entries;
+	key->type |= type;
+}
+
 static enum jump_label_type jump_label_type(struct jump_entry *entry)
 {
 	struct static_key *key = jump_entry_key(entry);
@@ -306,13 +342,7 @@ void __init jump_label_init(void)
 			continue;
 
 		key = iterk;
-		/*
-		 * Set key->entries to iter, but preserve JUMP_LABEL_TRUE_BRANCH.
-		 */
-		*((unsigned long *)&key->entries) += (unsigned long)iter;
-#ifdef CONFIG_MODULES
-		key->next = NULL;
-#endif
+		static_key_set_entries(key, iter);
 	}
 	static_key_initialized = true;
 	jump_label_unlock();
@@ -336,6 +366,29 @@ struct static_key_mod {
 	struct module *mod;
 };
 
+static inline struct static_key_mod *static_key_mod(struct static_key *key)
+{
+	WARN_ON_ONCE(!(key->type & JUMP_TYPE_LINKED));
+	return (struct static_key_mod *)(key->type & ~JUMP_TYPE_MASK);
+}
+
+/***
+ * key->type and key->next are the same via union.
+ * This sets key->next and preserves the type bits.
+ *
+ * See additional comments above static_key_set_entries().
+ */
+static void static_key_set_mod(struct static_key *key,
+			       struct static_key_mod *mod)
+{
+	unsigned long type;
+
+	WARN_ON_ONCE((unsigned long)mod & JUMP_TYPE_MASK);
+	type = key->type & JUMP_TYPE_MASK;
+	key->next = mod;
+	key->type |= type;
+}
+
 static int __jump_label_mod_text_reserved(void *start, void *end)
 {
 	struct module *mod;
@@ -358,11 +411,23 @@ static void __jump_label_mod_update(struct static_key *key)
 {
 	struct static_key_mod *mod;
 
-	for (mod = key->next; mod; mod = mod->next) {
-		struct module *m = mod->mod;
+	for (mod = static_key_mod(key); mod; mod = mod->next) {
+		struct jump_entry *stop;
+		struct module *m;
+
+		/*
+		 * NULL if the static_key is defined in a module
+		 * that does not use it
+		 */
+		if (!mod->entries)
+			continue;
 
-		__jump_label_update(key, mod->entries,
-				    m->jump_entries + m->num_jump_entries);
+		m = mod->mod;
+		if (!m)
+			stop = __stop___jump_table;
+		else
+			stop = m->jump_entries + m->num_jump_entries;
+		__jump_label_update(key, mod->entries, stop);
 	}
 }
 
@@ -397,7 +462,7 @@ static int jump_label_add_module(struct module *mod)
 	struct jump_entry *iter_stop = iter_start + mod->num_jump_entries;
 	struct jump_entry *iter;
 	struct static_key *key = NULL;
-	struct static_key_mod *jlm;
+	struct static_key_mod *jlm, *jlm2;
 
 	/* if the module doesn't have jump label entries, just return */
 	if (iter_start == iter_stop)
@@ -414,20 +479,32 @@ static int jump_label_add_module(struct module *mod)
 
 		key = iterk;
 		if (within_module(iter->key, mod)) {
-			/*
-			 * Set key->entries to iter, but preserve JUMP_LABEL_TRUE_BRANCH.
-			 */
-			*((unsigned long *)&key->entries) += (unsigned long)iter;
-			key->next = NULL;
+			static_key_set_entries(key, iter);
 			continue;
 		}
 		jlm = kzalloc(sizeof(struct static_key_mod), GFP_KERNEL);
 		if (!jlm)
 			return -ENOMEM;
+		if (!static_key_linked(key)) {
+			jlm2 = kzalloc(sizeof(struct static_key_mod),
+				       GFP_KERNEL);
+			if (!jlm2) {
+				kfree(jlm);
+				return -ENOMEM;
+			}
+			preempt_disable();
+			jlm2->mod = __module_address((unsigned long)key);
+			preempt_enable();
+			jlm2->entries = static_key_entries(key);
+			jlm2->next = NULL;
+			static_key_set_mod(key, jlm2);
+			static_key_set_linked(key);
+		}
 		jlm->mod = mod;
 		jlm->entries = iter;
-		jlm->next = key->next;
-		key->next = jlm;
+		jlm->next = static_key_mod(key);
+		static_key_set_mod(key, jlm);
+		static_key_set_linked(key);
 
 		/* Only update if we've changed from our initial state */
 		if (jump_label_type(iter) != jump_label_init_type(iter))
@@ -454,16 +531,34 @@ static void jump_label_del_module(struct module *mod)
 		if (within_module(iter->key, mod))
 			continue;
 
+		/* No memory during module load */
+		if (WARN_ON(!static_key_linked(key)))
+			continue;
+
 		prev = &key->next;
-		jlm = key->next;
+		jlm = static_key_mod(key);
 
 		while (jlm && jlm->mod != mod) {
 			prev = &jlm->next;
 			jlm = jlm->next;
 		}
 
-		if (jlm) {
+		/* No memory during module load */
+		if (WARN_ON(!jlm))
+			continue;
+
+		if (prev == &key->next)
+			static_key_set_mod(key, jlm->next);
+		else
 			*prev = jlm->next;
+
+		kfree(jlm);
+
+		jlm = static_key_mod(key);
+		/* if only one etry is left, fold it back into the static_key */
+		if (jlm->next == NULL) {
+			static_key_set_entries(key, jlm->entries);
+			static_key_clear_linked(key);
 			kfree(jlm);
 		}
 	}
@@ -492,8 +587,10 @@ jump_label_module_notify(struct notifier_block *self, unsigned long val,
 	case MODULE_STATE_COMING:
 		jump_label_lock();
 		ret = jump_label_add_module(mod);
-		if (ret)
+		if (ret) {
+			WARN(1, "Failed to allocatote memory: jump_label may not work properly.\n");
 			jump_label_del_module(mod);
+		}
 		jump_label_unlock();
 		break;
 	case MODULE_STATE_GOING:
@@ -554,11 +651,14 @@ int jump_label_text_reserved(void *start, void *end)
 static void jump_label_update(struct static_key *key)
 {
 	struct jump_entry *stop = __stop___jump_table;
-	struct jump_entry *entry = static_key_entries(key);
+	struct jump_entry *entry;
 #ifdef CONFIG_MODULES
 	struct module *mod;
 
-	__jump_label_mod_update(key);
+	if (static_key_linked(key)) {
+		__jump_label_mod_update(key);
+		return;
+	}
 
 	preempt_disable();
 	mod = __module_address((unsigned long)key);
@@ -566,6 +666,7 @@ static void jump_label_update(struct static_key *key)
 		stop = mod->jump_entries + mod->num_jump_entries;
 	preempt_enable();
 #endif
+	entry = static_key_entries(key);
 	/* if there are no users, entry can be NULL */
 	if (entry)
 		__jump_label_update(key, entry, stop);
-- 
2.10.2

  parent reply	other threads:[~2017-02-15 14:07 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-15 14:04 [for-next][PATCH 0/8] tracing: More updates for 4.11 Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 1/8] tracing: Have COMM event filter key be treated as a string Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 2/8] tracing: Have traceprobe_probes_write() not access userspace unnecessarily Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 3/8] timers: Make flags output in the timer_start tracepoint useful Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 4/8] tracing/hwlat: Update old comment about migration Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 5/8] tracing/probe: Show subsystem name in messages Steven Rostedt
2017-02-15 14:04 ` Steven Rostedt [this message]
2017-02-15 14:04 ` [for-next][PATCH 7/8] tracing: Use modern function declaration Steven Rostedt
2017-02-15 14:04 ` [for-next][PATCH 8/8] tracing: Fix return value check in trace_benchmark_reg() Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170215140504.820879747@goodmis.org \
    --to=rostedt@goodmis.org \
    --cc=akpm@linux-foundation.org \
    --cc=jbaron@akamai.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.