From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>,
linux-omap@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Subject: [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support"
Date: Sun, 5 Mar 2017 01:43:02 +0100 [thread overview]
Message-ID: <20170305004309.28259-3-sre@kernel.org> (raw)
In-Reply-To: <20170305004309.28259-1-sre@kernel.org>
This reverts commit 5a35876e2830511cb8110667fc426c6a6165a593.
Revert the removal of manual update display support in
preparation for DSI command mode panels.
Signed-off-By: Sebastian Reichel <sre@kernel.org>
[tony@atomide.com: left out unused omap_framebuffer_dirty]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/gpu/drm/omapdrm/omap_connector.c | 12 +++++++
drivers/gpu/drm/omapdrm/omap_drv.h | 4 +++
drivers/gpu/drm/omapdrm/omap_fb.c | 28 ++++++++++++++++
drivers/gpu/drm/omapdrm/omap_fbdev.c | 57 +++++++++++++++++++++++++++++---
4 files changed, 97 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index f90e2d22c5ec..7b2a9f680dce 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -205,6 +205,18 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
.mode_valid = omap_connector_mode_valid,
};
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_connector_flush(struct drm_connector *connector,
+ int x, int y, int w, int h)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+
+ /* TODO: enable when supported in dss */
+ VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h);
+}
+
/* initialize connector */
struct drm_connector *omap_connector_init(struct drm_device *dev,
int connector_type, struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 65977982f15f..5b1061586401 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -155,6 +155,8 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
struct drm_encoder *omap_connector_attached_encoder(
struct drm_connector *connector);
bool omap_connector_get_hdmi_mode(struct drm_connector *connector);
+void omap_connector_flush(struct drm_connector *connector,
+ int x, int y, int w, int h);
uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats,
uint32_t max_formats, enum omap_color_mode supported_modes);
@@ -169,6 +171,8 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
struct drm_connector *omap_framebuffer_get_next_connector(
struct drm_framebuffer *fb, struct drm_connector *from);
bool omap_framebuffer_supports_rotation(struct drm_framebuffer *fb);
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+ int x, int y, int w, int h);
void omap_gem_init(struct drm_device *dev);
void omap_gem_deinit(struct drm_device *dev);
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c
index 29dc677dd4d3..b6ae28fe3257 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.c
+++ b/drivers/gpu/drm/omapdrm/omap_fb.c
@@ -333,6 +333,34 @@ struct drm_connector *omap_framebuffer_get_next_connector(
return NULL;
}
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+ int x, int y, int w, int h)
+{
+ struct drm_connector *connector = NULL;
+
+ VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb);
+
+ /* FIXME: This is racy - no protection against modeset config changes. */
+ while ((connector = omap_framebuffer_get_next_connector(fb, connector))) {
+ /* only consider connectors that are part of a chain */
+ if (connector->encoder && connector->encoder->crtc) {
+ /* TODO: maybe this should propagate thru the crtc who
+ * could do the coordinate translation..
+ */
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ int cx = max(0, x - crtc->x);
+ int cy = max(0, y - crtc->y);
+ int cw = w + (x - crtc->x) - cx;
+ int ch = h + (y - crtc->y) - cy;
+
+ omap_connector_flush(connector, cx, cy, cw, ch);
+ }
+ }
+}
+
#ifdef CONFIG_DEBUG_FS
void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m)
{
diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index 942c4d483008..6c52a9fa4a37 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -42,8 +42,42 @@ struct omap_fbdev {
struct work_struct work;
};
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h);
static struct drm_fb_helper *get_fb(struct fb_info *fbi);
+static ssize_t omap_fbdev_write(struct fb_info *fbi, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t res;
+
+ res = fb_sys_write(fbi, buf, count, ppos);
+ omap_fbdev_flush(fbi, 0, 0, fbi->var.xres, fbi->var.yres);
+
+ return res;
+}
+
+static void omap_fbdev_fillrect(struct fb_info *fbi,
+ const struct fb_fillrect *rect)
+{
+ sys_fillrect(fbi, rect);
+ omap_fbdev_flush(fbi, rect->dx, rect->dy, rect->width, rect->height);
+}
+
+static void omap_fbdev_copyarea(struct fb_info *fbi,
+ const struct fb_copyarea *area)
+{
+ sys_copyarea(fbi, area);
+ omap_fbdev_flush(fbi, area->dx, area->dy, area->width, area->height);
+}
+
+static void omap_fbdev_imageblit(struct fb_info *fbi,
+ const struct fb_image *image)
+{
+ sys_imageblit(fbi, image);
+ omap_fbdev_flush(fbi, image->dx, image->dy,
+ image->width, image->height);
+}
+
static void pan_worker(struct work_struct *work)
{
struct omap_fbdev *fbdev = container_of(work, struct omap_fbdev, work);
@@ -88,10 +122,10 @@ static struct fb_ops omap_fb_ops = {
* basic fbdev ops which write to the framebuffer
*/
.fb_read = drm_fb_helper_sys_read,
- .fb_write = drm_fb_helper_sys_write,
- .fb_fillrect = drm_fb_helper_sys_fillrect,
- .fb_copyarea = drm_fb_helper_sys_copyarea,
- .fb_imageblit = drm_fb_helper_sys_imageblit,
+ .fb_write = omap_fbdev_write,
+ .fb_fillrect = omap_fbdev_fillrect,
+ .fb_copyarea = omap_fbdev_copyarea,
+ .fb_imageblit = omap_fbdev_imageblit,
.fb_pan_display = omap_fbdev_pan_display,
};
@@ -245,6 +279,21 @@ static struct drm_fb_helper *get_fb(struct fb_info *fbi)
return fbi->par;
}
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h)
+{
+ struct drm_fb_helper *helper = get_fb(fbi);
+
+ if (!helper)
+ return;
+
+ VERB("flush fbdev: %d,%d %dx%d, fbi=%p", x, y, w, h, fbi);
+
+ omap_framebuffer_flush(helper->fb, x, y, w, h);
+}
+
/* initialize fbdev helper */
struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
{
--
2.11.0
next prev parent reply other threads:[~2017-03-05 0:43 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-04 23:50 [PATCHv2 00/10] Nokia N950 basic display support Sebastian Reichel
2017-03-05 0:43 ` [PATCHv2 01/10] drm: omapdrm: panel-dsi-cm: Fix probe for device tree Sebastian Reichel
2017-03-05 0:43 ` [PATCHv2 02/10] drm: omapdrm: panel-dsi-cm: add regulator support Sebastian Reichel
2017-03-05 5:40 ` Tony Lindgren
2017-03-17 15:26 ` Pavel Machek
2017-03-17 15:26 ` Pavel Machek
2017-03-05 0:43 ` Sebastian Reichel [this message]
2017-03-20 11:07 ` [PATCHv2 03/10] Revert "drm: omapdrm: Remove manual update display support" Tomi Valkeinen
2017-03-20 11:07 ` Tomi Valkeinen
2017-03-20 16:14 ` Tony Lindgren
2017-03-20 16:35 ` Tomi Valkeinen
2017-03-20 16:35 ` Tomi Valkeinen
2017-03-20 16:43 ` Tony Lindgren
2017-03-05 0:43 ` [PATCHv2 04/10] drm: omapdrm: crtc: save framedone callback from dss Sebastian Reichel
2017-03-05 5:41 ` Tony Lindgren
2017-03-05 0:43 ` [PATCHv2 05/10] drm: omapdrm: crtc: detect manually updated displays Sebastian Reichel
2017-03-05 5:42 ` Tony Lindgren
2017-03-05 0:43 ` [PATCHv2 06/10] drm: omapdrm: crtc: add support for manual " Sebastian Reichel
2017-03-05 0:43 ` [PATCHv2 07/10] drm: omapdrm: plane: update fifo size on atomic update Sebastian Reichel
2017-03-05 0:43 ` [PATCHv2 08/10] drm: omapdrm: crtc: handle framedone directly Sebastian Reichel
2017-03-17 15:26 ` Pavel Machek
2017-03-17 15:26 ` Pavel Machek
2017-03-05 0:43 ` [PATCHv2 09/10] drm: omapdrm: crtc: get manual mode displays working Sebastian Reichel
2017-03-05 5:39 ` Tony Lindgren
2017-03-20 11:19 ` Tomi Valkeinen
2017-03-20 11:19 ` Tomi Valkeinen
2017-03-05 0:43 ` [PATCHv2 10/10] ARM: dts: n950: add display support Sebastian Reichel
2017-03-24 14:29 ` Tony Lindgren
2017-03-24 14:58 ` Tomi Valkeinen
2017-03-24 14:58 ` Tomi Valkeinen
2017-03-24 15:12 ` Tony Lindgren
2017-03-24 15:20 ` Tomi Valkeinen
2017-03-24 15:20 ` Tomi Valkeinen
2017-03-24 15:44 ` Tony Lindgren
2017-03-17 15:26 ` [PATCHv2 01/10] drm: omapdrm: panel-dsi-cm: Fix probe for device tree Pavel Machek
2017-03-17 15:26 ` Pavel Machek
2017-03-20 11:29 ` [PATCHv2 00/10] Nokia N950 basic display support Tomi Valkeinen
2017-03-20 11:29 ` Tomi Valkeinen
2017-03-21 9:38 ` Tomi Valkeinen
2017-03-21 9:38 ` Tomi Valkeinen
2017-03-21 9:54 ` Tomi Valkeinen
2017-03-21 9:54 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170305004309.28259-3-sre@kernel.org \
--to=sre@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.