All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	"Gautham R . Shenoy" <ego@linux.vnet.ibm.com>,
	Mahesh Jagannath Salgaonkar <mahesh@linux.vnet.ibm.com>
Subject: [PATCH 1/7] powerpc/64s: move remaining system reset idle code into idle_book3s.S
Date: Mon, 20 Mar 2017 16:01:46 +1000	[thread overview]
Message-ID: <20170320060152.1016-2-npiggin@gmail.com> (raw)
In-Reply-To: <20170320060152.1016-1-npiggin@gmail.com>

Should be no functional change.

Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 26 +------------
 arch/powerpc/kernel/idle_book3s.S    | 73 ++++++++++++++++++++++++------------
 2 files changed, 49 insertions(+), 50 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 0f54b4844399..896b439655eb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -126,31 +126,7 @@ EXC_VIRT_NONE(0x4100, 0x100)
 
 #ifdef CONFIG_PPC_P7_NAP
 EXC_COMMON_BEGIN(system_reset_idle_common)
-BEGIN_FTR_SECTION
-	GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */
-END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
-	bl	pnv_restore_hyp_resource
-
-	li	r0,PNV_THREAD_RUNNING
-	stb	r0,PACA_THREAD_IDLE_STATE(r13)	/* Clear thread state */
-
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-	li	r0,KVM_HWTHREAD_IN_KERNEL
-	stb	r0,HSTATE_HWTHREAD_STATE(r13)
-	/* Order setting hwthread_state vs. testing hwthread_req */
-	sync
-	lbz	r0,HSTATE_HWTHREAD_REQ(r13)
-	cmpwi	r0,0
-	beq	1f
-	BRANCH_TO_KVM(r10, kvm_start_guest)
-1:
-#endif
-
-	/* Return SRR1 from power7_nap() */
-	mfspr	r3,SPRN_SRR1
-	blt	cr3,2f
-	b	pnv_wakeup_loss
-2:	b	pnv_wakeup_noloss
+	b	pnv_powersave_wakeup
 #endif
 
 EXC_COMMON(system_reset_common, 0x100, system_reset_exception)
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 6fd08219248d..80ca3fd37b4e 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -20,6 +20,7 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/opal.h>
 #include <asm/cpuidle.h>
+#include <asm/exception-64s.h>
 #include <asm/book3s/64/mmu-hash.h>
 #include <asm/mmu.h>
 
@@ -113,7 +114,7 @@ core_idle_lock_held:
  *
  * Address to 'rfid' to in r5
  */
-_GLOBAL(pnv_powersave_common)
+pnv_powersave_common:
 	/* Use r3 to pass state nap/sleep/winkle */
 	/* NAP is a state loss, we create a regs frame on the
 	 * stack, fill it up with the state we care about and
@@ -188,8 +189,8 @@ pnv_enter_arch207_idle_mode:
 	/* The following store to HSTATE_HWTHREAD_STATE(r13)  */
 	/* MUST occur in real mode, i.e. with the MMU off,    */
 	/* and the MMU must stay off until we clear this flag */
-	/* and test HSTATE_HWTHREAD_REQ(r13) in the system    */
-	/* reset interrupt vector in exceptions-64s.S.        */
+	/* and test HSTATE_HWTHREAD_REQ(r13) in               */
+	/* pnv_powersave_wakeup in this file.                 */
 	/* The reason is that another thread can switch the   */
 	/* MMU to a guest context whenever this flag is set   */
 	/* to KVM_HWTHREAD_IN_IDLE, and if the MMU was on,    */
@@ -375,15 +376,42 @@ _GLOBAL(power9_idle_stop)
 	li	r4,1
 	b	pnv_powersave_common
 	/* No return */
+
+.global pnv_powersave_wakeup
+pnv_powersave_wakeup:
+BEGIN_FTR_SECTION
+	GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
+	bl	pnv_restore_hyp_resource
+
+	li	r0,PNV_THREAD_RUNNING
+	stb	r0,PACA_THREAD_IDLE_STATE(r13)	/* Clear thread state */
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	li	r0,KVM_HWTHREAD_IN_KERNEL
+	stb	r0,HSTATE_HWTHREAD_STATE(r13)
+	/* Order setting hwthread_state vs. testing hwthread_req */
+	sync
+	lbz	r0,HSTATE_HWTHREAD_REQ(r13)
+	cmpwi	r0,0
+	beq	1f
+	BRANCH_TO_KVM(r10, kvm_start_guest)
+1:
+#endif
+
+	/* Return SRR1 from power7_nap() */
+	mfspr	r3,SPRN_SRR1
+	blt	cr3,pnv_wakeup_noloss
+	b	pnv_wakeup_loss
+
 /*
- * Called from reset vector. Check whether we have woken up with
- * hypervisor state loss. If yes, restore hypervisor state and return
- * back to reset vector.
+ * Check whether we have woken up with hypervisor state loss.
+ * If yes, restore hypervisor state and return back to link.
  *
  * r13 - Contents of HSPRG0
  * cr3 - set to gt if waking up with partial/complete hypervisor state loss
  */
-_GLOBAL(pnv_restore_hyp_resource)
+pnv_restore_hyp_resource:
 BEGIN_FTR_SECTION
 	ld	r2,PACATOC(r13);
 	/*
@@ -400,12 +428,9 @@ BEGIN_FTR_SECTION
 	 */
 	rldicl  r5,r5,4,60
 	cmpd	cr4,r5,r4
-	bge	cr4,pnv_wakeup_tb_loss
-	/*
-	 * Waking up without hypervisor state loss. Return to
-	 * reset vector
-	 */
-	blr
+	bge	cr4,pnv_wakeup_tb_loss /* returns to caller */
+
+	blr	/* Waking up without hypervisor state loss. */
 
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 
@@ -433,8 +458,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	 */
 	bgt	cr3,.
 
-	blr	/* Return back to System Reset vector from where
-		   pnv_restore_hyp_resource was invoked */
+	blr	/* Waking up wihtout hypervisor state loss */
 
 /*
  * Called if waking up from idle state which can cause either partial or
@@ -446,7 +470,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
  * cr3 - gt if waking up with partial/complete hypervisor state loss
  * cr4 - gt or eq if waking up from complete hypervisor state loss.
  */
-_GLOBAL(pnv_wakeup_tb_loss)
+pnv_wakeup_tb_loss:
 	ld	r1,PACAR1(r13)
 	/*
 	 * Before entering any idle state, the NVGPRs are saved in the stack.
@@ -466,12 +490,11 @@ _GLOBAL(pnv_wakeup_tb_loss)
 	stb	r0,PACA_NAPSTATELOST(r13)
 
 	/*
-	 *
 	 * Save SRR1 and LR in NVGPRs as they might be clobbered in
-	 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required
-	 * to determine the wakeup reason if we branch to kvm_start_guest. LR
-	 * is required to return back to reset vector after hypervisor state
-	 * restore is complete.
+	 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required to
+	 * determine the wakeup reason if we branch to kvm_start_guest. LR is
+	 * required to return back to caller after hypervisor state restore is
+	 * complete.
 	 */
 	mflr	r17
 	mfspr	r16,SPRN_SRR1
@@ -651,8 +674,7 @@ hypervisor_state_restored:
 
 	mtspr	SPRN_SRR1,r16
 	mtlr	r17
-	blr	/* Return back to System Reset vector from where
-		   pnv_restore_hyp_resource was invoked */
+	blr		/* return to pnv_powersave_wakeup */
 
 fastsleep_workaround_at_exit:
 	li	r3,1
@@ -664,7 +686,8 @@ fastsleep_workaround_at_exit:
  * R3 here contains the value that will be returned to the caller
  * of power7_nap.
  */
-_GLOBAL(pnv_wakeup_loss)
+.global pnv_wakeup_loss
+pnv_wakeup_loss:
 	ld	r1,PACAR1(r13)
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
@@ -684,7 +707,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
  * R3 here contains the value that will be returned to the caller
  * of power7_nap.
  */
-_GLOBAL(pnv_wakeup_noloss)
+pnv_wakeup_noloss:
 	lbz	r0,PACA_NAPSTATELOST(r13)
 	cmpwi	r0,0
 	bne	pnv_wakeup_loss
-- 
2.11.0

  reply	other threads:[~2017-03-20  6:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-20  6:01 [PATCH 0/7][v3] idle fixes and changes for POWER8 and POWER9 Nicholas Piggin
2017-03-20  6:01 ` Nicholas Piggin [this message]
2017-03-20  6:01 ` [PATCH 2/7] powerpc/64s: stop using bit in HSPRG0 to test winkle Nicholas Piggin
2017-03-20  6:01 ` [PATCH 3/7] powerpc/64s: use alternative feature patching Nicholas Piggin
2017-03-20  6:01 ` [PATCH 4/7] powerpc/64s: fix POWER9 machine check handler from stop state Nicholas Piggin
2017-03-20 14:51   ` Nicholas Piggin
2017-03-20  6:01 ` [PATCH 5/7] powerpc/64s: idle expand core idle state bits Nicholas Piggin
2017-03-20  6:01 ` [PATCH 6/7] powerpc/64s: idle do not hold reservation longer than required Nicholas Piggin
2017-03-20  6:01 ` [PATCH 7/7] powerpc/64s: idle POWER8 avoid full state loss recovery where possible Nicholas Piggin
2017-03-20 10:11   ` Gautham R Shenoy
2017-03-20 10:26     ` Nicholas Piggin
2017-03-20 16:31       ` Gautham R Shenoy
2017-03-20 17:19         ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170320060152.1016-2-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.