From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Vasily Philipov <vasilyf@mellanox.com>
Cc: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [PATCH v3 1/2] net/mlx4: split the definitions to the header file
Date: Mon, 20 Mar 2017 10:19:34 +0100 [thread overview]
Message-ID: <20170320091934.GF12013@autoinstall.dev.6wind.com> (raw)
In-Reply-To: <01777c971a3beb586586bbe28200298c9b6e4ae4.1487853341.git.vasilyf@mellanox.com>
On Sun, Mar 05, 2017 at 09:51:31AM +0200, Vasily Philipov wrote:
> Make priv_lock/priv_unlock functions and some other structs/defines visible
> from different source files by placing them into mlx4.h header.
>
> Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
> ---
> drivers/net/mlx4/mlx4.c | 193 +-----------------------------------------------
> drivers/net/mlx4/mlx4.h | 187 +++++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 189 insertions(+), 191 deletions(-)
>
> diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
> index 79efaaa..8f6c57f 100644
> --- a/drivers/net/mlx4/mlx4.c
> +++ b/drivers/net/mlx4/mlx4.c
> @@ -1,8 +1,8 @@
> /*-
> * BSD LICENSE
> *
> - * Copyright 2012-2015 6WIND S.A.
> - * Copyright 2012 Mellanox.
> + * Copyright 2012-2017 6WIND S.A.
> + * Copyright 2012-2017 Mellanox.
> *
> * Redistribution and use in source and binary forms, with or without
> * modification, are permitted provided that the following conditions
> @@ -58,20 +58,6 @@
> #include <linux/sockios.h>
> #include <fcntl.h>
>
> -/* Verbs header. */
> -/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
> -#ifdef PEDANTIC
> -#pragma GCC diagnostic ignored "-Wpedantic"
> -#endif
> -#include <infiniband/verbs.h>
> -#ifdef PEDANTIC
> -#pragma GCC diagnostic error "-Wpedantic"
> -#endif
> -
> -/* DPDK headers don't like -pedantic. */
> -#ifdef PEDANTIC
> -#pragma GCC diagnostic ignored "-Wpedantic"
> -#endif
> #include <rte_ether.h>
> #include <rte_ethdev.h>
> #include <rte_dev.h>
> @@ -86,9 +72,6 @@
> #include <rte_log.h>
> #include <rte_alarm.h>
> #include <rte_memory.h>
> -#ifdef PEDANTIC
> -#pragma GCC diagnostic error "-Wpedantic"
> -#endif
>
> /* Generated configuration header. */
> #include "mlx4_autoconf.h"
> @@ -96,21 +79,6 @@
> /* PMD header. */
> #include "mlx4.h"
>
> -/* Runtime logging through RTE_LOG() is enabled when not in debugging mode.
> - * Intermediate LOG_*() macros add the required end-of-line characters. */
> -#ifndef NDEBUG
> -#define INFO(...) DEBUG(__VA_ARGS__)
> -#define WARN(...) DEBUG(__VA_ARGS__)
> -#define ERROR(...) DEBUG(__VA_ARGS__)
> -#else
> -#define LOG__(level, m, ...) \
> - RTE_LOG(level, PMD, MLX4_DRIVER_NAME ": " m "%c", __VA_ARGS__)
> -#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
> -#define INFO(...) LOG_(INFO, __VA_ARGS__)
> -#define WARN(...) LOG_(WARNING, __VA_ARGS__)
> -#define ERROR(...) LOG_(ERR, __VA_ARGS__)
> -#endif
> -
> /* Convenience macros for accessing mbuf fields. */
> #define NEXT(m) ((m)->next)
> #define DATA_LEN(m) ((m)->data_len)
> @@ -137,157 +105,6 @@
> (((val) & (from)) / ((from) / (to))) : \
> (((val) & (from)) * ((to) / (from))))
>
> -struct mlx4_rxq_stats {
> - unsigned int idx; /**< Mapping index. */
> -#ifdef MLX4_PMD_SOFT_COUNTERS
> - uint64_t ipackets; /**< Total of successfully received packets. */
> - uint64_t ibytes; /**< Total of successfully received bytes. */
> -#endif
> - uint64_t idropped; /**< Total of packets dropped when RX ring full. */
> - uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
> -};
> -
> -struct mlx4_txq_stats {
> - unsigned int idx; /**< Mapping index. */
> -#ifdef MLX4_PMD_SOFT_COUNTERS
> - uint64_t opackets; /**< Total of successfully sent packets. */
> - uint64_t obytes; /**< Total of successfully sent bytes. */
> -#endif
> - uint64_t odropped; /**< Total of packets not sent when TX ring full. */
> -};
> -
> -/* RX element (scattered packets). */
> -struct rxq_elt_sp {
> - struct ibv_recv_wr wr; /* Work Request. */
> - struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
> - struct rte_mbuf *bufs[MLX4_PMD_SGE_WR_N]; /* SGEs buffers. */
> -};
> -
> -/* RX element. */
> -struct rxq_elt {
> - struct ibv_recv_wr wr; /* Work Request. */
> - struct ibv_sge sge; /* Scatter/Gather Element. */
> - /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
> -};
> -
> -/* RX queue descriptor. */
> -struct rxq {
> - struct priv *priv; /* Back pointer to private data. */
> - struct rte_mempool *mp; /* Memory Pool for allocations. */
> - struct ibv_mr *mr; /* Memory Region (for mp). */
> - struct ibv_cq *cq; /* Completion Queue. */
> - struct ibv_qp *qp; /* Queue Pair. */
> - struct ibv_exp_qp_burst_family *if_qp; /* QP burst interface. */
> - struct ibv_exp_cq_family *if_cq; /* CQ interface. */
> - /*
> - * Each VLAN ID requires a separate flow steering rule.
> - */
> - BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
> - struct ibv_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES][MLX4_MAX_VLAN_IDS];
> - struct ibv_flow *promisc_flow; /* Promiscuous flow. */
> - struct ibv_flow *allmulti_flow; /* Multicast flow. */
> - unsigned int port_id; /* Port ID for incoming packets. */
> - unsigned int elts_n; /* (*elts)[] length. */
> - unsigned int elts_head; /* Current index in (*elts)[]. */
> - union {
> - struct rxq_elt_sp (*sp)[]; /* Scattered RX elements. */
> - struct rxq_elt (*no_sp)[]; /* RX elements. */
> - } elts;
> - unsigned int sp:1; /* Use scattered RX elements. */
> - unsigned int csum:1; /* Enable checksum offloading. */
> - unsigned int csum_l2tun:1; /* Same for L2 tunnels. */
> - struct mlx4_rxq_stats stats; /* RX queue counters. */
> - unsigned int socket; /* CPU socket ID for allocations. */
> - struct ibv_exp_res_domain *rd; /* Resource Domain. */
> -};
> -
> -/* TX element. */
> -struct txq_elt {
> - struct rte_mbuf *buf;
> -};
> -
> -/* Linear buffer type. It is used when transmitting buffers with too many
> - * segments that do not fit the hardware queue (see max_send_sge).
> - * Extra segments are copied (linearized) in such buffers, replacing the
> - * last SGE during TX.
> - * The size is arbitrary but large enough to hold a jumbo frame with
> - * 8 segments considering mbuf.buf_len is about 2048 bytes. */
> -typedef uint8_t linear_t[16384];
> -
> -/* TX queue descriptor. */
> -struct txq {
> - struct priv *priv; /* Back pointer to private data. */
> - struct {
> - const struct rte_mempool *mp; /* Cached Memory Pool. */
> - struct ibv_mr *mr; /* Memory Region (for mp). */
> - uint32_t lkey; /* mr->lkey */
> - } mp2mr[MLX4_PMD_TX_MP_CACHE]; /* MP to MR translation table. */
> - struct ibv_cq *cq; /* Completion Queue. */
> - struct ibv_qp *qp; /* Queue Pair. */
> - struct ibv_exp_qp_burst_family *if_qp; /* QP burst interface. */
> - struct ibv_exp_cq_family *if_cq; /* CQ interface. */
> -#if MLX4_PMD_MAX_INLINE > 0
> - uint32_t max_inline; /* Max inline send size <= MLX4_PMD_MAX_INLINE. */
> -#endif
> - unsigned int elts_n; /* (*elts)[] length. */
> - struct txq_elt (*elts)[]; /* TX elements. */
> - unsigned int elts_head; /* Current index in (*elts)[]. */
> - unsigned int elts_tail; /* First element awaiting completion. */
> - unsigned int elts_comp; /* Number of completion requests. */
> - unsigned int elts_comp_cd; /* Countdown for next completion request. */
> - unsigned int elts_comp_cd_init; /* Initial value for countdown. */
> - struct mlx4_txq_stats stats; /* TX queue counters. */
> - linear_t (*elts_linear)[]; /* Linearized buffers. */
> - struct ibv_mr *mr_linear; /* Memory Region for linearized buffers. */
> - unsigned int socket; /* CPU socket ID for allocations. */
> - struct ibv_exp_res_domain *rd; /* Resource Domain. */
> -};
> -
> -struct priv {
> - struct rte_eth_dev *dev; /* Ethernet device. */
> - struct ibv_context *ctx; /* Verbs context. */
> - struct ibv_device_attr device_attr; /* Device properties. */
> - struct ibv_pd *pd; /* Protection Domain. */
> - /*
> - * MAC addresses array and configuration bit-field.
> - * An extra entry that cannot be modified by the DPDK is reserved
> - * for broadcast frames (destination MAC address ff:ff:ff:ff:ff:ff).
> - */
> - struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
> - BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
> - /* VLAN filters. */
> - struct {
> - unsigned int enabled:1; /* If enabled. */
> - unsigned int id:12; /* VLAN ID (0-4095). */
> - } vlan_filter[MLX4_MAX_VLAN_IDS]; /* VLAN filters table. */
> - /* Device properties. */
> - uint16_t mtu; /* Configured MTU. */
> - uint8_t port; /* Physical port number. */
> - unsigned int started:1; /* Device started, flows enabled. */
> - unsigned int promisc:1; /* Device in promiscuous mode. */
> - unsigned int allmulti:1; /* Device receives all multicast packets. */
> - unsigned int hw_qpg:1; /* QP groups are supported. */
> - unsigned int hw_tss:1; /* TSS is supported. */
> - unsigned int hw_rss:1; /* RSS is supported. */
> - unsigned int hw_csum:1; /* Checksum offload is supported. */
> - unsigned int hw_csum_l2tun:1; /* Same for L2 tunnels. */
> - unsigned int rss:1; /* RSS is enabled. */
> - unsigned int vf:1; /* This is a VF device. */
> - unsigned int pending_alarm:1; /* An alarm is pending. */
> -#ifdef INLINE_RECV
> - unsigned int inl_recv_size; /* Inline recv size */
> -#endif
> - unsigned int max_rss_tbl_sz; /* Maximum number of RSS queues. */
> - /* RX/TX queues. */
> - struct rxq rxq_parent; /* Parent queue when RSS is enabled. */
> - unsigned int rxqs_n; /* RX queues array size. */
> - unsigned int txqs_n; /* TX queues array size. */
> - struct rxq *(*rxqs)[]; /* RX queues. */
> - struct txq *(*txqs)[]; /* TX queues. */
> - struct rte_intr_handle intr_handle; /* Interrupt handler. */
> - rte_spinlock_t lock; /* Lock for control functions. */
> -};
> -
> /* Local storage for secondary process data. */
> struct mlx4_secondary_data {
> struct rte_eth_dev_data data; /* Local device data. */
> @@ -335,8 +152,7 @@ struct mlx4_secondary_data {
> * @param priv
> * Pointer to private structure.
> */
> -static void
> -priv_lock(struct priv *priv)
> +void priv_lock(struct priv *priv)
> {
> rte_spinlock_lock(&priv->lock);
> }
> @@ -347,8 +163,7 @@ struct mlx4_secondary_data {
> * @param priv
> * Pointer to private structure.
> */
> -static void
> -priv_unlock(struct priv *priv)
> +void priv_unlock(struct priv *priv)
> {
> rte_spinlock_unlock(&priv->lock);
> }
> diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
> index 4c7505e..70c9ecd 100644
> --- a/drivers/net/mlx4/mlx4.h
> +++ b/drivers/net/mlx4/mlx4.h
> @@ -1,8 +1,8 @@
> /*-
> * BSD LICENSE
> *
> - * Copyright 2012-2015 6WIND S.A.
> - * Copyright 2012 Mellanox.
> + * Copyright 2012-2017 6WIND S.A.
> + * Copyright 2012-2017 Mellanox.
> *
> * Redistribution and use in source and binary forms, with or without
> * modification, are permitted provided that the following conditions
> @@ -39,6 +39,33 @@
> #include <limits.h>
>
> /*
> + * Runtime logging through RTE_LOG() is enabled when not in debugging mode.
> + * Intermediate LOG_*() macros add the required end-of-line characters.
> + */
> +#ifndef NDEBUG
> +#define INFO(...) DEBUG(__VA_ARGS__)
> +#define WARN(...) DEBUG(__VA_ARGS__)
> +#define ERROR(...) DEBUG(__VA_ARGS__)
> +#else
> +#define LOG__(level, m, ...) \
> + RTE_LOG(level, PMD, MLX4_DRIVER_NAME ": " m "%c", __VA_ARGS__)
> +#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
> +#define INFO(...) LOG_(INFO, __VA_ARGS__)
> +#define WARN(...) LOG_(WARNING, __VA_ARGS__)
> +#define ERROR(...) LOG_(ERR, __VA_ARGS__)
> +#endif
> +
> +/* Verbs header. */
> +/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic ignored "-Wpedantic"
> +#endif
> +#include <infiniband/verbs.h>
> +#ifdef PEDANTIC
> +#pragma GCC diagnostic error "-Wpedantic"
> +#endif
> +
> +/*
> * Maximum number of simultaneous MAC addresses supported.
> *
> * According to ConnectX's Programmer Reference Manual:
> @@ -160,4 +187,160 @@ enum {
> #define claim_positive(...) (__VA_ARGS__)
> #endif /* NDEBUG */
>
> +struct mlx4_rxq_stats {
> + unsigned int idx; /**< Mapping index. */
> +#ifdef MLX4_PMD_SOFT_COUNTERS
> + uint64_t ipackets; /**< Total of successfully received packets. */
> + uint64_t ibytes; /**< Total of successfully received bytes. */
> +#endif
> + uint64_t idropped; /**< Total of packets dropped when RX ring full. */
> + uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
> +};
> +
> +/* RX element (scattered packets). */
> +struct rxq_elt_sp {
> + struct ibv_recv_wr wr; /* Work Request. */
> + struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
> + struct rte_mbuf *bufs[MLX4_PMD_SGE_WR_N]; /* SGEs buffers. */
> +};
> +
> +/* RX element. */
> +struct rxq_elt {
> + struct ibv_recv_wr wr; /* Work Request. */
> + struct ibv_sge sge; /* Scatter/Gather Element. */
> + /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
> +};
> +
> +/* RX queue descriptor. */
> +struct rxq {
> + struct priv *priv; /* Back pointer to private data. */
> + struct rte_mempool *mp; /* Memory Pool for allocations. */
> + struct ibv_mr *mr; /* Memory Region (for mp). */
> + struct ibv_cq *cq; /* Completion Queue. */
> + struct ibv_qp *qp; /* Queue Pair. */
> + struct ibv_exp_qp_burst_family *if_qp; /* QP burst interface. */
> + struct ibv_exp_cq_family *if_cq; /* CQ interface. */
> + /*
> + * Each VLAN ID requires a separate flow steering rule.
> + */
> + BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
> + struct ibv_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES][MLX4_MAX_VLAN_IDS];
> + struct ibv_flow *promisc_flow; /* Promiscuous flow. */
> + struct ibv_flow *allmulti_flow; /* Multicast flow. */
> + unsigned int port_id; /* Port ID for incoming packets. */
> + unsigned int elts_n; /* (*elts)[] length. */
> + unsigned int elts_head; /* Current index in (*elts)[]. */
> + union {
> + struct rxq_elt_sp (*sp)[]; /* Scattered RX elements. */
> + struct rxq_elt (*no_sp)[]; /* RX elements. */
> + } elts;
> + unsigned int sp:1; /* Use scattered RX elements. */
> + unsigned int csum:1; /* Enable checksum offloading. */
> + unsigned int csum_l2tun:1; /* Same for L2 tunnels. */
> + struct mlx4_rxq_stats stats; /* RX queue counters. */
> + unsigned int socket; /* CPU socket ID for allocations. */
> + struct ibv_exp_res_domain *rd; /* Resource Domain. */
> +};
> +
> +/* TX element. */
> +struct txq_elt {
> + struct rte_mbuf *buf;
> +};
> +
> +struct mlx4_txq_stats {
> + unsigned int idx; /**< Mapping index. */
> +#ifdef MLX4_PMD_SOFT_COUNTERS
> + uint64_t opackets; /**< Total of successfully sent packets. */
> + uint64_t obytes; /**< Total of successfully sent bytes. */
> +#endif
> + uint64_t odropped; /**< Total of packets not sent when TX ring full. */
> +};
> +
> +/*
> + * Linear buffer type. It is used when transmitting buffers with too many
> + * segments that do not fit the hardware queue (see max_send_sge).
> + * Extra segments are copied (linearized) in such buffers, replacing the
> + * last SGE during TX.
> + * The size is arbitrary but large enough to hold a jumbo frame with
> + * 8 segments considering mbuf.buf_len is about 2048 bytes.
> + */
> +typedef uint8_t linear_t[16384];
> +
> +/* TX queue descriptor. */
> +struct txq {
> + struct priv *priv; /* Back pointer to private data. */
> + struct {
> + const struct rte_mempool *mp; /* Cached Memory Pool. */
> + struct ibv_mr *mr; /* Memory Region (for mp). */
> + uint32_t lkey; /* mr->lkey */
> + } mp2mr[MLX4_PMD_TX_MP_CACHE]; /* MP to MR translation table. */
> + struct ibv_cq *cq; /* Completion Queue. */
> + struct ibv_qp *qp; /* Queue Pair. */
> + struct ibv_exp_qp_burst_family *if_qp; /* QP burst interface. */
> + struct ibv_exp_cq_family *if_cq; /* CQ interface. */
> +#if MLX4_PMD_MAX_INLINE > 0
> + uint32_t max_inline; /* Max inline send size <= MLX4_PMD_MAX_INLINE. */
> +#endif
> + unsigned int elts_n; /* (*elts)[] length. */
> + struct txq_elt (*elts)[]; /* TX elements. */
> + unsigned int elts_head; /* Current index in (*elts)[]. */
> + unsigned int elts_tail; /* First element awaiting completion. */
> + unsigned int elts_comp; /* Number of completion requests. */
> + unsigned int elts_comp_cd; /* Countdown for next completion request. */
> + unsigned int elts_comp_cd_init; /* Initial value for countdown. */
> + struct mlx4_txq_stats stats; /* TX queue counters. */
> + linear_t (*elts_linear)[]; /* Linearized buffers. */
> + struct ibv_mr *mr_linear; /* Memory Region for linearized buffers. */
> + unsigned int socket; /* CPU socket ID for allocations. */
> + struct ibv_exp_res_domain *rd; /* Resource Domain. */
> +};
> +
> +struct priv {
> + struct rte_eth_dev *dev; /* Ethernet device. */
> + struct ibv_context *ctx; /* Verbs context. */
> + struct ibv_device_attr device_attr; /* Device properties. */
> + struct ibv_pd *pd; /* Protection Domain. */
> + /*
> + * MAC addresses array and configuration bit-field.
> + * An extra entry that cannot be modified by the DPDK is reserved
> + * for broadcast frames (destination MAC address ff:ff:ff:ff:ff:ff).
> + */
> + struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
> + BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
> + /* VLAN filters. */
> + struct {
> + unsigned int enabled:1; /* If enabled. */
> + unsigned int id:12; /* VLAN ID (0-4095). */
> + } vlan_filter[MLX4_MAX_VLAN_IDS]; /* VLAN filters table. */
> + /* Device properties. */
> + uint16_t mtu; /* Configured MTU. */
> + uint8_t port; /* Physical port number. */
> + unsigned int started:1; /* Device started, flows enabled. */
> + unsigned int promisc:1; /* Device in promiscuous mode. */
> + unsigned int allmulti:1; /* Device receives all multicast packets. */
> + unsigned int hw_qpg:1; /* QP groups are supported. */
> + unsigned int hw_tss:1; /* TSS is supported. */
> + unsigned int hw_rss:1; /* RSS is supported. */
> + unsigned int hw_csum:1; /* Checksum offload is supported. */
> + unsigned int hw_csum_l2tun:1; /* Same for L2 tunnels. */
> + unsigned int rss:1; /* RSS is enabled. */
> + unsigned int vf:1; /* This is a VF device. */
> + unsigned int pending_alarm:1; /* An alarm is pending. */
> +#ifdef INLINE_RECV
> + unsigned int inl_recv_size; /* Inline recv size */
> +#endif
> + unsigned int max_rss_tbl_sz; /* Maximum number of RSS queues. */
> + /* RX/TX queues. */
> + struct rxq rxq_parent; /* Parent queue when RSS is enabled. */
> + unsigned int rxqs_n; /* RX queues array size. */
> + unsigned int txqs_n; /* TX queues array size. */
> + struct rxq *(*rxqs)[]; /* RX queues. */
> + struct txq *(*txqs)[]; /* TX queues. */
> + struct rte_intr_handle intr_handle; /* Interrupt handler. */
> + rte_spinlock_t lock; /* Lock for control functions. */
> +};
> +
> +void priv_lock(struct priv *priv);
> +void priv_unlock(struct priv *priv);
> +
> #endif /* RTE_PMD_MLX4_H_ */
> --
> 1.8.3.1
>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
--
Nélio Laranjeiro
6WIND
next prev parent reply other threads:[~2017-03-20 9:19 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-21 14:07 [PATCH 1/2] net/mlx4: split the definitions to the header file Vasily Philipov
2017-02-21 14:07 ` [PATCH 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-02-22 8:37 ` Nélio Laranjeiro
2017-02-22 10:10 ` Nélio Laranjeiro
2017-02-22 8:37 ` [PATCH 1/2] net/mlx4: split the definitions to the header file Nélio Laranjeiro
2017-02-22 13:42 ` [PATCH v2 " Vasily Philipov
2017-02-22 19:04 ` Ferruh Yigit
2017-02-23 10:44 ` Vasily Philipov
2017-03-06 9:24 ` Ferruh Yigit
2017-02-22 13:42 ` [PATCH v2 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-03-05 7:51 ` [PATCH v3 1/2] net/mlx4: split the definitions to the header file Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro [this message]
2017-03-20 14:18 ` Ferruh Yigit
2017-03-05 7:51 ` [PATCH v3 2/2] net/mlx4: support basic flow items and actions Vasily Philipov
2017-03-20 9:19 ` Nélio Laranjeiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170320091934.GF12013@autoinstall.dev.6wind.com \
--to=nelio.laranjeiro@6wind.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=vasilyf@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.