Re: [PATCH v11 1/9] dt-bindings: mmc: Add Cavium SOCs MMC bindings

[Jan Glauber <jan.glauber@caviumnetworks.com>]

On Fri, Mar 03, 2017 at 12:47:06PM +0100, Ulf Hansson wrote:
> On 6 February 2017 at 14:39, Jan Glauber <jglauber@cavium.com> wrote:
> > Add description of Cavium Octeon and ThunderX SOC device tree bindings.
> >
> > CC: Ulf Hansson <ulf.hansson@linaro.org>
> > CC: Rob Herring <robh+dt@kernel.org>
> > CC: Mark Rutland <mark.rutland@arm.com>
> > CC: devicetree@vger.kernel.org
> >
> > Signed-off-by: Jan Glauber <jglauber@cavium.com>
> > Signed-off-by: David Daney <david.daney@cavium.com>
> > Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
> > ---
> >  .../devicetree/bindings/mmc/cavium-mmc.txt         | 60 ++++++++++++++++++++++
> >  1 file changed, 60 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> > new file mode 100644
> > index 0000000..b79e356
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
> > @@ -0,0 +1,60 @@
> > +* Cavium Octeon & ThunderX MMC controller
> > +
> > +The highspeed MMC host controller on Caviums SoCs provides an interface
> > +for MMC and SD types of memory cards.
> > +
> > +Supported maximum speeds are the ones of the eMMC standard 4.41 as well
> > +as the speed of SD standard 4.0. Only 3.3 Volt is supported.
> > +
> > +Required properties:
> > + - compatible : should be one of:
> > +   cavium,octeon-6130-mmc
> > +   cavium,octeon-6130-mmc-slot
> > +   cavium,octeon-7890-mmc
> > +   cavium,octeon-7890-mmc-slot
> > +   cavium,thunder-8190-mmc
> > +   cavium,thunder-8190-mmc-slot
> > +   cavium,thunder-8390-mmc
> > +   cavium,thunder-8390-mmc-slot
> > + - reg : mmc controller base registers
> > + - clocks : phandle
> > +
> > +Optional properties:
> > + - for cd, bus-width and additional generic mmc parameters
> > +   please refer to mmc.txt within this directory
> > + - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
> > + - cavium,dat-clk-skew : number of coprocessor clocks before sampling data
> > +
> > +Deprecated properties:
> > +- spi-max-frequency : use max-frequency instead
> > +- cavium,bus-max-width : use bus-width instead
> > +
> > +Examples:
> > +       mmc_1_4: mmc@1,4 {
> > +               compatible = "cavium,thunder-8390-mmc";
> > +               reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               clocks = <&sclk>;
> > +
> > +               mmc-slot@0 {
> > +                       compatible = "cavium,thunder-8390-mmc-slot";
> > +                       reg = <0>;
> > +                       voltage-ranges = <3300 3300>;
> > +                       vmmc-supply = <&mmc_supply_3v3>;
> 
> The vmmc supply as a regulator provides you with the voltage range,
> thus you don't need the "voltage-ranges" here. Please remove this.

OK, I'll drop these.

thanks,
Jan

> > +                       max-frequency = <42000000>;
> > +                       bus-width = <4>;
> > +                       cap-sd-highspeed;
> > +               };
> > +
> > +               mmc-slot@1 {
> > +                       compatible = "cavium,thunder-8390-mmc-slot";
> > +                       reg = <1>;
> > +                       voltage-ranges = <3300 3300>;
> > +                       vmmc-supply = <&mmc_supply_3v3>;
> 
> Ditto.
> 
> > +                       max-frequency = <42000000>;
> > +                       bus-width = <8>;
> > +                       cap-mmc-highspeed;
> > +                       non-removable;
> > +               };
> > +       };
> > --
> > 2.9.0.rc0.21.g7777322
> >
> 
> Kind regards
> Uffe