From: Ingo Molnar <mingo@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
"Thomas Gleixner" <tglx@linutronix.de>,
"Peter Zijlstra" <a.p.zijlstra@chello.nl>,
"Frédéric Weisbecker" <fweisbec@gmail.com>,
"H. Peter Anvin" <hpa@zytor.com>,
"Andrew Morton" <akpm@linux-foundation.org>
Subject: [GIT PULL] x86/apic changes for v4.11
Date: Mon, 20 Feb 2017 12:17:40 +0100 [thread overview]
Message-ID: <20170220111740.GA7805@gmail.com> (raw)
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-apic-for-linus
# HEAD: 543113d2f4b5dd40d46a95502effe86b845dfe34 x86/apic: Fix a typo in a comment line
The main changes in this cycle were:
- Re-activate the hw IRQ resend mechanism that was downgraded to a sw-resend
unintentionally. (Ruslan Ruslichenko)
- Avoid sporadic spurious hrtimer interrupts (Frederic Weisbecker)
Thanks,
Ingo
------------------>
Dou Liyang (2):
x86/apic: Fix typos in comments
x86/apic: Fix a typo in a comment line
Frederic Weisbecker (1):
x86/apic: Implement set_state_oneshot_stopped() callback
Ruslan Ruslichenko (1):
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
arch/x86/kernel/apic/apic.c | 33 +++++++++++++++++----------------
arch/x86/kernel/apic/io_apic.c | 2 ++
2 files changed, 19 insertions(+), 16 deletions(-)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 5b7e43eff139..8567c851172c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -529,18 +529,19 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
* The local apic timer can be used for any function which is CPU local.
*/
static struct clock_event_device lapic_clockevent = {
- .name = "lapic",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP
- | CLOCK_EVT_FEAT_DUMMY,
- .shift = 32,
- .set_state_shutdown = lapic_timer_shutdown,
- .set_state_periodic = lapic_timer_set_periodic,
- .set_state_oneshot = lapic_timer_set_oneshot,
- .set_next_event = lapic_next_event,
- .broadcast = lapic_timer_broadcast,
- .rating = 100,
- .irq = -1,
+ .name = "lapic",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP
+ | CLOCK_EVT_FEAT_DUMMY,
+ .shift = 32,
+ .set_state_shutdown = lapic_timer_shutdown,
+ .set_state_periodic = lapic_timer_set_periodic,
+ .set_state_oneshot = lapic_timer_set_oneshot,
+ .set_state_oneshot_stopped = lapic_timer_shutdown,
+ .set_next_event = lapic_next_event,
+ .broadcast = lapic_timer_broadcast,
+ .rating = 100,
+ .irq = -1,
};
static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
@@ -1245,7 +1246,7 @@ static void lapic_setup_esr(void)
/**
* setup_local_APIC - setup the local APIC
*
- * Used to setup local APIC while initializing BSP or bringin up APs.
+ * Used to setup local APIC while initializing BSP or bringing up APs.
* Always called with preemption disabled.
*/
void setup_local_APIC(void)
@@ -2028,8 +2029,8 @@ void disconnect_bsp_APIC(int virt_wire_setup)
/*
* The number of allocated logical CPU IDs. Since logical CPU IDs are allocated
* contiguously, it equals to current allocated max logical CPU ID plus 1.
- * All allocated CPU ID should be in [0, nr_logical_cpuidi), so the maximum of
- * nr_logical_cpuids is nr_cpu_ids.
+ * All allocated CPU IDs should be in the [0, nr_logical_cpuids) range,
+ * so the maximum of nr_logical_cpuids is nr_cpu_ids.
*
* NOTE: Reserve 0 for BSP.
*/
@@ -2094,7 +2095,7 @@ int __generic_processor_info(int apicid, int version, bool enabled)
* Since fixing handling of boot_cpu_physical_apicid requires
* another discussion and tests on each platform, we leave it
* for now and here we use read_apic_id() directly in this
- * function, generic_processor_info().
+ * function, __generic_processor_info().
*/
if (disabled_cpu_apicid != BAD_APICID &&
disabled_cpu_apicid != read_apic_id() &&
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 945e512a112a..1e35dd06b090 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1875,6 +1875,7 @@ static struct irq_chip ioapic_chip __read_mostly = {
.irq_ack = irq_chip_ack_parent,
.irq_eoi = ioapic_ack_level,
.irq_set_affinity = ioapic_set_affinity,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
@@ -1886,6 +1887,7 @@ static struct irq_chip ioapic_ir_chip __read_mostly = {
.irq_ack = irq_chip_ack_parent,
.irq_eoi = ioapic_ir_ack_level,
.irq_set_affinity = ioapic_set_affinity,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
reply other threads:[~2017-02-20 11:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170220111740.GA7805@gmail.com \
--to=mingo@kernel.org \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.