From: Brandon Williams <bmwill@google.com>
To: git@vger.kernel.org
Cc: Brandon Williams <bmwill@google.com>,
sbeller@google.com, pclouds@gmail.com, jonathantanmy@google.com
Subject: [PATCH v2 1/2] pathspec: allow querying for attributes
Date: Fri, 10 Mar 2017 10:59:07 -0800 [thread overview]
Message-ID: <20170310185908.171589-2-bmwill@google.com> (raw)
In-Reply-To: <20170310185908.171589-1-bmwill@google.com>
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
---
Documentation/glossary-content.txt | 21 +++++
attr.c | 17 ++++
attr.h | 1 +
dir.c | 43 ++++++++-
pathspec.c | 117 +++++++++++++++++++++++-
pathspec.h | 16 +++-
t/t6135-pathspec-with-attrs.sh | 181 +++++++++++++++++++++++++++++++++++++
7 files changed, 387 insertions(+), 9 deletions(-)
create mode 100755 t/t6135-pathspec-with-attrs.sh
diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt
index fc9320e59..6e991c246 100644
--- a/Documentation/glossary-content.txt
+++ b/Documentation/glossary-content.txt
@@ -384,6 +384,27 @@ full pathname may have special meaning:
+
Glob magic is incompatible with literal magic.
+attr;;
+After `attr:` comes a space separated list of "attribute
+requirements", all of which must be met in order for the
+path to be considered a match; this is in addition to the
+usual non-magic pathspec pattern matching.
+See linkgit:gitattributes[5].
++
+Each of the attribute requirements for the path takes one of
+these forms:
+
+- "`ATTR`" requires that the attribute `ATTR` be set.
+
+- "`-ATTR`" requires that the attribute `ATTR` be unset.
+
+- "`ATTR=VALUE`" requires that the attribute `ATTR` be
+ set to the string `VALUE`.
+
+- "`!ATTR`" requires that the attribute `ATTR` be
+ unspecified.
++
+
exclude;;
After a path matches any non-exclude pathspec, it will be run
through all exclude pathspec (magic signature: `!` or its
diff --git a/attr.c b/attr.c
index 5493bff22..7e2134471 100644
--- a/attr.c
+++ b/attr.c
@@ -603,6 +603,23 @@ struct attr_check *attr_check_initl(const char *one, ...)
return check;
}
+struct attr_check *attr_check_dup(const struct attr_check *check)
+{
+ struct attr_check *ret;
+
+ if (!check)
+ return NULL;
+
+ ret = attr_check_alloc();
+
+ ret->nr = check->nr;
+ ret->alloc = check->alloc;
+ ALLOC_ARRAY(ret->items, ret->nr);
+ COPY_ARRAY(ret->items, check->items, ret->nr);
+
+ return ret;
+}
+
struct attr_check_item *attr_check_append(struct attr_check *check,
const struct git_attr *attr)
{
diff --git a/attr.h b/attr.h
index 48ab3e1c2..442d464db 100644
--- a/attr.h
+++ b/attr.h
@@ -44,6 +44,7 @@ struct attr_check {
extern struct attr_check *attr_check_alloc(void);
extern struct attr_check *attr_check_initl(const char *, ...);
+extern struct attr_check *attr_check_dup(const struct attr_check *check);
extern struct attr_check_item *attr_check_append(struct attr_check *check,
const struct git_attr *attr);
diff --git a/dir.c b/dir.c
index 4541f9e14..2fe7acbcf 100644
--- a/dir.c
+++ b/dir.c
@@ -9,6 +9,7 @@
*/
#include "cache.h"
#include "dir.h"
+#include "attr.h"
#include "refs.h"
#include "wildmatch.h"
#include "pathspec.h"
@@ -134,7 +135,8 @@ static size_t common_prefix_len(const struct pathspec *pathspec)
PATHSPEC_LITERAL |
PATHSPEC_GLOB |
PATHSPEC_ICASE |
- PATHSPEC_EXCLUDE);
+ PATHSPEC_EXCLUDE |
+ PATHSPEC_ATTR);
for (n = 0; n < pathspec->nr; n++) {
size_t i = 0, len = 0, item_len;
@@ -209,6 +211,36 @@ int within_depth(const char *name, int namelen,
#define DO_MATCH_DIRECTORY (1<<1)
#define DO_MATCH_SUBMODULE (1<<2)
+static int match_attrs(const char *name, int namelen,
+ const struct pathspec_item *item)
+{
+ int i;
+
+ git_check_attr(name, item->attr_check);
+ for (i = 0; i < item->attr_match_nr; i++) {
+ const char *value;
+ int matched;
+ enum attr_match_mode match_mode;
+
+ value = item->attr_check->items[i].value;
+ match_mode = item->attr_match[i].match_mode;
+
+ if (ATTR_TRUE(value))
+ matched = (match_mode == MATCH_SET);
+ else if (ATTR_FALSE(value))
+ matched = (match_mode == MATCH_UNSET);
+ else if (ATTR_UNSET(value))
+ matched = (match_mode == MATCH_UNSPECIFIED);
+ else
+ matched = (match_mode == MATCH_VALUE &&
+ !strcmp(item->attr_match[i].value, value));
+ if (!matched)
+ return 0;
+ }
+
+ return 1;
+}
+
/*
* Does 'match' match the given name?
* A match is found if
@@ -261,6 +293,9 @@ static int match_pathspec_item(const struct pathspec_item *item, int prefix,
strncmp(item->match, name - prefix, item->prefix))
return 0;
+ if (item->attr_match_nr && !match_attrs(name, namelen, item))
+ return 0;
+
/* If the match was just the prefix, we matched */
if (!*match)
return MATCHED_RECURSIVELY;
@@ -339,7 +374,8 @@ static int do_match_pathspec(const struct pathspec *ps,
PATHSPEC_LITERAL |
PATHSPEC_GLOB |
PATHSPEC_ICASE |
- PATHSPEC_EXCLUDE);
+ PATHSPEC_EXCLUDE |
+ PATHSPEC_ATTR);
if (!ps->nr) {
if (!ps->recursive ||
@@ -1361,7 +1397,8 @@ static int simplify_away(const char *path, int pathlen,
PATHSPEC_LITERAL |
PATHSPEC_GLOB |
PATHSPEC_ICASE |
- PATHSPEC_EXCLUDE);
+ PATHSPEC_EXCLUDE |
+ PATHSPEC_ATTR);
for (i = 0; i < pathspec->nr; i++) {
const struct pathspec_item *item = &pathspec->items[i];
diff --git a/pathspec.c b/pathspec.c
index b961f00c8..7cd5f6e3d 100644
--- a/pathspec.c
+++ b/pathspec.c
@@ -1,6 +1,7 @@
#include "cache.h"
#include "dir.h"
#include "pathspec.h"
+#include "attr.h"
/*
* Finds which of the given pathspecs match items in the index.
@@ -72,6 +73,7 @@ static struct pathspec_magic {
{ PATHSPEC_GLOB, '\0', "glob" },
{ PATHSPEC_ICASE, '\0', "icase" },
{ PATHSPEC_EXCLUDE, '!', "exclude" },
+ { PATHSPEC_ATTR, '\0', "attr" },
};
static void prefix_magic(struct strbuf *sb, int prefixlen, unsigned magic)
@@ -87,6 +89,74 @@ static void prefix_magic(struct strbuf *sb, int prefixlen, unsigned magic)
strbuf_addf(sb, ",prefix:%d)", prefixlen);
}
+static void parse_pathspec_attr_match(struct pathspec_item *item, const char *value)
+{
+ struct string_list_item *si;
+ struct string_list list = STRING_LIST_INIT_DUP;
+
+ if (item->attr_check)
+ die(_("Only one 'attr:' specification is allowed."));
+
+ if (!value || !*value)
+ die(_("attr spec must not be empty"));
+
+ string_list_split(&list, value, ' ', -1);
+ string_list_remove_empty_items(&list, 0);
+
+ item->attr_check = attr_check_alloc();
+ ALLOC_GROW(item->attr_match,
+ list.nr,
+ item->attr_match_alloc);
+
+ for_each_string_list_item(si, &list) {
+ size_t attr_len;
+ char *attr_name;
+ const struct git_attr *a;
+
+ int j = item->attr_match_nr++;
+ const char *attr = si->string;
+ struct attr_match *am = &item->attr_match[j];
+
+ switch (*attr) {
+ case '!':
+ am->match_mode = MATCH_UNSPECIFIED;
+ attr++;
+ attr_len = strlen(attr);
+ break;
+ case '-':
+ am->match_mode = MATCH_UNSET;
+ attr++;
+ attr_len = strlen(attr);
+ break;
+ default:
+ attr_len = strcspn(attr, "=");
+ if (attr[attr_len] != '=')
+ am->match_mode = MATCH_SET;
+ else {
+ am->match_mode = MATCH_VALUE;
+ am->value = xstrdup(&attr[attr_len + 1]);
+ if (strchr(am->value, '\\'))
+ die(_("attr spec values must not contain backslashes"));
+ }
+ break;
+ }
+
+ attr_name = xmemdupz(attr, attr_len);
+ a = git_attr(attr_name);
+ if (!a)
+ die(_("invalid attribute name %s"), attr_name);
+
+ attr_check_append(item->attr_check, a);
+
+ free(attr_name);
+ }
+
+ if (item->attr_check->nr != item->attr_match_nr)
+ die("BUG: should have same number of entries");
+
+ string_list_clear(&list, 0);
+}
+
static inline int get_literal_global(void)
{
static int literal = -1;
@@ -164,6 +234,7 @@ static int get_global_magic(int element_magic)
* returns the position in 'elem' after all magic has been parsed
*/
static const char *parse_long_magic(unsigned *magic, int *prefix_len,
+ struct pathspec_item *item,
const char *elem)
{
const char *pos;
@@ -189,6 +260,14 @@ static const char *parse_long_magic(unsigned *magic, int *prefix_len,
continue;
}
+ if (starts_with(pos, "attr:")) {
+ char *attr_body = xmemdupz(pos + 5, len - 5);
+ parse_pathspec_attr_match(item, attr_body);
+ *magic |= PATHSPEC_ATTR;
+ free(attr_body);
+ continue;
+ }
+
for (i = 0; i < ARRAY_SIZE(pathspec_magic); i++) {
if (strlen(pathspec_magic[i].name) == len &&
!strncmp(pathspec_magic[i].name, pos, len)) {
@@ -252,13 +331,14 @@ static const char *parse_short_magic(unsigned *magic, const char *elem)
}
static const char *parse_element_magic(unsigned *magic, int *prefix_len,
+ struct pathspec_item *item,
const char *elem)
{
if (elem[0] != ':' || get_literal_global())
return elem; /* nothing to do */
else if (elem[1] == '(')
/* longhand */
- return parse_long_magic(magic, prefix_len, elem);
+ return parse_long_magic(magic, prefix_len, item, elem);
else
/* shorthand */
return parse_short_magic(magic, elem);
@@ -335,12 +415,18 @@ static void init_pathspec_item(struct pathspec_item *item, unsigned flags,
char *match;
int pathspec_prefix = -1;
+ item->attr_check = NULL;
+ item->attr_match = NULL;
+ item->attr_match_nr = 0;
+ item->attr_match_alloc = 0;
+
/* PATHSPEC_LITERAL_PATH ignores magic */
if (flags & PATHSPEC_LITERAL_PATH) {
magic = PATHSPEC_LITERAL;
} else {
copyfrom = parse_element_magic(&element_magic,
&pathspec_prefix,
+ item,
elt);
magic |= element_magic;
magic |= get_global_magic(element_magic);
@@ -565,26 +651,47 @@ void parse_pathspec(struct pathspec *pathspec,
void copy_pathspec(struct pathspec *dst, const struct pathspec *src)
{
- int i;
+ int i, j;
*dst = *src;
ALLOC_ARRAY(dst->items, dst->nr);
COPY_ARRAY(dst->items, src->items, dst->nr);
for (i = 0; i < dst->nr; i++) {
- dst->items[i].match = xstrdup(src->items[i].match);
- dst->items[i].original = xstrdup(src->items[i].original);
+ struct pathspec_item *d = &dst->items[i];
+ struct pathspec_item *s = &src->items[i];
+
+ d->match = xstrdup(s->match);
+ d->original = xstrdup(s->original);
+
+ ALLOC_ARRAY(d->attr_match, d->attr_match_nr);
+ COPY_ARRAY(d->attr_match, s->attr_match, d->attr_match_nr);
+ for (j = 0; j < d->attr_match_nr; j++) {
+ const char *value = s->attr_match[j].value;
+ if (value)
+ d->attr_match[j].value = xstrdup(value);
+ }
+
+ d->attr_check = attr_check_dup(s->attr_check);
}
}
void clear_pathspec(struct pathspec *pathspec)
{
- int i;
+ int i, j;
for (i = 0; i < pathspec->nr; i++) {
free(pathspec->items[i].match);
free(pathspec->items[i].original);
+
+ for (j = 0; j < pathspec->items[j].attr_match_nr; j++)
+ free(pathspec->items[i].attr_match[j].value);
+ free(pathspec->items[i].attr_match);
+
+ if (pathspec->items[i].attr_check)
+ attr_check_free(pathspec->items[i].attr_check);
}
+
free(pathspec->items);
pathspec->items = NULL;
pathspec->nr = 0;
diff --git a/pathspec.h b/pathspec.h
index 49fd823dd..83625f006 100644
--- a/pathspec.h
+++ b/pathspec.h
@@ -8,13 +8,15 @@
#define PATHSPEC_GLOB (1<<3)
#define PATHSPEC_ICASE (1<<4)
#define PATHSPEC_EXCLUDE (1<<5)
+#define PATHSPEC_ATTR (1<<6)
#define PATHSPEC_ALL_MAGIC \
(PATHSPEC_FROMTOP | \
PATHSPEC_MAXDEPTH | \
PATHSPEC_LITERAL | \
PATHSPEC_GLOB | \
PATHSPEC_ICASE | \
- PATHSPEC_EXCLUDE)
+ PATHSPEC_EXCLUDE | \
+ PATHSPEC_ATTR)
#define PATHSPEC_ONESTAR 1 /* the pathspec pattern satisfies GFNM_ONESTAR */
@@ -31,6 +33,18 @@ struct pathspec {
int len, prefix;
int nowildcard_len;
int flags;
+ int attr_match_nr;
+ int attr_match_alloc;
+ struct attr_match {
+ char *value;
+ enum attr_match_mode {
+ MATCH_SET,
+ MATCH_UNSET,
+ MATCH_VALUE,
+ MATCH_UNSPECIFIED
+ } match_mode;
+ } *attr_match;
+ struct attr_check *attr_check;
} *items;
};
diff --git a/t/t6135-pathspec-with-attrs.sh b/t/t6135-pathspec-with-attrs.sh
new file mode 100755
index 000000000..b5e5a0607
--- /dev/null
+++ b/t/t6135-pathspec-with-attrs.sh
@@ -0,0 +1,181 @@
+#!/bin/sh
+
+test_description='test labels in pathspecs'
+. ./test-lib.sh
+
+test_expect_success 'setup a tree' '
+ cat <<-EOF >expect &&
+ fileA
+ fileAB
+ fileAC
+ fileB
+ fileBC
+ fileC
+ fileNoLabel
+ fileSetLabel
+ fileUnsetLabel
+ fileValue
+ fileWrongLabel
+ sub/fileA
+ sub/fileAB
+ sub/fileAC
+ sub/fileB
+ sub/fileBC
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileSetLabel
+ sub/fileUnsetLabel
+ sub/fileValue
+ sub/fileWrongLabel
+ EOF
+ mkdir sub &&
+ while read path
+ do
+ : >$path &&
+ git add $path || return 1
+ done <expect &&
+ git commit -m "initial commit" &&
+ git ls-files >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'pathspec with no attr' '
+ test_must_fail git ls-files ":(attr:)"
+'
+
+test_expect_success 'pathspec with labels and non existent .gitattributes' '
+ git ls-files ":(attr:label)" >actual &&
+ test_must_be_empty actual
+'
+
+test_expect_success 'setup .gitattributes' '
+ cat <<-EOF >.gitattributes &&
+ fileA labelA
+ fileB labelB
+ fileC labelC
+ fileAB labelA labelB
+ fileAC labelA labelC
+ fileBC labelB labelC
+ fileUnsetLabel -label
+ fileSetLabel label
+ fileValue label=foo
+ fileWrongLabel label☺
+ EOF
+ git add .gitattributes &&
+ git commit -m "add attributes"
+'
+
+test_expect_success 'check specific set attr' '
+ cat <<-EOF >expect &&
+ fileSetLabel
+ sub/fileSetLabel
+ EOF
+ git ls-files ":(attr:label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check specific unset attr' '
+ cat <<-EOF >expect &&
+ fileUnsetLabel
+ sub/fileUnsetLabel
+ EOF
+ git ls-files ":(attr:-label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check specific value attr' '
+ cat <<-EOF >expect &&
+ fileValue
+ sub/fileValue
+ EOF
+ git ls-files ":(attr:label=foo)" >actual &&
+ test_cmp expect actual &&
+ git ls-files ":(attr:label=bar)" >actual &&
+ test_must_be_empty actual
+'
+
+test_expect_success 'check unspecified attr' '
+ cat <<-EOF >expect &&
+ .gitattributes
+ fileA
+ fileAB
+ fileAC
+ fileB
+ fileBC
+ fileC
+ fileNoLabel
+ fileWrongLabel
+ sub/fileA
+ sub/fileAB
+ sub/fileAC
+ sub/fileB
+ sub/fileBC
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileWrongLabel
+ EOF
+ git ls-files ":(attr:!label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check multiple unspecified attr' '
+ cat <<-EOF >expect &&
+ .gitattributes
+ fileC
+ fileNoLabel
+ fileWrongLabel
+ sub/fileC
+ sub/fileNoLabel
+ sub/fileWrongLabel
+ EOF
+ git ls-files ":(attr:!labelB !labelA !label)" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check label with more labels but excluded path' '
+ cat <<-EOF >expect &&
+ fileAB
+ fileB
+ fileBC
+ EOF
+ git ls-files ":(attr:labelB)" ":(exclude)sub/" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check label excluding other labels' '
+ cat <<-EOF >expect &&
+ fileAB
+ fileB
+ fileBC
+ sub/fileAB
+ sub/fileB
+ EOF
+ git ls-files ":(attr:labelB)" ":(exclude,attr:labelC)sub/" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'fail on multiple attr specifiers in one pathspec item' '
+ test_must_fail git ls-files . ":(attr:labelB,attr:labelC)" 2>actual &&
+ test_i18ngrep "Only one" actual
+'
+
+test_expect_success 'fail if attr magic is used places not implemented' '
+ # The main purpose of this test is to check that we actually fail
+ # when you attempt to use attr magic in commands that do not implement
+ # attr magic. This test does not advocate git-add to stay that way,
+ # though, but git-add is convenient as it has its own internal pathspec
+ # parsing.
+ test_must_fail git add ":(attr:labelB)" 2>actual &&
+ test_i18ngrep "unsupported magic" actual
+'
+
+test_expect_success 'abort on giving invalid label on the command line' '
+ test_must_fail git ls-files . ":(attr:☺)"
+'
+
+test_expect_success 'abort on asking for wrong magic' '
+ test_must_fail git ls-files . ":(attr:-label=foo)" &&
+ test_must_fail git ls-files . ":(attr:!label=foo)"
+'
+
+test_done
--
2.12.0.246.ga2ecc84866-goog
next prev parent reply other threads:[~2017-03-10 18:59 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 21:07 [PATCH 0/2] bringing attributes to pathspecs Brandon Williams
2017-03-09 21:07 ` [PATCH 1/2] pathspec: allow querying for attributes Brandon Williams
2017-03-09 22:19 ` Jonathan Tan
2017-03-10 18:26 ` Brandon Williams
2017-03-13 2:43 ` Junio C Hamano
2017-03-13 18:30 ` Stefan Beller
2017-03-09 21:07 ` [PATCH 2/2] pathspec: allow escaped query values Brandon Williams
2017-03-09 22:31 ` Jonathan Tan
2017-03-10 18:53 ` Brandon Williams
2017-03-09 21:22 ` [PATCH 0/2] bringing attributes to pathspecs Stefan Beller
2017-03-10 18:59 ` [PATCH v2 " Brandon Williams
2017-03-10 18:59 ` Brandon Williams [this message]
2017-03-10 19:56 ` [PATCH v2 1/2] pathspec: allow querying for attributes Jonathan Tan
2017-03-11 0:28 ` Brandon Williams
2017-03-10 18:59 ` [PATCH v2 2/2] pathspec: allow escaped query values Brandon Williams
2017-03-13 18:23 ` [PATCH v3 0/2] bringing attributes to pathspecs Brandon Williams
2017-03-13 18:23 ` [PATCH v3 1/2] pathspec: allow querying for attributes Brandon Williams
2017-03-13 18:23 ` [PATCH v3 2/2] pathspec: allow escaped query values Brandon Williams
2017-03-13 22:30 ` [PATCH v3 0/2] bringing attributes to pathspecs Junio C Hamano
2017-03-13 22:38 ` Brandon Williams
2017-03-21 10:51 ` Duy Nguyen
2017-03-21 15:51 ` Junio C Hamano
2017-03-21 16:52 ` Brandon Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170310185908.171589-2-bmwill@google.com \
--to=bmwill@google.com \
--cc=git@vger.kernel.org \
--cc=jonathantanmy@google.com \
--cc=pclouds@gmail.com \
--cc=sbeller@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.