From: Rob Clark <robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org,
Robin Murphy <robin.murphy@arm.com>,
Will Deacon <will.deacon@arm.com>,
Sricharan <sricharan@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Stanimir Varbanov <stanimir.varbanov@linaro.org>,
Rob Clark <robdclark@gmail.com>
Subject: [PATCH 9/9] ARM64: DT: add iommu for msm8916
Date: Wed, 1 Mar 2017 12:42:58 -0500 [thread overview]
Message-ID: <20170301174258.14618-10-robdclark@gmail.com> (raw)
In-Reply-To: <20170301174258.14618-1-robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 57 +++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7bcf4cd..10ca05a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -705,6 +705,59 @@
#thermal-sensor-cells = <1>;
};
+ apps_iommu: msm-iommu-v1@1e20000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm-iommu-v1";
+ ranges = <0 0x1e20000 0x40000>;
+ reg = <0x1ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface_clk", "bus_clk";
+ qcom,iommu-secure-id = <17>;
+
+ // mdp_0:
+ msm-iommu-v1-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 0>;
+ };
+
+ // venus_ns:
+ msm-iommu-v1-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 0>;
+ };
+ };
+
+ gpu_iommu: msm-iommu-v1@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm-iommu-v1";
+ ranges = <0 0x1f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface_clk", "bus_clk";
+ qcom,iommu-secure-id = <18>;
+
+ // gfx3d_user:
+ msm-iommu-v1-ctx@1f09000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 0>;
+ };
+
+ // gfx3d_priv:
+ msm-iommu-v1-ctx@1f0a000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 0>;
+ };
+ };
+
gpu@01c00000 {
compatible = "qcom,adreno-306.0", "qcom,adreno";
reg = <0x01c00000 0x20000>;
@@ -726,6 +779,7 @@
<&gcc GCC_BIMC_GPU_CLK>,
<&gcc GFX3D_CLK_SRC>;
power-domains = <&gcc OXILI_GDSC>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
};
mdss: mdss@1a00000 {
@@ -769,6 +823,8 @@
"core_clk",
"vsync_clk";
+ iommus = <&apps_iommu 4>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1207,6 +1263,7 @@
<&gcc GCC_VENUS0_AHB_CLK>,
<&gcc GCC_VENUS0_AXI_CLK>;
clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
memory-region = <&venus_mem>;
status = "okay";
--
2.9.3
next prev parent reply other threads:[~2017-03-01 17:43 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-01 17:42 [PATCH 0/9] iommu: add qcom_iommu for early "B" family devices Rob Clark
[not found] ` <20170301174258.14618-1-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-01 17:42 ` [PATCH 1/9] firmware/qcom: add qcom_scm_restore_sec_cfg() Rob Clark
2017-03-01 17:42 ` [PATCH 2/9] firmware: qcom_scm: add two scm calls for iommu secure page table Rob Clark
2017-03-01 17:42 ` [PATCH 3/9] Docs: dt: document qcom iommu bindings Rob Clark
[not found] ` <20170301174258.14618-4-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-03 6:21 ` Rob Herring
2017-03-03 16:04 ` Rob Clark
2017-03-01 17:42 ` [PATCH 4/9] iommu: arm-smmu: split out register defines Rob Clark
2017-03-01 17:42 ` [PATCH 5/9] iommu: add qcom_iommu Rob Clark
[not found] ` <20170301174258.14618-6-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-01 23:54 ` Stephen Boyd
[not found] ` <3d0d6fc9-f8dd-933d-eda2-9a76c95bb70b-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-03-02 3:30 ` Rob Clark
2017-03-07 17:48 ` Robin Murphy
[not found] ` <e82dbbc8-c81f-13ea-6ffc-d67204afb748-5wv7dgnIgG8@public.gmane.org>
2017-03-07 22:44 ` Rob Clark
[not found] ` <CAF6AEGuH_PZsVCBKeh_=Ev39UZcdgN1Xpn5ekPbC9yr1z_ONQA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-03-09 10:14 ` sricharan
2017-03-13 13:38 ` sricharan
2017-03-13 18:19 ` Rob Clark
[not found] ` <CAF6AEGsoHwDRR02nxz_fkeSPrXBRmG_38xvkF6f0=m+Ucj_soA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-03-20 14:21 ` Sricharan R
[not found] ` <6398dcd5-812d-f746-5bd8-2288b0cc501d-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-03-20 15:11 ` Rob Clark
2017-03-01 17:42 ` [PATCH 6/9] iommu: qcom: initialize secure page table Rob Clark
[not found] ` <20170301174258.14618-7-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-03-01 22:14 ` Stephen Boyd
2017-03-01 17:42 ` [PATCH 7/9] ARM64: DT: add gpu for msm8916 Rob Clark
2017-03-01 17:42 ` [PATCH 8/9] ARM64: DT: add video codec devicetree node Rob Clark
2017-03-01 17:42 ` Rob Clark [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-03-14 15:18 [PATCH 0/9] iommu: add qcom_iommu for early "B" family devices (v2) Rob Clark
2017-03-14 15:18 ` [PATCH 9/9] ARM64: DT: add iommu for msm8916 Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170301174258.14618-10-robdclark@gmail.com \
--to=robdclark@gmail.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robin.murphy@arm.com \
--cc=sricharan@codeaurora.org \
--cc=stanimir.varbanov@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.