From: Trevor Woerner <twoerner@gmail.com>
To: openembedded-core@lists.openembedded.org
Subject: Re: npm thoughts
Date: Tue, 28 Feb 2017 13:19:24 -0500 [thread overview]
Message-ID: <20170228181924.GC16277@linux-uys3> (raw)
In-Reply-To: <20170228045004.GA5913@linux-uys3>
In face-to-face conversations there was an expressed opinion that it would be
great if npm had a "--dry-run" -type option to list off the dependencies of a
package.json file.
As it turns out, it does!
$ npm install --dry-run
electron-quick-start@1.0.0 /z/npm/source/electron-quick-start.git
└─┬ electron@1.4.15
├─┬ electron-download@3.3.0
│ ├─┬ debug@2.6.1
│ │ └── ms@0.7.2
│ ├─┬ fs-extra@0.30.0
│ │ ├── graceful-fs@4.1.11
│ │ ├── jsonfile@2.4.0
│ │ ├── klaw@1.3.1
│ │ ├── path-is-absolute@1.0.1
│ │ └─┬ rimraf@2.6.1
│ │ └─┬ glob@7.1.1
│ │ ├── fs.realpath@1.0.0
│ │ ├─┬ inflight@1.0.6
│ │ │ └── wrappy@1.0.2
│ │ ├─┬ minimatch@3.0.3
│ │ │ └─┬ brace-expansion@1.1.6
│ │ │ ├── balanced-match@0.4.2
│ │ │ └── concat-map@0.0.1
│ │ └── once@1.4.0
│ ├── home-path@1.0.3
│ ├── minimist@1.2.0
│ ├─┬ nugget@2.0.1
│ │ ├─┬ pretty-bytes@1.0.4
│ │ │ ├── get-stdin@4.0.1
│ │ │ └─┬ meow@3.7.0
│ │ │ ├─┬ camelcase-keys@2.1.0
│ │ │ │ └── camelcase@2.1.1
│ │ │ ├── decamelize@1.2.0
│ │ │ ├─┬ loud-rejection@1.6.0
│ │ │ │ ├─┬ currently-unhandled@0.4.1
│ │ │ │ │ └── array-find-index@1.0.2
│ │ │ │ └── signal-exit@3.0.2
│ │ │ ├── map-obj@1.0.1
│ │ │ ├─┬ normalize-package-data@2.3.5
│ │ │ │ ├── hosted-git-info@2.2.0
│ │ │ │ ├─┬ is-builtin-module@1.0.0
│ │ │ │ │ └── builtin-modules@1.1.1
│ │ │ │ └─┬ validate-npm-package-license@3.0.1
│ │ │ │ ├─┬ spdx-correct@1.0.2
│ │ │ │ │ └── spdx-license-ids@1.2.2
│ │ │ │ └── spdx-expression-parse@1.0.4
│ │ │ ├── object-assign@4.1.1
│ │ │ ├─┬ read-pkg-up@1.0.1
│ │ │ │ ├── find-up@1.1.2
│ │ │ │ └─┬ read-pkg@1.1.0
│ │ │ │ ├─┬ load-json-file@1.1.0
│ │ │ │ │ ├─┬ parse-json@2.2.0
│ │ │ │ │ │ └─┬ error-ex@1.3.0
│ │ │ │ │ │ └── is-arrayish@0.2.1
│ │ │ │ │ ├── pify@2.3.0
│ │ │ │ │ └─┬ strip-bom@2.0.0
│ │ │ │ │ └── is-utf8@0.2.1
│ │ │ │ └── path-type@1.1.0
│ │ │ ├─┬ redent@1.0.0
│ │ │ │ ├─┬ indent-string@2.1.0
│ │ │ │ │ └─┬ repeating@2.0.1
│ │ │ │ │ └── is-finite@1.0.2
│ │ │ │ └── strip-indent@1.0.1
│ │ │ └── trim-newlines@1.0.0
│ │ ├─┬ progress-stream@1.2.0
│ │ │ ├── speedometer@0.1.4
│ │ │ └─┬ through2@0.2.3
│ │ │ ├─┬ readable-stream@1.1.14
│ │ │ │ └── isarray@0.0.1
│ │ │ └─┬ xtend@2.1.2
│ │ │ └── object-keys@0.4.0
│ │ ├─┬ request@2.79.0
│ │ │ ├── aws-sign2@0.6.0
│ │ │ ├── aws4@1.6.0
│ │ │ ├── caseless@0.11.0
│ │ │ ├─┬ combined-stream@1.0.5
│ │ │ │ └── delayed-stream@1.0.0
│ │ │ ├── extend@3.0.0
│ │ │ ├── forever-agent@0.6.1
│ │ │ ├─┬ form-data@2.1.2
│ │ │ │ └── asynckit@0.4.0
│ │ │ ├─┬ har-validator@2.0.6
│ │ │ │ ├─┬ chalk@1.1.3
│ │ │ │ │ ├── ansi-styles@2.2.1
│ │ │ │ │ ├── escape-string-regexp@1.0.5
│ │ │ │ │ ├── has-ansi@2.0.0
│ │ │ │ │ └── supports-color@2.0.0
│ │ │ │ ├─┬ commander@2.9.0
│ │ │ │ │ └── graceful-readlink@1.0.1
│ │ │ │ └─┬ is-my-json-valid@2.16.0
│ │ │ │ ├── generate-function@2.0.0
│ │ │ │ ├─┬ generate-object-property@1.2.0
│ │ │ │ │ └── is-property@1.0.2
│ │ │ │ ├── jsonpointer@4.0.1
│ │ │ │ └── xtend@4.0.1
│ │ │ ├─┬ hawk@3.1.3
│ │ │ │ ├── boom@2.10.1
│ │ │ │ ├── cryptiles@2.0.5
│ │ │ │ ├── hoek@2.16.3
│ │ │ │ └── sntp@1.0.9
│ │ │ ├─┬ http-signature@1.1.1
│ │ │ │ ├── assert-plus@0.2.0
│ │ │ │ ├─┬ jsprim@1.3.1
│ │ │ │ │ ├── extsprintf@1.0.2
│ │ │ │ │ ├── json-schema@0.2.3
│ │ │ │ │ └── verror@1.3.6
│ │ │ │ └─┬ sshpk@1.10.2
│ │ │ │ ├── asn1@0.2.3
│ │ │ │ ├── assert-plus@1.0.0
│ │ │ │ ├── bcrypt-pbkdf@1.0.1
│ │ │ │ ├─┬ dashdash@1.14.1
│ │ │ │ │ └── assert-plus@1.0.0
│ │ │ │ ├── ecc-jsbn@0.1.1
│ │ │ │ ├─┬ getpass@0.1.6
│ │ │ │ │ └── assert-plus@1.0.0
│ │ │ │ ├── jodid25519@1.0.2
│ │ │ │ ├── jsbn@0.1.1
│ │ │ │ └── tweetnacl@0.14.5
│ │ │ ├── is-typedarray@1.0.0
│ │ │ ├── isstream@0.1.2
│ │ │ ├── json-stringify-safe@5.0.1
│ │ │ ├─┬ mime-types@2.1.14
│ │ │ │ └── mime-db@1.26.0
│ │ │ ├── oauth-sign@0.8.2
│ │ │ ├── qs@6.3.1
│ │ │ ├── stringstream@0.0.5
│ │ │ ├─┬ tough-cookie@2.3.2
│ │ │ │ └── punycode@1.4.1
│ │ │ ├── tunnel-agent@0.4.3
│ │ │ └── uuid@3.0.1
│ │ ├─┬ single-line-log@1.1.2
│ │ │ └─┬ string-width@1.0.2
│ │ │ ├── code-point-at@1.1.0
│ │ │ ├─┬ is-fullwidth-code-point@1.0.0
│ │ │ │ └── number-is-nan@1.0.1
│ │ │ └─┬ strip-ansi@3.0.1
│ │ │ └── ansi-regex@2.1.1
│ │ └── throttleit@0.0.2
│ ├─┬ path-exists@2.1.0
│ │ └─┬ pinkie-promise@2.0.1
│ │ └── pinkie@2.0.4
│ ├─┬ rc@1.1.7
│ │ ├── deep-extend@0.4.1
│ │ ├── ini@1.3.4
│ │ └── strip-json-comments@2.0.1
│ ├── semver@5.3.0
│ └─┬ sumchecker@1.3.0
│ └── es6-promise@4.0.5
└─┬ extract-zip@1.6.0
├─┬ concat-stream@1.5.0
│ ├── inherits@2.0.3
│ ├─┬ readable-stream@2.0.6
│ │ ├── core-util-is@1.0.2
│ │ ├── isarray@1.0.0
│ │ ├── process-nextick-args@1.0.7
│ │ ├── string_decoder@0.10.31
│ │ └── util-deprecate@1.0.2
│ └── typedarray@0.0.6
├── debug@0.7.4
├─┬ mkdirp@0.5.0
│ └── minimist@0.0.8
└─┬ yauzl@2.4.1
└─┬ fd-slicer@1.0.1
└── pend@1.2.0
next prev parent reply other threads:[~2017-02-28 18:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 4:50 npm thoughts Trevor Woerner
2017-02-28 16:56 ` Trevor Woerner
2017-02-28 18:00 ` Trevor Woerner
2017-03-03 10:26 ` Josef Holzmayr
2017-03-06 7:24 ` Anders Darander
2017-02-28 18:19 ` Trevor Woerner [this message]
2017-03-03 10:45 ` Josef Holzmayr
2017-03-03 10:57 ` Alexander Kanavin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170228181924.GC16277@linux-uys3 \
--to=twoerner@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.