Re: Python 3 bindings

["Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>]

[-- Attachment #1.1: Type: text/plain, Size: 4675 bytes --]

On Wed, Feb 22, 2017 at 11:34:16AM +0000, Wei Liu wrote:
> On Tue, Feb 21, 2017 at 02:03:00PM +0100, Marek Marczykowski-Górecki wrote:
> > On Mon, Feb 20, 2017 at 05:18:44PM +0000, Wei Liu wrote:
> > > On Fri, Feb 17, 2017 at 01:36:01PM +0100, Marek Marczykowski-Górecki wrote:
> > > > Hi,
> > > > 
> > > > I'm adjusting python bindings to work on python3 too. This will require
> > > > few #if in the code (to compile for both python2 and python3), but it
> > > > isn't that bad. But there are some major changes in python3, which
> > > > require some decision about the bindings API:
> > > > 
> > > > 1. Python3 has no longer separate 'int' and 'long' type - old 'long'
> > > > type was renamed to 'int' (but on C-API level, it uses PyLong_*). I see
> > > > two options:
> > > >   - switch to PyLong_* everywhere, including python2 bindings - this
> > > >     makes the code much cleaner, but it is an API change in python2
> > > >   - switch to PyLong_* only for python3 - this will introduce some
> > > >     #ifdefs, but python2 API will be unchanged
> > > 
> > > Could you be more specific? Like, provide a code snippet?
> > 
> > Here is compile tested only version:
> > https://github.com/marmarek/xen/tree/python3
> > 
> > It uses PyLong_* only for python3, here is how it looks in code (I've
> > skipped s/PyInt_/PyLongOrInt_/ for readability):
> > 
> > -----8<-----
> > --- a/tools/python/xen/lowlevel/xc/xc.c
> > +++ b/tools/python/xen/lowlevel/xc/xc.c
> > @@ -34,6 +34,17 @@
> >  
> >  #define FLASK_CTX_LEN 1024
> >  
> > +/* Python 2 compatibility */
> > +#if PY_VERSION_HEX >= 0x03000000
> > +#define PyLongOrInt_FromLong PyLong_FromLong
> > +#define PyLongOrInt_Check PyLong_Check
> > +#define PyLongOrInt_AsLong PyLong_AsLong
> > +#else
> > +#define PyLongOrInt_FromLong PyInt_FromLong
> > +#define PyLongOrInt_Check PyInt_Check
> > +#define PyLongOrInt_AsLong PyInt_AsLong
> > +#endif
> > +
> >  static PyObject *xc_error_obj, *zero;
> >  
> >  typedef struct {
> > --- a/tools/python/xen/lowlevel/xs/xs.c
> > +++ b/tools/python/xen/lowlevel/xs/xs.c
> > @@ -43,6 +43,14 @@
> >  #define PKG "xen.lowlevel.xs"
> >  #define CLS "xs"
> >  
> > +#if PY_VERSION_HEX < 0x03000000
> > +/* Python 2 compatibility */
> > +#define PyLong_FromLong PyInt_FromLong
> > +#undef PyLong_Check
> > +#define PyLong_Check PyInt_Check
> > +#define PyLong_AsLong PyInt_AsLong
> > +#endif
> > +
> >  static PyObject *xs_error;
> >  
> 
> If this is the recommended practice, then that's fine. I can't seem to
> find such practice in https://docs.python.org/3/howto/cporting.html but
> I'm no python binding expert.

"In the C-API, PyInt_* functions are replaced by their PyLong_*
equivalents."

> BTW, I went through your python3 branch. It seems that some patches can
> be submitted independently.

Yes, I've tried to separate cleanup commits from actual python3 support.

> >  /** Python wrapper round an xs handle.
> > -----8<-----
> > 
> > > 
> > > > 
> > > > 2. Python3 has no longer separate 'str' and 'unicode' type, new 'str' is
> > > > the same as 'unicode' (PyUnicode_* at C-API level). For things not
> > > > really unicode-aware, 'bytes' type should be used. On the other hand, in
> > > > python2 'bytes' type was the same as 'str'.
> > > > This affects various places, where in most cases 'bytes' type is
> > > > appropriate (for example cpuid). But I'm not sure about xenstore paths -
> > > > those should also be 'bytes', or maybe 'unicode' (which is implicitly
> > > > using 'utf-8' encoding)? I think the only reason to use 'unicode' is
> > > 
> > > According to docs/txt/misc/xenstore.txt, paths should be ASCII
> > > alphanumerics plus four punctuation characters. Not sure if this is
> > > relevant to what you describe.
> > 
> > It's easy to make function accept both 'bytes' and 'unicode'. The
> > question is what should be return type (read_watch, ls etc) - given
> > limited character set used there, I'm in favor of 'unicode' - easier to
> > handle, but we shouldn't hit any unicode decoding problems.
> > Maybe the same should apply to path arguments (use 'unicode')? Most
> > file-handling methods in python3 use 'unicode' for paths, if that
> > matters.
> > 
> 
> OK. Using unicode makes sense to me. Again, I'm no python expert and I
> trust what you said. :-)

Ok, I'll adjust patches to return unicode paths.

Then test them and actually send here :)

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[-- Attachment #2: Type: text/plain, Size: 127 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel