[U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board
Date: Tue, 7 Mar 2017 01:54:43 +0200	[thread overview]
Message-ID: <20170307015443.4c62c96a@i7> (raw)
In-Reply-To: <1488580175394-283464.post@n7.nabble.com>

On Fri, 3 Mar 2017 15:29:35 -0700 (MST)
xiaojimmychen <807065717@qq.com> wrote:

> Hello everyone!
> 
> I am working with my Tiny4412 board, and the u-boot version is U-Boot
> 2016.11. After burning the u-boot to sd card, and boot my board from it.
> There are some error ouput to the console. It seems like that my sd card
> doesn't initialize completely. 
> 
> I have enabled the MMC Debug configuration(CONFIG_MMC_TRACE). And the
> console output is as follow:
> 
> U-Boot 2016.11-gbf241c8-dirty (Mar 04 2017 - 06:03:43 +0800) for TINY4412
> 
> CPU:   Exynos4412 @ 1.4 GHz
> Model: Insignal Tiny4412 evaluation board based on Exynos4412
> Board: Insignal Tiny4412 evaluation board based on Exynos4412
> DRAM:  1 GiB
> WARNING: Caches not enabled
> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
> CMD_SEND:0
> 		ARG			 0x00000000
> 		MMC_RSP_NONE
> CMD_SEND:8
> 		ARG			 0x000001AA
> 		MMC_RSP_R1,5,6,7 	 0x000001AA 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0x40FF8000 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0x40FF8000 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0xC0FF8000 
> CMD_SEND:2
> 		ARG			 0x00000000
> 		MMC_RSP_R2		 0x03534453 
> 		          		 0x53303847 
> 		          		 0x80F3741D 
> 		          		 0x31010700 
> 
> 					DUMPING DATA
> 					000 - 03 53 44 53 
> 					004 - 53 30 38 47 
> 					008 - 80 F3 74 1D 
> 					012 - 31 01 07 00 
> CMD_SEND:3
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0xAAAA0520 
> CMD_SEND:9
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R2		 0x400E0032 
> 		          		 0x5B590000 
> 		          		 0x3B377F80 
> 		          		 0x0A404000 
> 
> 					DUMPING DATA
> 					000 - 40 0E 00 32 
> 					004 - 5B 59 00 00 
> 					008 - 3B 37 7F 80 
> 					012 - 0A 40 40 00 
> CMD_SEND:13
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000700 
> CURR STATE:3
> CMD_SEND:7
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000700 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:51
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:6
> 		ARG			 0x00FFFFF1
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:6
> 		ARG			 0x00FFFFF1
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:6
> 		ARG			 0x00FFFFF1
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:6
> 		ARG			 0x00FFFFF1
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:6
> 		ARG			 0x80FFFFF1
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:6
> 		ARG			 0x00000002
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:13
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:17
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:17
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:18
> 		ARG			 0x00000040
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:12
> 		ARG			 0x00000000
> 		MMC_RSP_R1b		 0x00000B00 
> ** First descriptor is NOT a primary desc on 0:1 **
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:18
> 		ARG			 0x00000031
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> CMD_SEND:12
> 		ARG			 0x00000000
> 		MMC_RSP_R1b		 0x00000B00 
> *** Warning - bad CRC, using default environment
> 
> Hit any key to stop autoboot:  0 
> CMD_SEND:0
> 		ARG			 0x00000000
> 		MMC_RSP_NONE
> CMD_SEND:8
> 		ARG			 0x000001AA
> 		MMC_RSP_R1,5,6,7 	 0x000001AA 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0x40FF8000 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0x40FF8000 
> CMD_SEND:55
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000120 
> CMD_SEND:41
> 		ARG			 0x40300000
> 		MMC_RSP_R3,4		 0xC0FF8000 
> CMD_SEND:2
> 		ARG			 0x00000000
> 		MMC_RSP_R2		 0x03534453 
> 		          		 0x53303847 
> 		          		 0x80F3741D 
> 		          		 0x31010700 
> 
> 					DUMPING DATA
> 					000 - 03 53 44 53 
> 					004 - 53 30 38 47 
> 					008 - 80 F3 74 1D 
> 					012 - 31 01 07 00 
> CMD_SEND:3
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0xAAAA0520 
> CMD_SEND:9
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R2		 0x400E0032 
> 		          		 0x5B590000 
> 		          		 0x3B377F80 
> 		          		 0x0A404000 
> 
> 					DUMPING DATA
> 					000 - 40 0E 00 32 
> 					004 - 5B 59 00 00 
> 					008 - 3B 37 7F 80 
> 					012 - 0A 40 40 00 
> CMD_SEND:13
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000700 
> CURR STATE:3
> CMD_SEND:7
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000700 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:51
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:6
> 		ARG			 0x00000002
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:55
> 		ARG			 0xAAAA0000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:13
> 		ARG			 0x00000000
> 		MMC_RSP_R1,5,6,7 	 0x00000920 
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> *CMD_SEND:17
> 		ARG			 0x00000000
> sdhci_transfer_data: Error detected in status(0x208002)!
> 		RET			 -70*
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> *CMD_SEND:17
> 		ARG			 0x00000000
> sdhci_transfer_data: Error detected in status(0x208002)!
> 		RET			 -70*
> CMD_SEND:16
> 		ARG			 0x00000200
> 		MMC_RSP_R1,5,6,7 	 0x00000900 
> *CMD_SEND:18
> 		ARG			 0x00000040
> sdhci_transfer_data: Error detected in status(0x208000)!
> 		RET			 -70*
> SD/MMC found on device 0
> *CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
> CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
>  ** ext4fs_devread read error - block
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type ***
> *CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
> CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
>  ** ext4fs_devread read error - block
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
> CMD_SEND:16
> 		ARG			 0x00000200
> 		RET			 -110
>  ** ext4fs_devread read error - block
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Wrong Image Format for bootm command
> ERROR: can't get kernel image!*
> 
> If someone knows how to fix this bug, please help me!
> 
> Thanks a lot!

Hello,

Yes, it's a known problem. You could even easily find the information
about it in google. This was posted to the U-Boot mailing list some
years ago:

    https://lists.denx.de/pipermail/u-boot/2015-October/230749.html

Jaehoon Chung promised to have a look at it, but we haven't
heard anything back since then. Right now you can try to apply
this patch and check if it helps (essentially a revert of
a276172cf32386c211c75638f6bf3c0d59ba03ba):

    https://github.com/ssvb/u-boot/commit/3dd6fdb016c088953f5f293d62d6df03a0f48d54

BTW, I can't seem to find any Tiny4412 board support code in the
current U-Boot git master branch. Are you using a patched U-Boot?
And if yes, then do you have plans to contribute these patches?

Thanks.

-- 
Best regards,
Siarhei Siamashka

     prev parent reply	other threads:[~2017-03-06 23:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-03 22:29 [U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board xiaojimmychen
2017-03-06 23:54 ` Siarhei Siamashka [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170307015443.4c62c96a@i7 \
    --to=siarhei.siamashka@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.